Pericom PI3EQX501(I) User manual

Pericom Company Confidential
Pericom Semiconductor Corp.
www.pericom.com
Page 1 of 4
11/2/2012
PI3EQX501(I)
PI3EQX501(I) EVB Rev.A User Manual
By YT Tso, Anne Wu and Jessy Chen
Introduce:
PI3EQX501(I) is a 1-channel low power high performance 5.0Gbps signal ReDriver designed for USB3.0
protocol. The device provides programmable Equalization (EQ) and De-Emphasis (DE) to optimize
performance over a variety of physical mediums by reducing Inter-Symbol Interference (ISI)
Quick Start —For Default Setting:
To start-up the PI3EQX501(I) EVB, complete the following steps:
For TX test,
1. Check the head pin status and follow Table 1
2. Connect the JP4on EVB to PC’s USB3.0 port through a USB3.0 Type A to B cable.
3. Plug the USB3.0 device into EVB USB Type-A connector JP6through USB3.0 cable
For RX test,
4. Check the head pin status and follow Table 1
5. Connect the JP10 on EVB to PC’s USB3.0 port through a USB3.0 Type A to B cable.
6. Plug the USB3.0 device into EVB USB Type-A connector JP11 through USB3.0 cable
Figure 1(a) Top view of PI3EQX501(I) EVB Figure 1(b) Bottom view of PI3EQX501(I) EVB
Table 1--Header pin is set as defaulted on EVB.
Header pin
#
Pin name for
PI3EQX7841
Switch status
Remark
JP3
DE
Short to GND
De-emphasis setting on TX side
JP7
TRI
Open
Normal Operating mode on TX side-> RX.Detect enabled
JP8
EQ
Short to GND
Equalizer setting on TX side
JP9
VDD
Short
Power on PI3EQX501(I) both TX and RX sides.
JP12
EQ
Open
Equalizer setting on RX side
JP14
TRI
Open
Normal Operating mode on RX side-> RX.Detect enabled
JP15
DE
Short to GND
De-emphasis setting on RX side
TX
RX
JP10
JP11
TX
RX
JP4
JP16

Pericom Company Confidential
Pericom Semiconductor Corp.
www.pericom.com
Page 2 of 4
11/2/2012
Equalizer setting:
Header pin
#
Pin name for
PI3EQX501(I)
Switch status
Remark
JP8
EQ
TX
Short to GND
JP12
EQ
RX
Short to GND
De- emphasis setting:
Header pin
#
Pin name for
PI3EQX501(I)
Switch status
Remark
JP3
DE
TX
Open
JP15
DE
RX
Open
RX
TX
JP12 short to GND: EQ=3dB on RX side
JP15 short to GND: DE=0dB on RX side
JP8 short to GND: EQ=3dB on TX side
JP3 short to GND: DE=0dB on TX side
JP9 short: Power on PI3EQX501 (I)

Pericom Company Confidential
Pericom Semiconductor Corp.
www.pericom.com
Page 3 of 4
11/2/2012
PI3EQX501(I) EVB Schematic

Pericom Company Confidential
Pericom Semiconductor Corp.
www.pericom.com
Page 4 of 4
11/2/2012
PCB Layout
Figure 2, Top view of PI3EQX501(I) EVB Layout
Figure 3, Bottom view of PI3EQX501(I) EVB Layout