Perlegear PGSS2 User manual

1
SPEAKER FLOOR STAND
Model PGSS2
V1
CAUTION: Avoid potential personal injuries and property damage!
Do not use this product for any purpose not explicitly specified by manufacturer.
Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
If you do not understand the instructions or have any concerns or questions, please contact a qualified installer or
perlegear customer serverce at [e-mail]
Please check www.perlegear.com and www.perlegearshop.com for more products and company information!

3
The PGSS2 stands are designed to support satellite speakers.
Specications:
Speaker maximum weight - DO NOT EXCEED: 3.6 kg (8.0 lbs)
CAUTION: Avoid potential personal injuries and property damage!
Do not use this product for any purpose not explicitly specified by manufacturer.
Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE
If you do not understand the instructions or have any concerns or questions, please contact a qualified installer or
perlegear customer serverce at [e-mail]
Please check www.perlegear.com and www.perlegearshop.com for more products and company information!
2.52
64.0
38.00
965.2
165
711.2
300
28.00
11.80
6.50
6.50
[165]
11.80
[300]
39.0
[990.6]
2.52
[64.0]
26.0
[660.4]

4
[01] x 2
[02] x 2
[03] x 2 [04] x 8
M6 x 20
[17] x 1
[16] x 4
1/4-20 x 1/2 in.
[15] x 4
M5 x 12mm
[11] x 2
[10] x 2
[14] x 2
1/4-20 x 12mm
[07] x 2
[13] x 2
M5 x 12mm
[12] x 2
[09] x 2
[08] x 2
[06] x 8
[05] x 8
M6
Supplied Parts and Hardware
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged
item to your dealer; contact Customer Service. Never use damaged parts!
Required Tools
1 Assembly
OR
A
[04]
[05]
[03]
The ends of the Carpet Spikes [04] are sharp and may scratch ooring or be hazardous
to small children. Sanus includes optional Rubber Feet [06]. If Rubber Feet are used,
twist them into the Base [03].
[03]
[06]
Screw driver

5
B
C
[03]
[07]
[17]
[01]
[03]
[03] [03]
[01]
[01]
[02]
[01]
[02]

6
2 Mounting Options
A
B
A.1 A.2
[08]
[13 ]
[12]
[13]
[11] [14]
[09]
[10]
[10]
[15] or [16]
[15] or [16]
OR
OR

7
3 Wire Routing
CAUTION: Disconnect the speaker wire from the
receiver or amplier when routing the wire through the
upper and lower pillar and out through the base to avoid
damage to the speakers, amplier, or receiver.

Perle electronics hardware (Hongkong) Co., Limited (collectively, “Perle electronics hardware”), intend to
make this manual accurate and complete. However, Perle electronics hardware makes no claim that the
informations contained harein covers all details, conditions, or variations.
Nor does it provide for every possible contingency in connection with the installation or use of this product.
The information contained in this document is subject to change without notice or obligation of any kind.
Perle electronics hardware makes no representation of warranty, expressed or implied, regarding the infor-
mation contained harein . perle electronics hardware assumes no responsibility for accuracy, completeness
or sufficiency of the information contained in this document.
Perlegear is a Perle electronics hardware brand. Perlegear and the Perlegear logo are trademarks of Perle
electronics hardware.
Perle electronics hardware Clobal Headquarters • Room 1505 Building 17/F NO.3，Kwai Cheong Rd Nt，
HongKong •
Any questions please contact : [email protected]
Please check www.perlegear.com and www.perlegearshop.com for more products and company information!
Made in China.