PHAT G3 User manual

OWNER’S MANUAL

2
Thank you for selecting the original PHAT®Scooters
Electric Scooter.
PHAT®Scooters focuses on the research and development of electric play
vehicles for efficient and fun transportation. Our designs intentionally create a
culture built on quality, creativity, fun and individuality.
Before you drive your PHAT®Scooters Electric Scooter, please carefully
read the specifications in this operating manual and conduct a complete
inspection of the scooter.
Refer back to this operating manual often for instructions on properly
Maintaining your PHAT®Scooters Electric Scooter. The sections in this manual
on maintenance and the proper operation of your scooter will help you
become familiar with the scooter’s function and controls. Any improper
operation may damage your scooter, increase significant risk in bodily harm
and void the warranty.
The actual scooter may be different from the specifications due to continuous
improvements and updates in product technology. Please carefully read and
observe the contents within this operating manual to ensure your safety and
proper scooter maintenance.
Thank you again for joining the PHAT®Scooter family!
PREFACE

3
WWW.PHATSCOOTERS.COM
1. Before riding your scooter, please carefully read this operating manual
and thoroughly inspect the scooter to ensure your safety. If any issues
are found, please contact the manufacturer immediately at
[e-mail].
2. Comply with all traffic laws and exercise caution when operating your
scooter on or near busy streets or crowded areas. Allow sufficient
braking distance when stopping the scooter.
3. Exercise caution and reduce your speed when operating the scooter
in poor weather conditions such as in rain or snow. Operating in light
rain or snow may not necessarily damage the scooter but be careful not
to submerge the scooter. If the rear wheel motor hub is submerged in
water, the scooter may short circuit and cause permanent damage to
the electrical equipment. Do not exceed the carrying capacity of your
scooter, which is rated at 440lbs.
4. Do not disassemble the battery and motor. All replacement parts must
be purchased from PHAT®Scooters.
5. For the safety of others, your scooter should only be operated by those
who have thoroughly read and understand this operating manual prior
to operating the scooter.
6. Should your scooter go several weeks without use, simply charge the
battery back to full before use and then continue charging as normal.
See maintenance and storage sections for more detailed instructions.
NOTES

4
TABLE OF CONTENTS
2 - Preface
3 - Notes
5 - PHAT®Scooter Components
8 - Main Technical Parameters
9 - Features Overview
10 - Cleaning
11 - Battery Handling Protocol
13 - Battery Charging Protocol
14 - How to Charge Battery
15
16 - Safe Ride Guide & Checklist
17 - Scooter Features Guide
19 - Battery Tray
20 - Manufacturers Warranty
21 - Scooter Storage
22 - Maintenance
24 - Terms and Conditions
27 - Troubleshooting
29 - Return Policy
- Battery Operation, Maintenance & Storage

5
WWW.PHATSCOOTERS.COM
COMPONENTS
LCD DISPLAY WITH KEY-LESS PUSH BUTTON START & ALARM
1
2
3
4
5
6
7
8
PUSH BUTTON START
ODOMETER
BATTERY INDICATOR
METER
DRIVE MODE INDICATOR
ERROR CODES
SPEEDOMETER
GEAR INDICATORS
5
67
8
1
2
3
4
24 - Terms and Conditions
27 - Troubleshooting
29 - Return Policy

6
COMPONENTS (cont’d)
1 - SAFETY THROTTLE
2 - PHONE HOLDER
3 - LCD DISPLAY WITH KEY-LESS PUSH BUTTON START & ALARM
4 - UV AND WATER RESISTANT SINTEX SEAT
5 - DRINK HOLDER
6 - SUPER BRIGHT HEADLIGHT FOCUSED ON THE ROAD
7 - MAGNETIC DECKS THAT ARE INTERCHANGEABLE
8 - UPGRADED SUSPENSION
9 - 3000 WATT MOTOR FOR BETTER HILL CLIMB
10 - REMOVABLE QUICK-CHARGE BATTERY
11 - MIRRORS

7
WWW.PHATSCOOTERS.COM
COMPONENTS (cont’d)
1
2
11
34
5
6
7
8
9
10

8
Front Brake Hydraulic disc brake+EABS
Rear Brake Hydraulic disc brake+EABS
Front /Rear Tire 18 × 10” - 225/45 -35N Tire
Motor 3000 Watt
Front Fender ABS
Frame Steel
Wheelbase 53 inches
Seat Height 32 inches
Battery 72v 23AH: Lithium Ion
Charging Time 3 Hours
Range Per Charge** 25 miles - 30 miles
Maximum Speed* 20 mph
Torque 95 N/M
Hill Climb* 20°
Weight 194 lbs - W/ Golf Carrier 222lbs
L*W*H 71” x 17” x 49”
*Speed, Range, and Hill Climb will vary depending on rider weight.
**Range decreases with more speed, torque and electrical upgrade usage.
MAIN TECHNICAL PARAMETERS

9
WWW.PHATSCOOTERS.COM
FEATURES OVERVIEW
PHAT®Scooters use an ultra-thin lithium NMC battery and a simple scooter
structure with a 8-10 inch-wide wheel.
Battery: The lithium NMC battery is small, light-weight, and safe.
It provides a minimized carbon footprint along with a long
service life.
Motor: The professional-grade, brush less motor is composed of
the best magnet steel material, high-quality coiled silicon steel
sheet, precision bearings, and a thick motor shaft. It is strong
and durable in terms of power and bearing capacity.
Tire: This super wide, straight-line vacuum tire provides better
stability and a strong grip, giving you peace of mind and ensuring
a ride that is safe, comfortable and flexible.
Frame: The integrated steel frame is solid, strong and durable.
Headlight: The Angel Eye daytime running headlight and LED
front headlight provide a safe day and night travel experience.
Dashboard: The dashboard features a 4-grid indicator for the
battery level and 3-gear indicators for speed. Beach Mode is 8 mph
and is ideal for the boardwalk. Golf mode is 13 mph and is for use
on the golf course. Bike mode is 19.8 mph and is for use in the bike
lane. Please refer to your state and local laws to make sure you are
in compliance with riding.
Diagrams that display these components are shown on pages 5-7.

10
CLEANING
PHAT® Scooters recommends cleaning your scooter regularly to ensure
proper functionality.
1. Prior to cleaning, turn the scooter off and remove the key.
2. Dust all exposed parts, using a soft, smooth and dry cloth.
3. Clean your PHAT®Scooters using tap water and a neutral
detergent. Wipe clean with a soft, damp cloth to remove dirt
and grime.
4. Avoid dry wiping as it can cause scuffing.
5. Wipe down the scooter seat with soft disinfectant wipes.
6. Avoid getting electrical components wet. Gently dust instead.
7. Do not clean the headlight, battery, or other electrical parts
directly with water or they will become damaged.
8. If heavy build up occurs under the fenders, lightly spray with
water, but avoid spraying directly into the rear wheel hub.
9. Do not use wax, oil or harsh cleansers.
10. When done, wipe the scooter gently until it’s dry.
11. Drape a scooter cover over your scooter to protect against
dust build-up. You can purchase a scooter cover at
www.phatscooters.com.

11
WWW.PHATSCOOTERS.COM
BATTERY HANDLING PROTOCOL
Please refer to the guidelines below for proper handling of the battery to
prevent possible damage to the battery or vehicle:
WARNING: Tampering with the battery will void the warranty and can
result in leakage, overheating, smoking, fire or explosion.
• Operating temperatures should be within a range of -10 degrees to 45
degrees Celsius (14 to 113 degrees Fahrenheit).
• Do not expose the scooter battery or any related parts to liquids or
corrosive agents.
• Keep away from heat sources, combustible liquids, gases and
explosives.
• Never insert anything into the terminals, especially metal objects.
• Always be mindful of correct terminal orientation to prevent reverse
polarity.
WARNING: In case of any odors, overheating, or deformation of the
battery keep away from the battery and call PHAT customer service 866-
972-6687.

12
Short circuit event
The new and improved 23AH battery has internal protections to keep
riders safe. Our upgraded battery management system allows for
improved function, monitoring, and safety.
In the event that your battery should malfunction, it likely means the
internal protections have been activated. Please refer to the following to
troubleshoot the short circuit event:
• Relieve the short circuit and allow 5 minutes for the battery to reset.
• Battery should return to normal operation after reset.
• If the battery does not reset and return to normal operations, please
contact PHAT®customer service.
BATTERY HANDLING PROTOCOL (cont’d)

13
WWW.PHATSCOOTERS.COM
WARNING:Tampering with the charger will void the warranty and can
result in overheating, smoking, fire or explosion.
*******Failure to comply with this manual will void warranty.*******
In order to prevent damage to yourself or to your vehicle, please follow
these safety precautions:
• Make sure to use the charger on a level dry surface away from children.
• Only use the charger that was included with the scooter at the time of
original purchase.
• Do not leave the charger plugged to an outlet unless it is actively
charging a scooter.
• Do not leave the charger unattended.
• Once the charger indicates full charge unplug it in a timely manner.
• Do not charge the scooter in a closed space or in extreme temperatures
(less than -10 degrees or above 45 degrees Celsius).
WARNING: If you detect any problems, including but not limited to
abnormal signal light behavior, odors and/or overheating, please stop
charging immediately and call PHAT customer service.
BATTERY CHARGING PROTOCOL

14
HOW TO CHARGE BATTERY:
Step 1: Plug the charger into a properly wired 120VAC outlet with a
minimum __ampere rating. A green LED light will display on the charger,
which means the battery is ready to be charged.
Step 2: Plug the charger into the charge port in the breastplate of the
scooter. Please be mindful of orientation.
Step 3: Once the charger is properly inserted into the charge port, the
LED light should turn from green to red. This indicates that the scooter is
charging.
NOTE: Charging is complete once the light on the charger turns from red
to green.
NOTE: If two 9amp chargers are plugged into the wall at the same time,
the breaker will pop.

15
WWW.PHATSCOOTERS.COM
Please refer to the following for appropriate and inappropriate
battery operation and expectations:
• If the battery cannot be fully charged in 12 hours, please
contact customer service.
• To maximize battery life, keep the battery between 20-80%
capacity.
NOTE: Lower temperature conditions will result in reduced battery
capacity
Optimal storing condition:
• If storing the unit for longer than one week, remove the battery
from the scooter.
• Store the battery in a room temperature, non-humid, level area.
For best performance, store the battery at 50% capacity.
NOTE: Storing the battery at less than 30% or greater than 70%
capacity can cause permanent damage to the battery that
reduces lifetime and total capacity.
BATTERY OPERATION AND MAINTENANCE
BATTERY STORAGE

16
We want you to stay safe when riding your PHAT G3 scooter! Please
perform the following preliminary safety checks before operating
your scooter:
• Steering – Inspect turns, looking for a good strong connection:
tire turns as expected, no displacement or loosening.
• Braking – Inspect levers. Confirm acceleration and confirm that
braking is working as intended.
• Tires – Inspect tires for deformities. Check tire pressure, check
tire tread, ensure there are no visual deformities.
• Lights – Inspect all lights for function: high beam, low beam,
brake light, turn signal indicators, etc.
• Horn – Inspect for responsiveness.
1. Always wear a helmet.
2. Obey all laws.
3. Pay attention to surroundings.
4. Do not operate a scooter while impaired.
SAFE RIDE CHECKLIST
SAFE RIDE GUIDE

17
WWW.PHATSCOOTERS.COM
SCOOTER FEATURES GUIDE
Getting Started
LOCK:
When the scooter is OFF, press the Lock button on the key fob to arm the alarm
and lock the scooter.
UNLOCK:
When the scooter is OFF, press the Lock button on the key fob. This will activate the
scooter for 15 seconds, during which time the scooter can be freely rolled and the
push-to-start button becomes operable.
DISABLE ALARM:
To disable the alarm, press the lock button on the key fob.
START:
In order to initiate start-up, the scooter must be unlocked using the key fob.
Once the scooter is unlocked, use the push-to-start button on the scooter or the
Remote Start button on the key fob to turn the scooter ON.
Press the button again to turn the scooter OFF.
ACCELERATE:
Once the scooter is ON, twist the throttle towards the user to cause the bike to
accelerate.
CHANGE GEARS:
Push the top button to toggle through the gear selections. 1->2->3->1 and so on.

18
SCOOTER FEATURES GUIDE (cont’d)
REVERSE:
Push the bottom button to toggle to the Reverse setting. To return to Forward
drive, push the button again.
HEADLIGHTS:
The default setting for the headlights is a low beam that stays on while the scooter
is in use.
To turn on the high beam - push the button on the handlebars. There is an
indicator on the dash screen to alert the user the function is operating.
To turn the high beam off - push the button again. Headlights will return to the low
beam setting.
TURN SIGNAL:
Push the button on the handlebars marked “LEFT” to activate the turn signal when
making a left turn. Conversely, push the button on the handlebars marked “RIGHT”
to activate the turn signal when making a right turn. There is an indicator on the
dash to alert the user the function is operating.
When the turn is completed, push the button again to deactivate the signal.
HORN:
Push the button to operate the horn.
PARK:
Step 1: Turn the scooter OFF.
Step 2: Step off the scooter.
Step 3: Leave the scooter on flat stable ground to engage the kickstand.

19
WWW.PHATSCOOTERS.COM
BATTERY TRAY
OPEN BATTERY TRAY:
Step 1: Remove the security screw.
Step 2: Remove the locking handle.
Step 3: Pull the handle towards you.
Step 4: Battery tray will drop down.
Step 5: Fold out the trap door.
CLOSE BATTERY TRAY:
Step 1: Place the battery inside and ensure proper connections. Make sure all the
wires are safely installed and out of the way.
Step 2: Close the trap door.
Step 3: Push the battery tray up into the deck of the scooter. You should feel a click
of the locking mechanism.
Step 4: Reinstall the locking handle.
Step 5: Reinstall the security screw.

20
The warranty begins on the first day you, as the purchaser, take possession
or register your Scooter (whichever is earlier). To activate your warranty you
must register your scooter at http://registration.phatscooters.com. Failure
to register your scooter disqualifies the product from receiving warranty
coverage.
Regular maintenance is not included with your Phat Scooters®purchase.
These expenses are the customer’s responsibility. This includes tires, unless
a defect exists.
During these warranty periods, your exclusive remedy and Seller’s
sole obligation will be that Seller will replace such defective parts.
Phat Scooters®does not make repairs or installations of replacement
components. For repairs, tune ups, and adjustments, please visit your local
bike or repair shop.
MANUFACTURER’S WARRANTY
Scooter Battery Frame & Motor
G3 1 Year 3 Years
PHAT®Scooters warranty covers battery and parts (no accessories) against
defects in material and workmanship under ordinary consumer use for a
period of: