Perlegear PGTVS16 User manual

Thank you for choosing this Perlegear product! At Perlegear we strive to
provide you with the best quality products and services in the industry.
Should you have any issues, please don't hesitate to contact us at
Technical Support:
(US/CA)1-800-456-5231 Mon-Fri 8am - 8pm(CST)
(UK)44-808-196-4165 Mon-Fri 2pm - 10pm(UTC)
Other Info:
[email protected]
Table Top TV Stand Instruction Manual
V1.0
Model: PGTVS16

IMPORTANT SAFETY INSTRUCTIONS
Please carefully read all instructions before attempting installation. If you do
not understand the instructions or have any concerns or questions, please
contact our customer service at [email protected].
CAUTION: Avoid potential personal injuries and property damage!
Do not use this product for any purpose that is not explicitly specified in this
manual. Do not exceed weight capacity. We are not liable for damage or
injury caused by improper mounting, incorrect assembly or inappropriate use.
Weight Restrictions
DO NOT exceed the maximum weight
indicated. This TV stand is intended for use
only within the maximum weights indicated.
Use with products heavier than the
maximum weights indicated may result in
failure of the TV stand and its accessories,
causing possible damage and or injury.
WARNING
Check the VESA Pattern of TV Before the Installation
100 mm ≈ 4 in.
75 mm ≈ 3 in.
200 mm ≈ 7 7/8 in.
MAX:
200mm/8 in.
MAX
:
200mm/8 in.
Minimum VESA pattern: 75mm/3 in.(W) x 75mm/3 in.(H)
If your TV VESA is greater than 200x200 mm/8x8 in. or less than
VESA 75x75mm/3x3 in., this TV stand is NOT compatible.
If this TV stand is NOT compatible, please contact customer service
at [email protected] to find a compatible product.
45 lbs.
(20.4 kg)
If your TV weighs more, this
TV stand is NOT compatible.
01 02 03 04 05 06 07 08 09

(G) x1
5/32 in.(4mm)
Small Allen Key
(E) x4
Foot Pad
(C) x3
φ6.5xφ16x1.0
Washer
(B) x3
M6×25mm
Bolt
Tools Needed [Not Included]
Phillips Screwdriver
Supplied Parts and Hardware for Step 1
Supplied Parts and Hardware
WARNING: This product contains small items that could be a choking
hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. Do not
use damaged or defective parts. lf you require replacement parts, contact our
customer service at [email protected].
• Please note: Not all hardware included in this package will be used.
(01) x1
Tempered Glass Base
(02) x1
Support Pillar
(03) x1
Plastic Cover
[05] Bolt
Supplied Parts and Hardware for Step 2
Note: The bolts are shown in actual size
M4 [TV1] x4
M4 x 12mm
Bolt
[TV2] x4
M4 x 30mm
Bolt
01 02 03 04 05 06 07 08 09

Supplied Parts and Hardware for Step 3
(D) x2
φ8.5xφ20x1.5
Washer
(G) x1
13/64 in.(5mm)
Large Allen Key
(A) x2
M8x36mm
Bolt
(F) x2
Wire Clip
M6 [TV3] x4
M6 x 15mm
Bolt
[TV4] x4
M6 x 35mm
Bolt
M8 [TV5] x4
M8 x 15mm
Bolt
[TV6] x4
M8 x 35mm
Bolt
[06] Washer
If necessary
[07] Spacers
If necessary
Note: The washer and spacers are shown
in actual size
[TV9] x4
22mm
[TV8] x4
2.5mm
[TV7] x4
M4/M6 Washer
(04) x1
Faceplate
01 02 03 04 05 06 07 08 09

E
01
Place foot pad [E] on the bottom of the tempered glass
base [01] in the corners.
Step 1-1
Step 1 Assemble the Base
Note：Kindly note that the tempered glass base is designed
to show the shiny glass side facing up
Attach the support pillar [02] to tempered glass base [01] using
plastic cover [03], washers [C], bolts [B] and small Allen key [G]
Step 1-2
Table
02
G
03
02
01
C
B
G
Small
Allen Key
Note: Make sure the bolts
are firmly tightened.
01 02 03 04 05 06 07 08 09

Select TV Bolts
M6M4 M8
Only one bolt size fits your TV.
Bolt length: Verify adequate thread engagement with bolt or bolt/spacers
combination. We recommend thread engagement by at least 5 turns.
-Too short will not hold the TV.
-Too long will damage the TV.
Please Note: When using the spacers it is important to note that they can be
used in multi-layers (meaning stacked). If you have any difficulty understanding
how to install the TV bolts or spacers, please contact customer service at
[email protected].
Step 2 Secure the Faceplate to a TV
75mm(3 in.)
75mm(3 in.)
100mm(4 in.)
100mm(4 in.)
200mm(8 in.)
200mm(8 in.)
Suitable for VESA hole pattern:
3x3 in.(75x75mm)
4x4 in.(100x100mm)
8x8 in.(200x200mm)
8x4 in.(200x100mm)
01 02 03 04 05 06 07 08 09

Option A (For Flat Back TV)
TV7
TV1/TV3/TV5
04
TV7
TV8/TV9
TV2/TV4/TV6
04
(if needed)
(if needed)
Option B (For Round Back TV)
Alternate
Spacer
Setups
UP
CAUTION: Ensure the faceplate
[04] is EQUALLY CENTERED on
your TV and securely fastened in
place.
Please note: The bolt hole
locations on your TV may vary in
accordance of the manufacturers
design of the TV. We are only
illustrating possible locations of
the bolt holes.
01 02 03 04 05 06 07 08 09

TV7
(if needed)
TV2/TV4/TV6
04
TV8/TV9
(if needed)
TV8/TV9
Option C (For TV with A “Bump”)
Alternate
Spacer
Setups
Option D
For cable interference or inset holes,
use spacers [TV8] and [TV9] to create
extra space between the TV and
faceplate
Alternate
Spacer
Setups
TV2/TV4
TV6
TV7
04
TV8/TV9TV8/TV9
(if needed)
01 02 03 04 05 06 07 08 09

Step 3 Connect the Faceplate to Support Pillar
Note: There are three choices
for height adjustment
First Choice for
Height Adjustment
Second Choice for
Height Adjustment
Third choice for
height Adjustment
HEAVY! You may need
assistance with this
step.
3-1 Hang the TV to the support
pillar [02]
02
A
G
Large
Allen Key
D
HEAVY! You may need
assistance with this
step.
3-2 Tighten the bolts [A] and
washers [D] only the washers
are pulled firmly against the
support pillar [02]
01 02 03 04 05 06 07 08 09

If necessary, the faceplate
or TV can be swivelled
manually
Step 4 Swivel Adjustment
Manage the wires
F
01 02 03 04 05 06 07 08 09

Thank you again
for choosing this Perlegear product!
All of us at Perlegear do appreciate your product purchase. We hope that you
are as happy with your product as we designing and manufacturing it for you.
We strive to provide you with the best quality products and services in the
industry. If you have any questions please don't hesitate to contact us at
Technical Support:
(US/CA)1-800-456-5231 Mon-Fri 8am - 8pm(CST)
(UK)44-808-196-4165 Mon-Fri 2pm - 10pm(UTC)
Other Info:
[email protected]