Perenio PEIFC01 User manual

Installation and Operation Manual
for Perenio® PEIFC01
Indoor Fixed Camera
August, 2019

Installation and Operation Manual for Perenio®
PEIFC01 Indoor Fixed Camera
©Perenio IoT spol s r.o. All Rights Reserved Doc Version: 2.1.0
Page 3of 37
Introduction
Perenio® Fixed Cameras are specially designed for indoor monitoring They are used
as part of the Perenio Smart Building Management System for the purpose of
video surveillance and recording.
Such Cameras allow Users to control and hear everything happening in the area of
interest. A high-quality (Full HD) video can be maintained under poor lighting
conditions which makes sense for video recording and imaging at night time.
The present Manual contains a detailed description of the device, as well as instructions
for its installation and operation.
Copyrights
Copyright of ©Perenio IoT spol s r.o. All rights reserved.
The Perenio® trademark is owned by Perenio IoT spol s r.o. (hereinafter referred to
as the Perenio IoT). All other similar trademarks and names, as well as logos and other
symbols are the property of their respective owners*.
All materials under Perenio® tradename contained therein are protected in
accordance with international and local laws including Acts on copyrights and related
rights.
Any reproduction, copying, publication, as well as further distribution or public display
of materials contained in the present document (whether in full or in part) shall not be
allowed until an appropriate permission of the copyright owner is obtained. Any
unauthorized usage of materials contained therein may lead to civil liability and
criminal prosecution in accordance with applicable laws.
Any eventual mentioning of other company names and equipment in the present
document is made solely for the purpose of clarifying and describing the device
operation and shall not infringe on the third party’s intellectual property rights.
* ZIGBEE is the registered trademark of ZigBee Alliance; iOS is the registered trademark of CISCO TECHNOLOGY, INC.;
Android is the registered trademark of Google Inc.; Google Play is the trademark of Google Inc.; App Store is the
registered trademark of Apple Inc.; Linux is the registered trademark of Linus Torvalds

Installation and Operation Manual for Perenio®
PEIFC01 Indoor Fixed Camera
Doc Version: 2.1.0 ©Perenio IoT spol s r.o. All Rights Reserved
Page 4of 37
Responsibility and Technical Support
The present document is prepared in accordance with all necessary requirements and
contains detailed information on the device installation, configuration and control valid
as of the date of its issue.
Perenio IoT reserves the right to modify the device and make corrections or changes
to this document without prior notice of the User, and shall not be responsible for any
potential negative consequences which may arise from the use of an outdated version
of the document, as well as for any possible technical and/or typographical errors,
either omitted or accidental, or any related damage that may result from the document
transfer or the use of devices.
Perenio IoT shall make no guarantee with respect to any data contained herein
including but not limited to the device merchantability and fitness for a particular
purpose.
For any technical issues, please contact your local Perenio IoT representative or the
Tech Support Department at perenio.com.
The most common problems may be found in Section 7 of the present document and
at perenio.com where you can also download the latest version of this Installation
and Operation Manual.
Manufacturer:
Perenio IoT spol s r.o.
Na Dlouhem 79, Ricany –Jazlovice 251 01, Czech Republic
perenio.com

Installation and Operation Manual for Perenio®
PEIFC01 Indoor Fixed Camera
©Perenio IoT spol s r.o. All Rights Reserved Doc Version: 2.1.0
Page 5of 37
Conformance to Standards
The device is CE certified and complies with requirements of the
following Directives of the European Union:
2014/53/EU Radio Equipment Directive (RED);
2014/35/EU Low Voltage Directive;
2004/30/EC Electromagnetic Compatibility Directive.
The device has passed all procedures of assessments established
in Technical Regulations of the Customs Union and conforms with
standards of the Customs Union
The device complies with the requirements of Restriction of the Use
of Certain Hazardous Substances in Electronic and Electrical
Equipment (2011/65/EU Directive)
The device complies with the requirements to the level of
electromagnetic interference by the Federal Communications
Commission
The national conformity mark of the Ukraine indicating that the
device meets requirements of all applicable technical regulations
The device and supplied batteries must not be disposed of as a
household waste in accordance with the Waste Electrical and
Electronic Equipment Directive (2002/96/EC)
For the purpose of protection of the environment and human
health, both the device and batteries must be disposed of in
accordance with approved instructions on safe disposal. For more
information on proper disposal, please contact your device supplier
or local authorities responsible for waste management
Details on available Certificates are specified in Section 6 of the present document.
For copies of Certificates and Reports, please visit a corresponding Section at
perenio.com.

Installation and Operation Manual for Perenio®
PEIFC01 Indoor Fixed Camera
Doc Version: 2.1.0 ©Perenio IoT spol s r.o. All Rights Reserved
Page 6of 37
Table of Contents
Introduction .................................................................................................. 3
Copyrights..................................................................................................... 3
Responsibility and Technical Support.................................................................4
Conformance to Standards...............................................................................5
Table of Contents ........................................................................................... 6
1 General Description and Specifications............................................................8
1.1 General Purpose..................................................................................... 8
1.2 Technical Specification .......................................................................... 10
1.3 Scope of Delivery ................................................................................. 14
1.4 Packaging and Labelling ........................................................................ 14
1.5 Safe Operation Rules ............................................................................ 15
2 Installation and Setup................................................................................. 16
2.1 First Installation and Configuration ......................................................... 17
2.2 Reset to Factory Settings....................................................................... 24
2.3 Camera Rotation .................................................................................. 24
2.4 MicroSD Card Usage ............................................................................. 25
2.5 Wi-Fi Router Frequency Settings............................................................. 25
2.6 Changing the Room or Location for Cameras ............................................ 26
2.7 Using the Camera Speaker .................................................................... 26
2.8 History and Push-Notifications................................................................ 27
2.9 Upgrading the Camera Firmware ............................................................ 28
3 Maintenance and Repair.............................................................................. 29
4 Warranty Obligations.................................................................................. 30
5 Storage, Transportation and Disposal of Devices ............................................ 33
6 Other Information...................................................................................... 34
7 Troubleshooting......................................................................................... 36
8 Glossary................................................................................................... 37

Installation and Operation Manual for Perenio®
PEIFC01 Indoor Fixed Camera
©Perenio IoT spol s r.o. All Rights Reserved Doc Version: 2.1.0
Page 7of 37
Figures and Tables
Figure 1 –Front View ..................................................................................... 9
Figure 2 –Side and Back View ......................................................................... 9
Figure 3 –Viewing Angles ..............................................................................13
Figure 4 –Pan/Tilt Angles ..............................................................................13
Figure 5 –Scope of Supply.............................................................................14
Figure 6 –Examples of Installation ..................................................................16
Figure 7 –Add new device procedure (The Camera activation process).................23
Figure 8 –Camera control panel......................................................................24
Table 1 –Basic Technical Specifications of the Indoor Fixed Camera.....................10
Table 2 –Typical Errors and Troubleshooting Methods........................................36
Connection to the Perenio Smart Mobile App
A. INSTALLATION OF THE PERENIO SMART MOBILE APP.....................................18
B. DEVICE ACTIVATION BY QR CODE SCANNING...............................................20
C. SENDING WI-FI NETWORK DATA TO THE DEVICE ..........................................21
D. LOCATION AND ROOM SETTING..................................................................22

Installation and Operation Manual for Perenio®
PEIFC01 Indoor Fixed Camera
Doc Version: 2.1.0 ©Perenio IoT spol s r.o. All Rights Reserved
Page 8of 37
1 General Description and Specifications
1.1 General Purpose
The Perenio® PEIFC01 Indoor Fixed Camera is specially designed for indoor
monitoring purposes. It can be used both as an independent device and as a part of
the Perenio Smart Building Management System, when various scenarios for
device interaction are activated. A small size, drop-shaped design and a convenient
turning mechanism allow you to install the Camera in almost any part of the room
without compromising the viewing angle.
The PEIRC01 Indoor Fixed Camera has a number of distinctive features, namely:
High resolution video: Full HD 1080p, 2Mp;
Wider viewing angle: 90º;
Mechanical pan/tilt function: 350º/90º;
iOS (10.1 and higher) and Android (5.1 and higher) smartphone compatibility;
Wi-Fi connection;
MicroSD Card slot (up to 64 GB);
Real-time video recording;
Setting up of an automatic video recording (for up to 30 seconds);
Built-in IR-filter and a Night Vision mode;
Visibility at night time of up to 10-15 meters;
Arm/Disarm mode;
Alarms and Push-notifications;
Tool-free installation on a vertical surface;
Heavier base plate with an anti-slip coating to increase stability on a horizontal
surface.

Installation and Operation Manual for Perenio®
PEIFC01 Indoor Fixed Camera
©Perenio IoT spol s r.o. All Rights Reserved Doc Version: 2.1.0
Page 9of 37
Figure 1 –Front View
Figure 2 –Side and Back View
Buttons, Ports and Indicators
IR LED Panel
The panel containing eight (8) infrared LEDs activated in
the case of insufficient level of illumination which allows
the User to get a high-quality image even in the dark
Microphone
IR LED
Panel
Status
Indicator
Camera
Lens
Light
Sensor
Reset
Button
Speaker
MicroSD
Card Slot
MicroUSB
Port

Installation and Operation Manual for Perenio®
PEIFC01 Indoor Fixed Camera
Doc Version: 2.1.0 ©Perenio IoT spol s r.o. All Rights Reserved
Page 10 of 37
Camera Lens
It forms an image of the monitored area
Microphone
It allows the User to hear sounds in the monitored area
Light Sensor
It determines the level of illumination of the room and
disables the IR filter during the period of darkness to
maintain the video stream quality
Status Indicator
It blinks in the case of changing processes and statuses of
the Camera
MicroSD Card Slot
The slot for an SD Card generally intended to store video
recorded by the Camera
Reset Button
It is used to reset the device to factory settings
Speaker
It allows the User to send voice messages and thus
communicate with people and pets in the area of
monitoring
MicroUSB Port
The port to connect the Camera to the mains
ATTENTION! All Products and the Mobile Application of the Company (including
any future software and hardware whether in-house or third-party developed) are
not intended for emergency responses and cannot be used as fire-extinguishing
equipment and/or for emergency intervention, including but not limited to fires,
flooding, gas leaks or explosions, burglary and theft, as well as natural disasters
and other force majeure circumstances leading to damage and/or losses incurred
by the Client or caused to their estates, personal property and/or other products,
devices, personal data and privacy.
1.2 Technical Specification
Table 1 –Basic Technical Specifications of the Indoor Fixed Camera
Parameter
Value
Item Number
PEIFC01
Processor
HiSilicon Hi3518E V200
Operating System
Embedded Linux
Onboard Memory Chips
Flash (PN): 25Q128FVSG