Performance Tool W2997 User manual

2.5 WATT SOLAR
BATTERY MAINTAINER
OWNER’S MANUAL
Item Number W2997
WARNING
It is the owner and/or operators’ responsibility to study all WARNINGS, operating, and maintenance
instructions contained on the product label and instruction manual prior to operation of this product.
The owner/operator shall retain product instructions for future reference.
The owner and/or operator are responsible for maintenance, maintaining all decals or warning
labels and while in use, maintaining the unit in good working order. If the owner and/or operator are
not fluent in English, the product warnings and instructions shall be read and discussed with the
operators’ native language by the purchaser/owner or his designee. Make sure that the operator
comprehends its contents. Safety information shall be emphasized and understood prior to usage.
The product shall be inspected per the operating instructions.
Users of this product must fully understand these instructions. Each person operating this product
must also be of sound mind and body and must not be under the influence of any substance that
might impair their vision, dexterity or judgment.
Protect yourself and others by observing all safety information.
Failure to comply with instructions could result in personal injury and/or property damage!
Please read these instructions carefully and retain them for future use.

2
SAFETY GUIDELINES / DEFINITIONS
WARNING: Read and understand this entire instruction manual before attempting to assemble, install, operate or
maintain this product. Failure to comply with the instructions may result in serious personal injury and/or property
damage!
The following signal words are used to emphasize safety warnings that must be followed when using this
product:
PRIOR TO USING THIS PRODUCT, READ AND UNDERSTANDALL INSTRUCTIONS AND SAFETY PRECAUTIONS.
This instruction manual is intended for your benefit. Please read and follow the safety, installation, maintenance and
troubleshooting steps described within to ensure your safety and satisfaction. The contents of this instruction manual are
based upon the latest product information available at the time of publication. The manufacturer reserves the right to make
product changes at any time without notice.
DANGER Indicates an imminently hazardous
situation that, if not avoided, WILL result in death or
serious injury.
WARNING Indicates a potentially hazardous
situation that, if not avoided, COULD result in death
or serious injury.
CAUTION Indicates a potentially hazardous situation
that, if not avoided, MAY result in minor or moderate
injury.
NOTICE Indicates important information, which if not
followed, MAY cause damage to equipment.
WARNING DO NOT operate this product if damaged during shipment, handling or misuse. Before each use,
inspect the general condition of the tool. Check for cracks, breaks, or bends in the equipment, and any other
condition that may affect its safe operation. If a problem occurs with the equipment, immediately discontinue its
use and have the problem corrected before further use. Do not use damaged equipment.
Please have the serial number, model number, and date of purchase available for reference when calling.
INSTALLATION PRECAUTIONS
WARNING
READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND WARNINGS BEFORE OPERATING THIS
PRODUCT. FAILURE TO DO SO MAY RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE AND
WILL VOID WARRANTY.
1. Install all sensitive electrical components (including wiring connections and battery) inside
a weatherproof enclosure to prevent electric shock.
2. Do not wire multiple panels in series.
3. This solar panel kit is not designed for tie-in to an electrical grid.
4. Use with 12 VDC batteries only.
BATTERY/SERVICE PRECAUTIONS
1. Before service, maintenance, or cleaning
dry solar panels and outdoor wiring thoroughly
while wearing splash-resistant ANSI-approved
safety goggles and electrically insulated gloves
2. Charge, store, and maintain batteries
according to the supplier’s instructions.
3. Do not stand on or otherwise apply
pressure to panel.
4. Do not allow children to play with or near
this item or electrical components.
5. Inspect at least monthly; do not use if
damaged, parts are loose, water is found
inside the housing, electrical insulation is
cracked or damaged, or connections are loose.
6. Maintain product labels and nameplates.
These carry important safety information. If
unreadable or missing, contact Performance
Tools for a replacement.
WARNING: The cord of this product contains
lead and/or di (2-ethylhexyl) phthalate (DEHP),
chemicals known to the State of California
to cause cancer, and birth defects or other
reproductive harm. Wash hands after handling.
(California Health & Safety Code § 25249.5, et seq.)
SPECIFICATIONS
Rated Output 12/24 VAC / 1.5 W
Panel Size 13-3/4 IN. L x 4-3/4 IN. W

3
LOCATION
1. Locate the Charger panel where it will
receive full, unobstructed sunlight, especially
during Mid-day. Nearby trees or tall plants will
drop debris, requiring the panel to be cleaned
more frequently.
2. The installation location for panels, charge,
and batteries must be inaccessible to children
to prevent electric shock. Build a childproof
enclosure if needed.
NOTE: Output will decrease as the panel gets
hotter than room temperature (~70° F). Angle,
solar intensity, cloud cover and other factors will
effect output.
ASSEMBLY / MOUNTING
1. Select a mounting location for the charger
frame. The solar panel should face the sun, and
not be blocked by shadows. The location should
allow The panel to be protected from accidental
damage. Before mounting, be sure that the main
cable to either the battery clamp wire or the lighter
plug wire will reach from the charger frame to the
battery to be charged.
2. Installation through 12 volt DC plug:
Plug 12 volt DC plug into any 12 volt DC socket in the
vehicle. Plug in the wire adapter so the 12 volt plug
and solar panel are connected. Make sure both ends
are secure. Position / mount solar panel so there is
no tension on either side of wiring harness.
CAUTION: Disconnect the solar battery charger
from automotive 12 V receptacle or battery terminal
before starting engine. Surges of electricity from the
engine may damage the
solar panel.
3. Installation using battery alligator clamps:
Connect the alligator battery clamps buy matching
the red clamp to the positive (+) battery terminal on
the battery. Connect the black clamp to the negative
(-) battery terminal on the battery. Plug in the wire
adapter so the alligator clamps and solar panel
are connected. Make sure both ends are secure.
Position / mount solar panel so there is no tension on
either side of wiring harness.
WARNING: If using mounting screws, do not drill
through the charger’s frame. You may damage the
frame or break the glass.
NOTE: output will decrease as the panel gets hotter
than room temperature (~70° f). Angle, solar intensity,
cloud cover and other factors will effect output.
DANGER: Follow these instructions carefully.
Connecting the Battery Alligator Clams incorrectly
can cause sparking, damage to battery, explosions,
bodily harm and even death. Consult vehicle owner’s
manual for further instructions.
WARNING: -RISK OF EXPLOSIVE GASES.
1. WORKING IN VICINITY OFALEAD-ACID
BATTERY IS DANGEROUS. BATTERIES
GENERATE EXPLOSIVE GASES DURING
NORMAL BATTERY OPERATION. FOR THIS
REASON, IT IS OF UTMOST IMPORTANCE THAT
EACH TIME BEFORE USING YOUR CHARGER,
YOU READ THIS MANUALAND FOLLOW THE
INSTRUCTIONS EXACTLY.
2. To reduce risk of battery explosion, follow
these instructions and those published by battery
manufacturer and manufacturer of any equipment
you intend to use in vicinity of battery. Review the
cautionary marking on these products and on engine.
3. When working with/near a lead acid battery.
Someone should be in range of your voice or close
enough to come to your aid when you work near a
lead acid battery.
4. Have plenty of fresh water and soap nearby in
case battery acid contact skin, clothing, or eyes.
5.
Wear complete eye protection and clothing
protection. Avoid touching eyes while working
near battery.
6. If battery acid does contact skin or clothing,
wash immediately with soap and water. If acid
entered the eye, immediately ood the eye with
running water for at least 10 minutes and get
medical attention immediately.
7. Never smoke or allow a spark of ame near battery
or engine.
8. Be extra cautious to reduce risk of dropping a
metal tool or auto part onto battery. It might spark or
short circuit battery or other electrical part that may
cause an explosion.
9. Remove personal metal items such as rings,
bracelets, necklaces, and watches when working with
a lead acid battery. A lead acid battery can produce a
short circuit current high enough to weld a ring or the
like to metal, causing personal injury.

4
1. Disconnect all panels and batteries.
2. Clean panels one at a time with mild,
non-abrasive cleanser and soft cloth and
paper towels. Do not clean with brushes or
abrasive cleaners.
3. Inspect the general condition of the
Solar Battery Charger system (panels,
batteries, and mounting). Check for loose
hardware, wiring insulation damage or
weathering, cracked glass, open housing,
cracked or broken parts, lose or corroded
contacts, and any other condition that may
affect its safe operation.
4. Inspect and maintain batteries according
to supplier’s instructions
OPERATION
Solar Panel may also be used to maintain
charge on batteries which are powering
other items, such as a car radio while the
car is parked.
1. Attach one of the two provided extensions
as needed. This kit includes battery clamps and
car lighter plug wire in addition to the charger’s
main cable.
2. The blue led will blink when the solar panel
is absorbing light.
3. Using a multi-meter a measurement
between 16 and 25 volts should be present
when in direct sunlight.
4. Do not use charger while vehicle is in use.
It could damage internal circuitry and render
charger inoperable.
5. Can be used for all types of 12 volt
batteries like ones used for cars, boats, RVs,
motorcycles, PWC and lawn tractors.
6. Solar panel is weather proof and will not be
damaged in rain but should not be exposed to
standing water or submerged.
7. This solar panel has built in blocking
circuitry to prevent reverse discharge.
SERVICING
1 YEAR LIMITED WARRANTY
PERFORMANCE TOOL® extends only the following warranties, and only to original retail purchasers. These
warranties give specific legal rights. Except where prohibited by local law, the law of the State of Washington
governs all warranties and all exclusions and limitations of warranties and remedies. There may be other rights
which vary from state to state.
PERFORMANCE TOOL® warrants the product to be free from defects in materials and workmanship under
normal use and service. A defective product may be returned for a free replacement within 90 days from the
date of purchase, provided that product is returned to place of purchase immediately after discovery of defect.
After 90 days and up to one year from date of purchase, PERFORMANCE TOOL® will replace at no charge
any parts which our examination shall disclose to be defective and under warranty. These warranties shall be
valid only when a sales receipt showing the date of purchase accompanies the defective product or defective
part(s) being returned.
These warranties exclude blades, bits, punches, dies, bulbs, fuses, hoses, and other consumables which must
be replaced under normal use and service. These warranties shall not apply to any product or part which is
used for a purpose for which it is not designed, or which has been repaired or altered in any way so as to
affect adversely its performance or reliability, nor shall these warranties apply to any product or part which has
been subject to misuse, neglect, accident or wear and tear incident to normal use and service.
PERFORMANCE TOOL® does not authorize any other person to make any warranty or to assume any liability
in connection with its products.
Except for warranties of title and the limited express warranties set forth above, PERFORMANCE TOOL®
makes no express or implied warranties of any kind with respect to its products. In particular, PERFORMANCE
TOOL® makes no implied warranty of merchantability and no implied warranty of fitness for any particular
purpose, except that for goods purchased primarily for personal, family or household use and not for
commercial or business use, PERFORMANCE TOOL® makes an implied warranty of merchantability (and, if
otherwise applicable, an implied warranty of fitness for a particular purpose), but only for the particular qualities
or characteristics, and for the duration, expressly warranted above. The laws on limitation of implied warranties
may differ from state to state, so the above limitations may not apply in all cases.
PERFORMANCE TOOL® shall not be liable for consequential, incidental or special damages resulting from or
in any manner related to any product, or to the design, use, or any inability to use the product. The sole and
exclusive remedy for a defective product or part shall be the repair, or replacement thereof as provided above.
The laws on limitation of remedies or on consequential, incidental or special damages may vary from state to
state, so the above limitations may not apply in all cases.
Check out the collection of automotive tools we offer.