Performance Furnishings PLTEAB4872E2S2MNF User manual

1 of 4
ASSEMBLY INSTRUCTIONS
MODEL: PLTEAB4872E2S2MNF+PLTEAB4872E2S2MWF24+
PLTEAB4872E3S2MNF+PLTEAB4872E3S2MWF24
!ATTENTION !
Ensure all bolts and screws are tightened, check bolts and screws every 6 months.
If any parts are missing, broken, damaged or worn, stop use of product until repairs have been made using factory authorized parts.
Failure to follow these warnings may result in injury.
ASSEMBLY INSTRUCTIONS
PLTEAB4872E2S2MNF+PLTEAB4872E2S2MWF24+PLTEAB4872E3S2MNF+PLTEAB4872E3S2MWF24
Before assembly, please remove all parts from the carton, verifying that you have the correct quantities, and read all the instructions.

2 of 4
ASSEMBLY INSTRUCTIONS
MODEL: PLTEAB4872E2S2MNF+PLTEAB4872E2S2MWF24+
PLTEAB4872E3S2MNF+PLTEAB4872E3S2MWF24
Parts List
No. Name Drawing QTY
aAdjustable Beam 1
bColumn 2
cSide Support 2
dFeet 8
eHandset 1
fScrew M6x10 8
gScrew M5x22 24
hScrew 3x19 2
iScrew 10x35 8
j4 Allen Key 4 1
j5 Allen Key 5 1
kPower Cable 1
a
b
b
c
c
Step.1
Place the Table Leg Frame on the
bottom side of the table top.
f
j4
Step.2

3 of 4
ASSEMBLY INSTRUCTIONS
MODEL: PLTEAB4872E2S2MNF+PLTEAB4872E2S2MWF24+
PLTEAB4872E3S2MNF+PLTEAB4872E3S2MWF24
B
Detail B
Tighten up the screws.
Step.5
k
d
i
j5
g
h
A
Detail A
Extend the Adjustable Beam to fit table size.
Step.3
Step.4
Put Handset's connecting
line through the hole below
the left Adjustable Beam.
d
i

4 of 4
ASSEMBLY INSTRUCTIONS
MODEL: PLTEAB4872E2S2MNF+PLTEAB4872E2S2MWF24+
PLTEAB4872E3S2MNF+PLTEAB4872E3S2MWF24
※ Important ※
Reset the table before use :
1. Press and hold ∧&∨ for more than 3 seconds.
2. Continue pressing both buttons until both columns are in the lowest position.
3. The table will rebound 2-5mm.
4. Release the buttons, now the table is operational.
Step.6
S
23 14