Philips Selecon RAMA LED Luminaires Instruction Manual

RAMA LED LUMINAIRE
INSTALLATION & USER’S MANUAL

©2014 Philips Group. All rights reserved.
Document Number: RAMA LED Luminaires User’s Manual
Version as of: 24-004-3684-00 18th, Aug 2014
RAMA LED Luminaire Installation & User’s Manual
Philips Selecon Offices
Philips Selecon - Dallas
Philips Selecon - Asia Limited
Website:
www.seleconlight.com
Philips Selecon - Auckland
Philips Selecon - Europe
10911 Petal street
Dallas, TX 75238
U.S.A Tel: [phone]
Fax: [phone]
19-21 Kawana Street
Northcote, Auckland 0627
New Zealand
Tel: [phone]
Fax: [phone]
Marssteden 152
Enschede 7547 TD
The Netherlands
Tel: [phone]
Fax: [phone]
Unit C, 14/F., Roxy Industrial Centre 41-49
Kwai cheong Road Kwai Chung, N.T., Hong Kong
Tel: [phone]
Fax: [phone]
The material in this manual is for information purposes only and is subject to change without notice. Philips
Selecon assumes no responsibility for any errors or omissions which may appear in this manual. For comments
and suggestions regarding corrections and/or updates to this manual, please contact your nearest Philips Selecon office.
Note: Information contained in this document may not be duplicated in full or in part by any person without prior written
approval of Philips Selecon. Its sole purpose is to provide the user with conceptual information on the equipment
mentioned. The use of this document for all other purposes is specifically prohibited.

1
RAMA LED Luminaires Installation & User’s Manual
IMPORTANT INFORMATION
Warnings and Notices
Additional Resources for DMX512
For more information on installing DMX512 control systems, the following publication is available for purchase
from the United States Institute for Theatre Technology (USITT), "Recommended Practice for DMX512: A Guide
for Users and Installers, 2nd edition" (ISBN: 9780955703522). USITT Contact Information:
USITT
315 South Crouse Avenue, Suite 200
Syracuse, NY 13210-1844
Phone: [phone] or 1.315.463.6463
www.usitt.org
Philips Selecon Three Year Warranty
Philips Selecon offers a three year limited warranty of its luminaires against in materials or workmanship from the defects
date of delivery. A copy of Philips Selecon three year limited warranty containing specific terms and conditions can be
obtained by contacting your local Philips Selecon office.
When using electrical equipment, basic safety precautions should always be followed including the following:
a.READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
b.Do not use outdoors.
c.Do not mount near gas or electric heaters.
d.Equipment should be mounted in locations and at heights where it will not readily be subjected to
tampering by unauthorized personnel.
e.The use of accessory equipment not recommend ed by the manufacturer may cause an unsafe
condition.
f.Do not use this equipment for other than intended use.
g.Refer service to qualified personnel.
SAVE THESE INSTRUCTIONS.
WARNING : You must have access to a main circuit breaker or other power disconnect device
before installing any wiring. Be sure that power is disconnected by removing fuses or turning the
main circuit breaker off before installation. Installing the device with power on may expose you to
dangerous voltages and damage the device. A qualified electrician must perform this installation.
WARNING : Refer to National Electrical Codes and local codes for cable specifications. Failure to
use proper cable can result in damage to equipment or danger to personnel.
WARNING : This equipment is intended for installation in accordance with the National Electric
Code?and local regulations. It is also intended for installation in indoor applications only. Before
any electrical work is performed, disconnect power at the circuit breaker or remove the fuse to avoid
shock or damage to the control. It is recommended that a qualified electrician perform this
installation.

Installation & User’s Manual
2TABLE OF CONTENTS
TABLE OF CONTENTS
IMPORTANT INFORMATION
TABLE OF CONTENTS
PREFACE
RAMA LED LUMINAIRE OVERVIEW
INSTALLATION AND SET UP
OPERATION AND PROGRAMMING
DMX CONTROL
CLEANING AND CARE
TECHNICAL SPECIFICATIONS
RAMA LED Luminaire Dimensions 16
................................................................................................................
Philips Selecon Offices ............................................................................................................................. 0
Warnings and Notices ............................................................................................................................. 1
Additional Resources for DMX512 ........................................................................................................... 1
Philips Selecon Limited Three Year Warranty ............................................................................................. 1
About this Manual ........................................................................................................................................ 3
Included Items ..............................................................................................................................................3
RAMA LED Luminaire Components ........................................................................................................ 4
Major Luminaire Components .................................................................................................................. 4
LCD Display / Menu System................................................................................................................... 5
Power Requirements...................................................................................................................................... 6
AC Power Operation............................................................................................................................... 6
Connecting Power ......................................................................................................................................... 6
Connecting to the DMX512 Network................................................................................................................ 6
Rigging Luminaire ...................................................................................................................................... 7
Menu System............................................................................................................................................... 8
LCD Display and Menu System Operation ....................................................................................................... 8
Dimming Curve Selection.............................................................................................................................. 9
8 Bit Mode ................................................................................................................................................ 10
16 Bit Mode ................................................................................................................................................ 10
RAMA LED Luminaire RDM Parameter IDs .................................................................................................... 11
Special Cleaning and Care Instructions ............................................................................................................. 15
Front Lens Cleaning ..................................................................................................................................... 15
Service and Maintenance
............................................................................................................................... 15
RAMA LED Luminaire Operational Specifications ............................................................................................. 16
RAMA LED Luminaires

About this Manual 3
RAMA LED Luminaires Installation & User’s Manual
PREFACE
1.About this Manual
The document provides installation and operation instructions for the following products:
RAMA L ED Luminaire 3100K
RAMA L ED Luminaire 5600K
Please read all instructions before installing or using this product. Retain this manual for future reference. Additional
product information and descriptions may be found in the product specification sheet.
Note: The RAMA LED Luminaire is universal voltage 100 to 240 VAC (auto-ranging).
2.Included Items
Each RAMA LED Luminaire includes the following items:
RAMA L ED Luminaire
Installation and User’s Manual ( t his document)
Colourframe Accessory
M12 yoke nut and bolt

4RAMA LED LUMINAIRE OVERVIEW
RAMA LED LUMINAIRE OVERVIEW
1. RAMA LED L u minaire Components
Major Luminaire Components
Figure 1: RAMA LED Luminaire Components
Figure 2: RAMA LED Luminaire Components - Rear View
Front of Unit
Rear of Unit
DMX512A
(RDM) Input
DMX512A
(RDM) Output
Installation & User’s Manual RAMA LED Luminaires
1
2
3
6
4
5
1) Accessory slot cover
2) Yoke
3) LCD Display Menu System (see “LCD Display / Menu System”on Page 5 for more information)
4) Safety Cable Locking Knob
5)Tilt lock-off knob
6) Zooming Knob
Function Buttons
Cooling Fan
LCD Display
AC Power Input

DMX IN DMX OUT
RAMA LED
5600K, 95 CRI
120W Max.
O
Tc: 60 C
100-240V~ 50/60Hz
1.0A@115V / 0.5A@240V
O
Ta: 40 C
IP20
NOT FOR RESIDENTIAL USE DRY LOCATIONS ONLY!
NO-USER SERVICEABLE PARTS
ASSEMBLED IN CHINA www.seleconlight.com
Z899
0.3m
ESC OK
UP
DOWN
RAMA LED Luminaire Components 5
LCD Display / Menu System
Figure 3: LCD Display & Menu System
Note: For Menu operation and programming details, refer to "LCD Display and Menu System" on page 8.
RAMA LED Luminaires Installation & User’s Manual
1
2
3
4
5
1) LCD Display(Menu System)
2) DOWN Button
3) ESC Button
4) UP Button
5) OK Button

6INSTALLATION AND SET UP
INSTALLATION AND SET UP
1.Power Requirements
The RAMA LED Luminaire operates on AC input voltages from 100 to 240 VAC.
WARNING! This luminaire does not contain an ON/OFF switch. Always disconnect power input cable to completely
remove power from luminaire when not in use.
AC Power Operation
When connected to an AC source, the luminaire operates on 100 to 240 volts AC (+/- 10%, auto-ranging). The luminaire
contains an auto-ranging power supply. Each luminaire can draw up to 120 Watts.
2.Connecting Power
Luminaires can be powered in the following way:
Direct connection to a AC power sour c e using an AC input cable.
Table 1: RAMA LED Luminaire Voltage (VAC) vs. Current*
Voltage (AC)Total Current (A)Voltage (AC)Total Current (A)
Installation & User’s Manual RAMA LED Luminaires
100 1.20 180 0.67
110 1.09 190 0.63
160 0.75 240 0.50
150 0.80 230 0.52
140 0.85 220 0.54
130 0.92 210 0.57
120 1.00 200 0.60
170 0.70
CAUTION: In the event the AC input cable of this luminaire is damaged, it must be replaced, by a suitably qualified
technician, with an approved cable through an Authorized Philips Selecon Dealer or Service Center.
3.Connecting to the DMX512 Network
Basic DMX512 installation consists of connecting multiple RAMA LED Luminaires together (up to 32 luminaires)
in "daisy-chain" fashion. A cable runs from the control console (or DMX512 control source) to the DMX connector
on the first RAMA LED Luminaire. Another cable runs from the other DMX connector on the first unit to a DMX
connector on the next RAMA LED Luminaire (or DMX512 device to be controlled).
DMX I N DMX O UT
RAMA LED
5600K, 95 CRI
120W Max.
O
Tc: 60 C
100-240V~ 50/60Hz
1.0A@115V / 0.5A@240V
O
Ta: 40 C
IP20
NOT FOR RESIDENTIAL USE DRY LOCATIONS ONLY!
NO-USER SERVICEABLE PARTS
ASSEMBLED IN CHINA www.seleconlight.com
Z899
0.3m
ESC OK
UP
DOW N
Figure 4: RAMA LED Luminaire DMX512 Input / Output Connections
Rear of Unit
DMX512A
(RDM) Input
DMX512A
(RDM) Output

Note: For more information on DMX512 networking and systems, refer to "Additional Resources for DMX512" on
page 1. For RAMA LED Luminaire DMX Mapping, refer to "DMX CONTROL" on page 15.
Figure 5: RAMA LED Luminaire - DMX512 Connections
4. Rigging Luminaire
The RAMA LED Luminaire is provided with an adjustable yoke assembly to assist in balancing.
The yoke is easily attached and detached from the luminaire as required. These yokes are designed to accept a
variety of mounting hooks, clamps, etc. for hanging applications. Refer to Figure 6 for additional information.
.
Simply attach hook, clamp, etc. to the RAMA LED Luminaire yoke assembly in the M13 hole.
Note: Mounting hooks, clamps, etc. are sold separately or by others. For available mounting accessories refer to
"Accessories" on page 3.
Figure 6: Rigging Luminaire - Hanging Applications
DMX512
DMX512 (out from first
to second luminaire)
DMX512 (out to the next
luminaire or DMX512
controlled device)
RAMA LED Luminaires
DMX512 Connections
Note: Remaining pins on each connector are not used.
DMX512 Signal XLR Pin
Common (Drain) 1
DMX512 - 2
DMX512 + 3
(from console or
control device)
Note, the bottom of the luminaire must be free and clear of any objects (i.e.,scenery) to allow for proper airflow
Rigging Luminaire 7
RAMA LED Luminaires Installation & User’s Manual
Hooks / Clamps
(sold separately)
Mount
The mounting hole in the yoke will fit an M12 bolt(supplied)
Note:
A safety cable MUST always be used when rigging luminaires on
bars, ladders etc. The RAMA LED has an integral safety cable
that can be retracted into the luminairewhen not in use.

OPERATION AND PROGRAMMING
1. Menu System
2. LCD Display and Menu System Operation
The LCD Display Menu system consists of several categories. Use the Menu Buttons to access and make changes to
the menu items. When the desired menu item is reached, press the desired Menu Button to display the menu options
and to navigate and configure the menu options as required.
To navigate and access menu settings/selections:
Step 1.Make sure the luminaire is powered and turned on.
Step 2.Press the desired button t o access menu categories.
Step 3.Use UP | DOWN arrow buttons to n a vigate through the various options and settings.
Step 4.Make changes as desired.
Step 5.Press CHECK MARK (OK) button to accept changes.
Manual Dimming
DMX Address
DMX Personality
Dimmer Curve
DMX Fail
Fan Control
Default Setting
Temperature
FirmwareVersion
RDM UID
DMX 8 bit
Manual
DMX 16 bit
OFF
Manual
Last Hold
Linear Curve
Silent
Sqaure Curve
Brightness
S- Curve
Auto
PL- Curve
FAN ON
Installation & User’s Manual
8Menu System
RAMA LED Luminaires