(admin) access and enables you to change all the settings and set up
the iMETOS (e.g. data transfer interval, SMS warning, etc.). With Key 2
the user is not allowed to change the station parameters, but can access
all the data.
THE iMETOS iSCOUT®: STATION DATA AND SETTINGS
You can browse through all stations by clicking the icon Station List in
top right corner.
Click on the station name to select it.
Access the iMETOS iSCOUT® page, by clicking the Eye icon on the left
side of the bar.
To choose which picture you want to see in full-size, use the date selec-
tion tool at the bottom of the page.
INSECT DETECTION TOOL
Insect detection tool automatically detects and counts all insects
marked with rectangles. Thicker rectangles mark the new insects the
system detected, based on the previous image.
You can edit the drawn rectangles on the image – change size, remove
or add new rectangles.
Select the rectangle and label/mark the insect accordingly.
Remember to save at the end. You can also export the image.
On
STATION SETTINGS
page set up your iMETOS device.
Station settings > Conguration: Ensure that Time zone and location
are properly set (you need to set it up manually, otherwise the station
will not take and send photos at the time in your time zone). Under
Transfer settings, you can dene how your iMETOS device sends data.
Note that the settings for logging interval and transmission times will
work with the default values - rst photo at 7am Austrian time - as long
it is not changed.
Setup how your iMETOS iSCOUT® sends the data. Note that taking and
sending pictures consumes a lot of data and energy, which is why a
limitation of three pictures per day is set.
