Phanteks ENTHOO PRO II User manual

USER MANUAL V1.0
ENTHOO PRO II
SERVER EDITION

Thank you
for choosing

2
26
27
28
29
TABLE OF CONTENTS ENTHOO PRO II SE
Introduction
Specications
Exploded View
Accessories
Congure your Enthoo Pro 2
Getting started
Installing the Motherboard
Installing the Power Supply
Installing a Server Power Supply
Installing Fans
Repositioning fan bracket
Installing Drives
Installing Water Cooling
Installing Drain Port
Installing GPU Support Bracket
Connecting Front I/O
Cable Management
Dust Filters
Optional Upgrades
Installing the 5.25 inch bay
Contact Us
Warranty
3
4
5
6
7
8
10
11
12
14
15
16
19
21
22
23
24
25
1. WHAT’S INSIDE?
2. CHOOSE YOUR SETUP 3. SUPPORT

3
INTRODUCTION ENTHOO PRO II SE
Welcome to Phanteks!
The Enthoo Pro 2 has been designed with extreme performance in mind, featuring
Phanteks’ innovative ‘High-Performance Fabric’ that sets a new airow performance
standard in the PC enclosure industry. With an extremely spacious and versatile
interior design and state-of-the-art features, the Pro 2 is ready to house any high-end
conguration. From SSI-EEB motherboards to extreme water cooling to extensive storage
capabilities, anything is possible. The Pro 2 Server Edition expands support for more PCIe
devices, server grade hardware and direct cooling.
Phanteks believes that meaningful designs are created through
the fusion of form and function.
The Phanteks team

4
SPECIFICATIONS
INCLUDED ACCESSORIES
4x
1x
1x
1x
1x
330 x 345 mm
13.0 in(W) x 13.6 in(L)
195 mm (7.7 in)
503 mm (19.95 in)
[email protected]
[email protected]
5 Years
3.5” Stackable HDD Bracket
Accessory Bag
GPU Anti-Sag Bracket
PSU rubber pad
PSU rubber pad (high)
Max Motherboard size
CPU Cooler Clearance
GPU Clearance
Contact (International)
Contact (America)
Warranty
CLEARANCE
SUPPORT
240 mm x 580 mm x 560 mm
(9.45 x 22.83 x 22.05 in)
Full Tower
Steel chassis, Tempered glass window**
SSI-EEB, ATX, Micro-ATX, Mini-ITX, E-ATX,
XL-AT X
Power button, 4x USB 3.0, Microphone,
Headphone, Reset Button,
USB 3.1 GEN 2 Type-C
11x
10x (4 included)
11x (11 included)
4x 3x
3x 3x
1x -
4x -
3x
Up to 480 Up to 420
Up to 360 Up to 280
120 -
Up to 480 -
Dimension
(WxDxH)
Form Factor
Materials
MB Support
Front I/O
PCI slots
Internal 3.5”
Internal 2.5”
Front
Top
Rear
Right Side
Left Side
Front
Top
Rear
Side
CASE SPECIFICATIONS
PCI SLOTS & DRIVE BAYS
FAN
RADIATOR
120 MM
120 MM
140 MM
140 MM
ENTHOO PRO II SE
** Only PH-ES620PTG model is equipped with a tempered glass sidepanel

5
1. Chassis
2. Front Panel
3. Right Side Panel
4. Left Side Panel*
5. Server PSU Bracket
6. SSD Cover
7. Front Dust Filter
8. Top Dust Filter
9. Side Dust Filter
10. Bottom Dust Filter
11. HDD Bracket
12. SSD Bracket
6
5
12
9
7
4*
10
11
3
1
8
2
EXPLOADED VIEW ENTHOO PRO II SE
4* PH-ES620PC_BK version is not
equipped with a tempered glass panel

6
TOOLBOX PSU RUBBER PAD
GPU SUPPORT BRACKET FAN BRACKET
ACCESSORIES
3.5” MODULAR HDD BRACKET
- 4 included in accessory box
- For 3.5”or 2.5”Drive
Supports up to 4 GPU’s
simultanuously
Supports
3x 120 mm
fans
SERVER PSU BRACKET
- Included in accessory box
- Riser Cable is sold separately
Rubber pad included to protect your server grade PSU from scratches when
installing with the bracket.
ENTHOO PRO II SE
Fan screw
M3x5 mm
Motherboard /
SSD screw
6-32x6 mm
Hex screw
Motherboard Stand-o
+ tool
6-32x6 mm
Thumb screw
6-32x9 mm
HDD screw
8x
38x
10x 16x7x
1x
3x

7
CONFIGURE YOUR ENTHOO PRO II
STORAGE - P16.
WATERCOOLING - P19.
AIR COOLING- P14.
The Enthoo Pro 2 has a versatile chassis design, providing you with a myriad of options. With so many possibilities to pick from, you can use
this overview to choose and plan the best conguration for your build.
ENTHOO PRO II SE

8
PULL CORNER
GETTING STARTED
PREPARATIONS
The Enthoo Pro 2 case is designed to support installation in a standing position.
Don’t turn on the power to your system until installation is complete.
Discharge your body’s static electric charge by touching a grounded surface before performing any hardware procedure.
Make sure to consult the manuals of your hardware before installation.
If you do not feel comfortable with performing the installation
procedure, consult a qualied computer technician.
REMOVING FRONT PANEL
1.
ENTHOO PRO II SE

9
GETTING STARTED ENTHOO PRO II SE
* Only PH-ES620PTG model is equipped
with a Tempered Glass sidepanel
Align the tab in the
slot when re-installing
1
1
1
4
3
2
2
1
2
2. REMOVING LEFT SIDE PANEL*
3. REMOVING RIGHT SIDE PANEL
LOOSEN:
2x
LOOSEN:
2x

10
INSTALLING MOTHERBOARD
Somemotherboardsrequireinstallationor repositioning
of the stand-os. Please consult your motherboard
manual for the correct stando positioning.
ROG Dominus Extreme
C621 AORUS XTREME
STAND-OFF POSITIONING
SUPPORTS
Micro ATX/SSI-EEB/SSI-CEB
Install extra standos
ATX / E-ATX Pre-installed
For repositioning standos
9x
REQUIRES:
Use the motherboard screws from the toolbox to install your motherboard on the
pre-installed stand-os.
These stand-os have a special collar to keep the
motherboard in place when installing vertically.
ENTHOO PRO II SE

11
INSTALLING POWER SUPPLY
REQUIRES:
4x
Install the rubber pad onto the chassis to support the power supply.
Secure the Power Supply with 4x PSU screws.
ENTHOO PRO II SE

12
REQUIRES:
A server-grade power supply can be installed using the included
rear bracket (A) and holding bracket (B).
First, install the rear bracket (A) with 4x PSU screws and place
the power supply in its position.
INSTALLING A SERVER POWER SUPPLY ENTHOO PRO II SE
AB
4x

13
INSTALLING A SERVER POWER SUPPLY
REQUIRES:
Secondly, the server-grade power supply is secured with the holding bracket from the bottom with 2x
PSU screws.
ENTHOO PRO II SE
2x

14
INSTALLING FANS
TOP 140
FAN
120
FAN
Congure your airow-path with this overview. Some fan locations allow you to choose between
storage or cooling to oer more exibility.
The left-side fan bracket is removed by removing the 4x screws and lifting it out the chassis.
140
FAN
120
FAN
FRONT
120
FAN
REAR
ENTHOO PRO II SE
120
FAN
SIDE
120
FAN
SIDE

15
REPOSITIONING FAN BRACKET
The left-side fan bracket can be installed in a secondary position to pull air from the front of the
chassis. Secure the fan bracket with 5x screws as shown.
*This position will block the right side fan and HDD positions.
ENTHOO PRO II SE

16
INSTALLING DRIVES
4x
2.5” SSD INSTALLATION
Three SSDs can be installed on the 3x dedicated SSD bracket and two on each of the 4x SSD
covers for a total of 11 SSD drives.
123
REQUIRES:
Another SSD can be placed without tools on the rear side of
the cover. Press the SSD down on the bottom 2 pins and then
place the SSD in the top 2 pins.
SSD Cover
One SSD can be installed on the front of the cover with 4x
SSD screws:
SSD Bracket
Install the SSD with 4x SSD
screws and place it back on
the 4x grommets. 4x
1
2
ENTHOO PRO II SE

17
1
2
3
4
5
6
7
8
9
10
INSTALLING DRIVES
REQUIRES:
ENTHOO PRO II SE
2x
STACKSTACKSTACKSTACK
A
B
C
D
E
F
G
H
REQUIRES:
Stack 2 HDD brackets before mounting
if you install more than 1x bracket.
MAIN COMPARTMENT
A total of 10 Stackable HDD brackets can be installed on the side fan positions. Before installation
please remove the SSD Covers.
1. Mount the bracket in the
chassis.
2. Secure with 2x thumb screws
in the chassis.
left view right view
SCREW HOLES

18
INSTALLING DRIVES ENTHOO PRO II SE
HDD
REQUIRES:
3.5” HDD INSTALLATION
4x Phanteks Stackable 3.5” HDD Brackets are included.
Additional brackets are sold separately (PH-HDDKT_03).
The HDD bracket can also house
a 2.5”SSD instead of a 3.5”HDD.
HDD INSTALLATION
STACK / INSTALL
REMOVE
2
1
1. LIFT UP LATCH
2. PULL OUT
2
1
BOTTOM COMPARTMENT
2x HDD Brackets can be positioned in the bottom compartment.
4x