Perma child safety 2748 User manual

Extra Wide
IMPORTANT! READ AND
FOLLOW THESE INSTRUCTIONS
CAREFULLY AND KEEP FOR
FUTURE REFERENCE.
This product complies with safety standard EN 12227:2010.
Instruction Manual
Barrier
#2748
73cm - 194cm | (28.7” - 76.3’’)
75cm
(30’’)
Tall
INSTALLATION VIDEO

2
TABLE OF
CONTENTS
SAFETY INFORMATION
General
Maintenance
Warnings
Mountings
WHAT’S IN THE BOX
Parts
INSTALLATION
Gate Placement
Underside Bracket Wall Assembly
Topside Bracket Wall Assembly
To Remove Unwanted Panels
To Add Extra Panels
Optional Extension
OPERATION
How to Open
Stay Open Feature
Cleaning Instructions
SUPPORT
Warranty Certicate
Warranty Card
After Sales Support
03
03
04
06
08
10
11
14
17
18
19
20
20
21
22
23
23

3
SAFETY
INFORMATION
Read this instruction manual carefully and keep it in a safe place for
future reference. The correct use and maintenance of this product is
essential.
Regularly check that the gate is functioning correctly, lubricate
hinges and moving components with a suitable spray lubricant.
Tighten and adjust mounts to ensure secure smooth operation.
Inspect all components regularly and stop using if any component is
damaged or missing.
GENERAL
MAINTENANCE

4
To prevent serious injury or death, securely
install gate or enclosure and use according to
manufacturer’s instructions.
Incorrect installation can be dangerous.
Danger to older children if climbing over the
product.
Do not use the safety barrier if any components are
damaged, missing or disassembled.
The safety barrier must not be tted across
windows.
Never install this product on glass doors. Install this
product against reliable doors or walls.
If the safety barrier is used at the top of the stairs, it
should not be positioned below the top level.
If the safety barrier is used at the bottom, it should
be positioned at the front of the lowest tread
possible.
This safety barrier is for domestic use only.
This safety barrier has an manual closing system.
Never leave the child unattended when using this
product.
Make sure the product to be installed is horizontal
and at on the oor.
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNINGS

5
This safety barrier has a ‘stay open’ feature.
Always check that the safety barrier is correctly
closed.
Use only with the locking/latching mechanism
securely engaged.
Never use with a child able to climb over or
dislodge/open the gate or enclosure.
Regularly check that the safety barrier is properly
installed and secure.
Any additional or replacement parts should be
obtained from after sales support.
Barrier must be tted between rigid surfaces such
as plaster board, timber or hard wall.
This product is intended for use with children from
6 to 24 months or small to medium pets from
4.5kg (10 lbs) up to 18kg (40 lbs).
Do not put any goods which can be grabbed by
children or pets near this product to prevent injury.
Before using this product, carefully inspect for any
loose parts and whether any parts need to be
tightened.
Never use to keep child away from pool.
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNINGS

6
MOUNTINGS
Gate must be installed in a structurally sound opening.
Ensure mounting surface (wall, door frame, stair posts, etc.) is
strong, rigid and has an even surface.
Note: If using gate on stairs, it must be placed either on the top
step or on the lowest step at the bottom.
Select the appropriate xing method from the following list.
Drill 2mm (5/64’’) pilot holes
and use the wood screws pro-
vided screwing directly into the
wood.
WOOD MOUNTING
Locate the wood stud and
follow the wood mounting
instructions. Do not mount
into dry wall without
additional support.
DRY WALL MOUNTING
Wood Screws
FOR INSTALLATION
SAFETY INFORMATION

7
Drill 5mm (3/16’’) pilot holes,
insert anchor and secure with
screws.
Drill 5mm (3/16’’) pilot holes,
insert anchor and secure
with screws.
Wood Screws
Anchor
HARD WALL MOUNTING
BRICK
HARD WALL MOUNTING
CONCRETE
FOR
INSTALLATION
This gate must only be xed to a solid and secure surface. If unsure,
check with a qualied builder or trades person that the installation
you intend is suitable and safe within the chosen location.
PENCIL DRILL
TOOLS REQUIRED
PHILLIPS HEAD
SCREW DRIVER

8
2 x
Barrier Panels
1 x
Gate Panel
UNDERSIDE TOPSIDE
PARTS
WHAT’S IN THE BOX

9
1 x
Top Underside
Wall Bracket
2 x
Lower Wall Bracket
8 x
Screws
1 x
Top Cap
1 x
Top Topside
Wall Bracket
1 x
Bottom Cap
4 x
Corner Tubes
If any parts are missing do not attempt to use your Extra Wide Barrier.
Please contact us at www.permachildsafety.com/contact-us to obtain
replacements. Only use parts supplied by the manufacturer with your
Extra Wide Barrier.

10
STEP 1:
GATE PLACEMENT
INSTALLATION
As a Fire Barrier;
In an open space
As a Barrier;
Across the room
SUITABLE PLACEMENT OF GATE AND CATCH MOUNT

11
Place the Lower Wall Bracket over Corner Tube, and then put
the Corner Tube into the Top Underside Wall Bracket.
Put the Top Underside Wall Bracket into the top of the Barrier
Panel, and the bottom into the bottom of the Barrier Panel, and
then into the Bottom Cap.
1.
2.
STEP 2: UNDERSIDE
BRACKET WALL ASSEMBLY

12
Mark screw hole positions with a pencil for the Top Underside
Wall Bracket and the Lower Wall Bracket.
Disassemble and screw in Top Underside Wall Bracket and
Lower Wall Bracket.
3.
4.

13
Reassemble gate panel by connecting the top of the Barrier
Panel to the Top Underside Wall Bracket.
Place the Corner Tube through the Lower Wall Bracket. Then
place the Corner Tube into the Top Underside Wall Bracket. Pull
the Corner Tube up so you can position the bottom of the Corner
Tube into the bottom hole, and then into the Bottom Cap.
5.
6.

14
Place the Lower Wall Bracket over Corner Tube, and put the
Top Cap on the bottom of the Barrier Panel.
Place the Corner Tube into the Barrier Panel and then into the
Top Topside Wall Bracket. Pull the Corner Tube up, while lifting
the bottom into its position.
1.
2.
STEP 3: TOPSIDE BRACKET
WALL ASSEMBLY
INSTALLATION

15
Mark screw hole positions with a pencil for the Top Topside
Wall Bracket and the Lower Wall Bracket.
Disassemble and screw in Top Topside Wall Bracket and then
screw in the Lower Wall Bracket.
3.
4.

16
Place the Corner Tube through the Lower Wall Bracket and
then push the Corner Tube through the top hole.
Put the Top Cap on the bottom of the Barrier Panel, and then
position the Corner Tube in place.
5.
6.

17
Turn base knob to the unlocked position, pull up on the corner
tube and slide the bottom of the Corner Tube out from the
base. With the Corner Tube removed you can lift and remove
the unwanted panel.
1.
LOCKED
UNLOCKED
STEP 4: TO REMOVE
UNWANTED PANELS
INSTALLATION

18
1. Align opposite ends of panels, place the corner tube into the
top hole rst, then pull the corner tube up so you can position
the bottom of the corner tube into the bottom hole.
LOCKED
UNLOCKED
STEP 5:
TO ADD EXTRA PANELS
INSTALLATION

19
INSTALLATION
OPTIONAL
EXTENSION
For larger openings join with the #2747 White Playpen Barrier to
extend the barrier by an additional 6 panels.
Individual panels are also available for order from our website, head
to www.permachildsafety.com/

20
OPERATION
1. Using one hand place thumb on the button and grip gate with
ngers. Slide button and lift gate, then open gate in either
direction, when released gate will swing closed automatically.
Always check gate is properly closed.
HOW TO OPEN
STAY OPEN FEATURE
To engage the Stay Open
feature, the gate needs to be
opened passed 90°. Once gate
is in the Stay Open position the
gate will not swing closed.
To activate Auto-Close feature
again, simply lift up and out of
stay open position.
90°