Perma child safety Playpen Barrier User manual

Playpen Barrier
Fits openings 73cm - 3.7m
AFTER SALES SUPPORT
[email protected]
Product Code: 2747, 2751
IMPORTANT! READ AND FOLLOW
THESE INSTRUCTIONS CAREFULLY
AND KEEP FOR FUTURE REFERENCE.
This product complies with safety standard EN 12227:2010.
For installation video, visit
www.permachildsafety.com/playpen-
barrier-installation-video

Playpen Barrier User Guide
2
Parts List
A. 5x Barrier panel
B. 1x Gate panel
C. 1x Top underside wall bracket
D. 1x Top topside wall bracket
E. 2x Lower wall bracket
F. 1x Top cap
G. 1x Bottom cap
H. 8x Screws
I. 7x Corner tubes
F
G
I
H
If any parts are missing do not attempt to use your Playpen Barrier.
Please call after sales support to obtain replacements.
Only use parts supplied by the manufacturer with your Playpen Barrier.
DC
A
B
E

Playpen Barrier User Guide
3
Safety Information
WARNING
WHEN USED AS A SAFETY BARRIER:
WARNING - Incorrect fitting or positioning of this safety barrier can be dangerous.
WARNING - Do not use the safety barrier if any components are damaged or
missing.
WARNING - Never install this product on glass doors or windows.
WARNING - Stop using the product if the child is able to climb or dislodge barrier.
WARNING - A maximum of 6 panels including gate can be used as a safety barrier.
WARNING - Danger to older children if climbing over the barrier.
WARNING - Regularly check that the barrier is properly fixed and secure.
WARNING - Any additional or replacement parts should only be obtained from
after sales support call 1300 467 068.
WARNING - This safety gate is suitable for openings from 73cm to 370cm.
WHEN USED AS A PLAYPEN:
WARNING - This safety barrier is intended for use with children 6 to 24 months or
small to medium pets.
WARNING - Do not use the playpen without the PERMA Products play mat base.
WARNING - Do not place the playpen close to an open fire or other heat source.
WARNING - Do not leave anything in the playpen which may provide a foothold or
create a danger of suffocation or strangulation.
WARNING - Check regularly that all assembly fittings are tightened properly.
WARNING - Ensure that the playpen is fully erected and all the locking
mechanisms engaged before placing your child in this playpen.
WARNING - Do not use the playpen if any part is broken, torn or missing and use
only spare parts approved by manufacturer, accessories which are
not approved by manufacturer shall not be used.
WARNING - Check regularly that all assembly fittings are tightened properly.
CLEANING:
WARNING - Clean using a damp cloth or sponge and a mild detergent.
Towel or air dry.

Playpen Barrier User Guide
4
General Assembly
2
3
To Remove Unwanted Panels
Turn base knob to the unlocked position, pull up on the corner tube and slide the bottom of the corner
tube out from the base. With the corner tube removed you can lift and remove the unwanted panel.
Locked
Unlocked
1
Select the appropriate fixing method from the following list. This barrier must only be fixed to a
solid and secure surface. To install you will need a Phillips screwdriver, pencil and drill.
Timber Plasterboard Hard wall
Timber Fixing
Drill 2mm pilot holes and
use the timber screws
provided screwing directly
into the timber.
Hard Wall Fixing
(Concrete or Brick)
Hard wall surfaces require
expandable wall plugs (not
supplied), these are available
at all DIY retailers.
Plaster Board Walls
Locate timber stud and
follow timber fixing
instructions. Plaster board
walls without studs require
expandable wall plugs (not
supplied), these are available
at all DIY retailers.
If unsure, check with a qualified builder or tradesperson that the installation you intend is
suitable and safe within the chosen location.

Playpen Barrier User Guide
5
Adding Extra Panels
Align opposite ends of panels, place the corner tube into the top hole first, pull the corner tube
up so you can position the bottom of the corner tube into the bottom hole.
Turn the base knob into locked position to secure panels.
2
1
Locked
Unlocked
3

Playpen Barrier User Guide
6
Underside Bracket Wall Assembly
NOTE: Place Lower Wall Bracket (F) over Corner Tube (J) before assembly.
Expanded:
Assembled:
I
G
G
C
C
E
E
A
1x Bottom Cap
1x Lower Wall Bracket
1x Top Underside Wall Bracket
Parts Required:

Playpen Barrier User Guide
7
1. Mark screw positions with pencil.
2. Disassemble and screw in Top Underside Wall Bracket (C) and Lower Wall Bracket (E).
3. Reassemble Panel A, Corner Tube (I) and Bottom Cap (G) into Top Underside Wall Bracket (C)
and Lower Wall Bracket (E).
C
E
G
I
G
C
E
A
3
1 2

Playpen Barrier User Guide
8
Topside Bracket Wall Assembly
NOTE: Place Lower Wall Bracket (E) over Corner Tube (I) before assembly.
I
B
F
E
D
Expanded:
Assembled:
1x Lower Wall Bracket
1x Top Topside Wall Bracket
Parts Required:
1x Top Cap
F
E
D

Playpen Barrier User Guide
9
1. Mark screw positions with pencil.
2. Disassemble and screw in Top Topside Wall Bracket (D) and Lower Wall Bracket (E).
3. Reassemble Panel A, Corner Tube (I) and Top Cap (F) into Top Topside Wall Bracket (D)
and Lower Wall Bracket (E).
E
D
I
B
F
E
D
F
1 2
3

Playpen Barrier User Guide
10
Operation
Using one hand place thumb on the button and grip gate with fingers. Slide button and lift gate,
then open gate in either direction, when released gate will swing closed automatically.
Always check gate is properly closed.
Up to 3 panels including the gate may be used in open configurations providing the 2 end
panels are securely fixed to a wall with the fixings provided.
To enable stay open feature, completely open gate to a 90° angle.
2
1
90°

Playpen Barrier User Guide
11
Using Playpen Barrier as Room Divider or Safety Barrier
Up to 6 panels including the gate may be used in open configurations providing the 2 end
panels are securely fixed to a wall with the fixings provided.

Playpen Barrier User Guide
12
Playpen Assembly
1. Align Panel A and Panel B/C, place the corner tube into the top hole first, pull the corner tube
up so you can position the bottom of the corner tube into the bottom hole.
2. Align arrow with hexagon icon. Do this for all corners.
3. Turn the base knob into locked position to secure panels.
1
Locked
Unlocked
3
1 2
3

Playpen Barrier User Guide
13
Safety Play Mat (Sold Separately)
Note: A safety play mat is required if playpen is used with children. The play mat is available
separately, contact after sales support for details.
Your child’s play mat can now be placed into the playpen and secured to the bottom bars of
each panel with the ties.
1. Release corner tube. 2. Place loop of play mat under the playpen.
3. Install corner tube through loop and fix.

Playpen Barrier User Guide
14
Warranty Certicate
Congratulations! You have made an excellent choice of this quality product. Our commitment to quality also
includes our service. Should you, contrary to expectations, experience defects due to manufacturing faults,
we will provide you with a warranty against defects as follows:
Warranty
The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from
the date of purchase. Defects that occur within this warranty period, under normal use and care, will be
repaired, replaced or refunded at our discretion. The benefits conferred by this warranty are in addition to all
rights and remedies in respect of the product that the consumer has under the Competition and Consumer
Act 2010 and similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and the failure does not amount to a major failure.
Proof of Purchase
This warranty is valid for the original purchase and is not transferable. Please keep your purchase docket,
tax invoice or receipt as the best proof of purchase, and as proof of date on which the purchase was made.
Extent of Warranty
This warranty is limited to defects in workmanship or parts. All defective products or parts will be repaired
or replaced. This warranty does not cover consumable items.
Normal Wear and Tear
This warranty does not cover normal wear and tear to the products or parts.
Exclusions
This warranty does not cover:
• Any defects caused by an accident, misuse, abuse, improper installation or operation, lack of reasonable
care, unauthorised modification, loss of parts, tampering or attempted repair by a person not authorised
by the distributor.
• Any product that has not been installed, operated or maintained in accordance with the manufacturer’s
operating instructions provided with the product.
• Any product that has been used for purposes other than domestic use.
To Make a Claim
If a defect in the goods appears within 12 months, you are entitled to claim a warranty. Please contact after
sales support via the link below:
www.permachildsafety.com/contact
Please ensure that you have a copy of proof of purchase so that we are able to respond as quickly and
efficiently as possible.

15
Playpen Barrier
Warranty Card
AFTER SALES SUPPORT
[email protected]
Product Code: 2747, 2751
Details:
Product Name: Playpen Barrier
Product Number: 2747, 2751
Your Name: _______________________________________________________
Address: _________________________________________________________
________________________________________________________________
Phone:___________________________________________________________
Email: ___________________________________________________________
Date of Purchase: __________________________________________________
Location of Purchase:________________________________________________
We recommend that you keep a copy of your receipt, showing the date of purchase,
with this warranty certificate and keep for your reference.
In the event of a product fault, please contact after sales support. Ensure that you
include the product details (as shown on this card) so that we are able to respond as
quickly and efficiently as possible.