3. Getting started
Insert the SIM card
To user your phone, you must insert a valid SIM card supplied by your GSM operator or
retailer.The SIM card contains your subscription, your mobile number, and memory in which
you can store phone numbers and messages.
Insert the SIM card
1. With the back of the phone facing you, push the release button and remove the battery
cover and remove the battery.
2. Insert the SIM card: slide the SIM card it into the card slot carefully. Make sure that the
clipped corner is in the correct corner and the metal contacts are facing down.
3. Slide the battery into its slots, metallic connectors downwards, until it stops. Then lock it by
pushing it downwards.
4. Replace the back cover of your phone: slide it upwards until it locks into its place.
Charge the battery
Your phone is powered by a rechargeable battery. A new battery is partially chaged and an
alarm will warn you when the battery is low.
1. Once the battery and battery cover are clipped on the phone, plug the connector of the
charger (supplied with the phone) into the socket at the the base of the phone, then plug
the charger into a main AC power socket.
2. When charging, a charging animation will be displayed on the main dislay as well as the
sub display. When the charge is completed, an alert sound will be heard with the LED
indicator changed from red to green.
3. When the battery is fully chaged, disconnect the charger.
Note: you can also charge the battery when the phone is switched on.
Switch on the phone
1. Long press [On/Off] key to switch on the phone. The prompt message “Please insert SIM
card” means the SIM card has not been inserted correctly. Please check whether the SIM
card has been inserted correctly and is valid.
2. You will be required to enter the PIN code (i.e. the 4 to8-digit secret code of your SIM card)
if it is set. PIN code is preconfigured and communicated to you by your ooperator or
retailer. To personalize the PIN code, please refer to Settings>Phone settings>Security.
