Attach SimplyGo on the cart…
and on you go!
SimplyGo - Getting started Simply before you go SimplyGo battery specifications
Inform your physician about your trip; your prescription may need to be
adapted depending on climate or altitude of your destination.
When booking your trip, inform the transportation company that you
intend to use your SimplyGo during the journey.
Learn about the carrier’s specific policy or requirements regarding
oxygen therapy patients.
Make sure you have all the SimplyGo accessories you need.
Contact your homecare provider if necessary.
Make sure you carry a copy of your oxygen therapy prescription with
you at all times. Make sure you have the name and contact information
of your homecare provider. Copy these onto your SimplyGo Quick
start guide.
Verify that your SimplyGo batteries are fully charged and that you have
your oxygen cannula with you.
Verify that you have the necessary power supplies to recharge
SimplyGo batteries.
Keep your SimplyGo Quick start guide and your SimplyGo user manual
together with your device at all times.
On/off button
Alarm silence
Mode selection
Increase/decrease the flow rate
Cannula connector
Select the mode you’ve been prescribed
Pulse mode SimplyGo detects each breath intake and delivers the oxygen
delivery accordingly.
Continuous-flow mode Continuous oxygen delivery from 0.5 to 2 LPM.
Sleep mode Pulse mode with an increased detection sensitivity to sense
breath intake more accurately at night. SimplyGo automatically switches to the
last continuous flow setting used if no breath is detected after a period of time.
Charge the battery
or use the charger.
Insert SimplyGo into its
carrying case.
Insert the charged
battery.
Connect a standard
single lumen nasal
cannula. Make sure it is not
pinched or kinked.
Maximum length up to 9 m (30 ft).
Turn on/off SimplyGo
by pressing the power
button twice.
Select the ode by
pressing the mode (M)
button. Continue pressing
the Mode button to scroll
through the Pulse, Continuous
flow, or Sleep modes.
Set the flow rate in
accordance with your
oxygen prescription using the
plus (+) or minus (-) buttons.
Make sure you have all
the accessories you
need. Install SimplyGo on
the cart.
Position the nasal
cannula on your face
and breathe normally through
the nose.
SimplyGo is your ideal travel companion. Discover some useful tips
when traveling with a portable oxygen concentrator.
At departure
Battery autono y
Pulse mode setting* 1 2 3 4 5 6
3 h 42 3 h 30 3 h 06 2 h 42 2 h 18 1 h 54
7 h 24 7 h 00 6 h 12 5 h 24 4 h 24 3 h 18
11 h 06 10 h 30 9 h 18 8 h 06 6 h 54 5 h 42
14 h 48 14 h 00 12 h 24 10 h 48 9 h 12 7 h 36
Continuous flow setting 0.5 12
3 h 06 2 h 18 0 h 42
6 h 12 4 h 36 1 h 24
9 h 18 6 h 54 2 h 06
12 h 24 9 h 12 2 h 48
Charging time 2-3 hours per battery when fully discharged
*Based on 20 breaths per minute
Operating SimplyGo
1
4
78
9
56
2 3