Perlegear PGSS2 User manual

V1.0
Speaker Floor Stand Instruction Manual
Model: PGSS2
Thank you for choosing this Perlegear product! At Perlegear we strive
to provide you with the best quality products and services in the
industry. Should you have any issues, please don't hesitate to contact
us at [email protected](US/CA)

•Check package contents against Supplied Parts and Hardware List to assure that all
components were received undamaged. Do not use damaged or defective parts. lf you
require replacement parts, contact customer service at [email protected].
•Carefully read all instructions before attempting installation. If you do not
understand the instructions or have any concerns or questions, please contact customer
service at [email protected].
•This product may contain moving parts. Use with caution.
•Do not use this product for any purpose that is not explicitly specified in this manual. Do
not exceed weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly or inappropriate use.
IMPORTANT SAFETY INSTRUCTIONS
Phillips Screwdriver
TOOLS NEEDED (NOT INCLUDED)
SUPPLIED PARTS
Tempered Glass Base
[01] x2
Decorative Cover
[04] x2
Speaker Bracket
[06] x2
Support Post
[02] x4
Connector
[03] x2
Sponge
[05] x4
HARDWARE KIT
Rubber Pad
[D] x10
M4 Allen Key
[E] x1
Bolt
M6x16mm
[A] x2
Plastic washer
Ø8.4*Ø19*T0.8mm
[B] x2
Inner Hexagon Bolt
M6x25mm
[C] x2
01 02 03 04 05

STEP 1 Secure the Support Post to the Tempered Glass Base
01
D
04
B
C02
01
01 02 03 04 05

STEP 2 Assemble the Support Post
02
03
02
03
02
03
02
①
②
03
③
01 02 03 04 05

STEP 3 Secure the Speaker Bracket to the Support Post
A
06
02
05
01 02 03 04 05

STEP 4 Adjust the Width of Speaker Bracket According to the
Speaker
Loosen
Speaker
Tighten
01 02 03 04 05

Thank you again for
choosing this Perlegear product!
All of us at Perlegear do appreciate your product purchase. We hope that you
are as happy with your product as we designing and manufacturing it for you.
We strive to provide you with the best quality products and services in the
industry. If you have any questions please don't hesitate to contact us at
[email protected](US/CA)