Philips Xenium User manual

Memory jogger card
To make a call: enter the number on the keypad, then press
or press the Pilot Key and select the Call option.
To answer a call: press or press the Pilot Key and select
the Accept call option.
To end a call: press or press the Pilot Key and select the
End call option.
To use the Names list: press the Pilot Key from the idle
screen and select the NAMES icon.
You can scroll through the list of recorded names. To dial, select a
name and press .
In idle screen, move the Pilot Key down once to reach the Names
list.
Memory jogger card
To enter a name: select <NEW> from the Names list.
To access the carousel: simply press the Pilot Key. To select
a function, move the Pilot Key upwards or downwards. Then
confirm by pressing it. This gives access to the sub menu of the
selected function. Continue in the same way (select by moving the
Pilot Key, confirm by pressing it) until you reach the function you
desire.
To return to the previous menu: press and hold the Pilot
Key. You can also return to the previous display by pressing the
key.
To return to the idle screen: press and hold .
Messages Send SMS
Mailboxes
Read SMS
Settings
Accessories
Security
Main
Menu
PHILIPS
* Subscription dependent.
Broadcast SMS
Display
Time and Date
Language
Hotkeys
Call settings
Names
Call list
Extras
Access settings
Settings
Help
OK
OK
OK
Sounds
SMS settings
Oper. services*
Voice command
Organiser
Launch
OK
Network
WAP
Service numbers
Quick settings
Services
Last page
Favourites

2
22
2
Overview of menus
Names
Messages
Send SMS
Read SMS
SMS settings
SMS centre
Signature
Validity period*
Reply path*
Delivery report*
Auto save SMS
Broadcast SMS
Mailboxes
Call list
Organiser
Events
Day view
Week view
Month view
Extras
Call counters
Accumulated call timers
Accumulated cost
Info at call end
Last call information
-> Euro
<- Euro
Brick Game
Calculator
Alarm clock
Voice memo
Settings
Sounds
Ringer volume
Ringer
Key tones
Minute beep
Organiser alerts
Battery low alert
New SMS tone
Vibrator
Display
Zoom
Backlight
Animation
Contrast
Security
Keypad lock
Public names*
Call barring
Change codes
PIN protection
Time and date
Clock display
Set date
Set time
Language
Accessories
Car melodies
Speakers
Car kit command
Auto switch off
Auto answer
Hotkeys
Voice command
Network
Register again
Preferred list
Call settings
Call forward
Autoredial
Any key answer
Call waiting
Caller ID
Quick settings
Personal
Silence
Autonomy
Headset
Car
Outdoors
Meeting
Operator Services
Services
Service numbers
WAP
Launch
Favourites
Last page
Settings
Access settings
Help
Visit our site and register on line @ http://www.pcc.philips.com

Table of contents 1
Table of contents
Table of contents 1
Before first use 3
Your very first call 3
Using the carousel 5
Example 5
To adjust the contrast 5
Activate/deactivate 6
Using the Names and other lists 6
Glossary 7
Your phone 8
Description of the phone 8
Screen 9
Initial start up
procedure 10
The micro-SIM card 10
Inserting your subscriber card (micro
SIM card) 10
Your PIN code and PUK code 10
Your PIN2 code and PUK2 code 10
The battery 11
Clipping on the battery 11
Removing the battery 11
Charging the battery 12
Making an emergency call 13
Using your phone 14
Switching on 14
Idle screen 14
How to enter a text or a number 14
Events in idle screen 15
Making a call 15
Answering and ending a call 15
Redial and reply 16
Voice dial 17
Flash dial 17
During a call… 17
Adjusting the earpiece volume 18
Mute the microphone 18
Unmute the microphone 18
Writing in the notepad 18
Consulting the Names list 19
Locking the keypad 19
Unlocking the keypad 19
Activate/deactivate the silent mode 20
Activate/deactivate the vibrator 20
Reading your GSM phone number 20
Text Input 21
T9™ Text Input 21
How to use T9™ Text Input 21
Basic text input 22
Using the menus 23
Overview of menus 23
Names 25
<New> 25
Select a name 25
Emergency 26
Own number 26
Messages 26
Send SMS 26
Read SMS 28
SMS settings 29
Broadcast SMS 30
Mailboxes 30
Call list 31

Table of contents
2
Organiser 31
Events 31
Day view, Week view
and Month view 32
Extras 33
Call counters 33
-> Euro 34
<- Euro 34
Brick Game 34
Calculator 35
Alarm clock 35
Voice memo 35
Settings 36
Sounds 36
Display 38
Security 39
Time and date 41
Language 41
Accessories 42
Hotkeys 42
Voice command 44
Network 44
Call settings 44
Quick settings 46
Accessories settings 47
Operator Services 48
WAP 48
Launch the Browser 48
Favourites 49
Last page 50
Settings 50
Images 50
Status icons 50
Access settings 50
Phone Number 50
Login 51
Password 51
Gateway 51
Home page 51
Use of network
services 52
Additional GSM network services
(GSM strings) 52
Query a voice server, a voice mailbox,
a messaging service, etc.
(DTMF tones) 52
Making a second call 53
Answering a second call 54
Answering a third call
(Subscription dependent) 54
Conference Call
(Subscription dependent) 55
Explicit Call Transfer
(Subscription dependent) 55
In-call symbols 55
Precautions 56
Troubleshooting 60
Philips Authentic
Accessories 62
Index 65
Declaration of
conformity 69

Before first use
3
Before first use
Read the safety instructions in the Precautions
section before use.
Your ver y fir st call
Turn the phone face down
1 Insert the micro-SIM card.
Remove the micro-SIM card from the Sim card holder.
Push the metal retaining clip to the right and lift the card holder. Slide in the SIM card
between the retaining clip and the plastic tongue with the cut corner of the card as
shown on the drawing. Close the cardholder and push the retaining clip to the left.
2 Insert the battery
For optimum performance follow the instructions on page 12. Place the battery on the
back of the phone (battery connectors downwards, the top near the arrow inside the
case). Then push the battery into place in the direction of the antenna.

Before first use
4
LNOTE:
A new battery is not completely charged (see “Charging the battery” page 12).
Turn the phone face up
3 To switch on the phone.
Press and hold the key .
LNOTE
For the Pilot Key see page 5 and “Description of
the phone” page 8.
4 Enter your PIN code if asked
(see page 11).
If you make a mistake, press . Then
confirm by pressing the Pilot Key or
by pressing .
PIN CODE
5 Wait for the 2 beeps.
The connection with the network is
established. The green LED flashes and
the screen looks like this:
• To set the time and date, see page 41.
6 Enter the phone number.
If you make a mistake press .
DIALLING
7Press .
Once connected, your phone emits two
beeps.
8 To end the call press .

Before first use
5
Using the carousel
The carousel is a circular loop of icons displayed on the screen. These icons provide access to
the different menus and sub menus used to operate your phone.
The Pilot Key provides access to all the menus used to operate your phone. To select a
function, place the icon above the cursor +and press the Pilot Key .
With the Pilot Key you can select or adjust all the functions of your phone (see Menu Memory
Jogger cards and see the manual for details of menus pages 23 and 24).
Example
To a d j u s t t h e c o n t r a s t
After switching the phone on, press the Pilot Key to access the main Menu:
Move the Pilot Key up or down and position the icon above the cursor.
Then confirm by pressing the Pilot Key .
You can use the Pilot Key in 3 ways:
- by moving it upwards
- by moving it downwards
- by pressing it in
When you switch on your phone, the idle screen appears. To
access the main menu, press the Pilot Key .
When you move the Pilot Key the carousel moves
across the screen:
- upwards the icons scroll clockwise.
- downwards the icons scroll anti clockwise.
Oper. Services
Messages Send SMS
Mailboxes
Read SMS
Settings
Accessories
Security
Main
Menu
PHILIPS
* Subscription dependent.
Broadcast SMS
Display
Time and Date
Language
Hotkeys
Call settings
Names
Call list
Extras
Access settings
Settings
Help
OK
OK
OK
Sounds
SMS settings
Oper. services*
Voice command
Organiser
Launch
OK
Network
WAP
Service numbers
Quick settings
Services
Last page
Favourites
Oper. Services
Settings

Before first use
6
This gives you access to the Settings sub menu:
Move the Pilot Key up or down and position the icon above the cursor. Then
confirm by pressing the Pilot Key .
You enter the Display menu.
Move the Pilot Key up or down and position the icon above the cursor. Then
confirm by pressing the Pilot Key .
You enter the Contrast menu:
The active parameter appears underlined on the screen. In the above example it is Level 3.
Adjust the contrast by moving the Pilot Key up or down and confirm by pressing the
Pilot Key .
Activate/deactivate
Under the Display menu go to Animation menu, select it and then, using the Pilot Key,
you can activate or deactivate some functions.
Move the Pilot Key up or down to select On or Off, then confirm by pressing the
Pilot Key .
Using the Names and other lists
You can also use your Names list using the Pilot Key.
In idle screen move the Pilot Key downwards to access the Names list. By moving the Pilot
Key down, you move down into the Names list. Turning it upwards moves up the Names list.
Confirm your selection by pressing on the Pilot Key .
In idle screen move the Pilot Key upwards to access the Call list.
• To return to the previous menu, press or press and hold the
Pilot Key .
• To return to the idle screen, press and hold .
Display
Contrast

Before first use
7
Glossary
DTMF Dual Tone Multi Frequency.
The tones are transmitted by the phone to the network. They are used to
interrogate answering machines, transmit codes, ...
EFR Enhanced Full Rate. Standard for high quality sound. Your phone will switch on
EFR if the GSM network supports this function and asks for it.
FDN Fixed Dialling Numbers. See also Public Names.
GSM Global System for Mobile communications. The type of phone network used
by your phone.
GSM 900 GSM standard using 900 MHz frequency band (see page 56).
GSM 1800 GSM standard using 1800 MHz frequency band (see page 56). Also called DCS
1800 (Digital Cellular System) or PCN 1800 (Personal Communication
Network).
Home network The network to which you subscribe to.
Home Zone A particular area within your home network. If this feature is provided by your
home network, the home zone symbol is displayed indicated that you are
currently within the home zone.
Idle screen This is the screen which is displayed after registering to your network
(see page 14).
Local network The network where you are making a call. This may be your home network or
another GSM network.
Multi-call Two calls are in progress, one active and one on hold.
PIN code Personal Identification Number. The secret code of the SIM card.
PIN2 code Secret code that allows you to access certain SIM card dependent features.
Public Names Function that allows you to restrict dialling to selected numbers
PUK code Secret code used to unblock your SIM card if you, or someone else, enters the
wrong PIN code three times.
PUK2 code Secret code used to unblock your SIM card if you, or someone else, enters the
wrong PIN2 code three times.
Roaming Using your phone in a network other than your home network.
SIM card Subscriber Identification Module. The card which allows you to make phone
calls with your GSM phone.
SMS Short Message Service. This service provided by the operator allows you to
send and receive short written messages.
T9TM Text Input Efficient method of text input that requires just one key press per letter.
WAP Wireless Application Protocol. Global standard that allows you to
access internet services provided by operators.

Your phone
8
Yo u r p h o n e
Description of the phone
1 Antenna
2LED
- Green flashing slowly - means the phone
is registered with a network.
- Green flashing quickly - means a call has
been received but not yet answered.
- Red flashing - means the battery is low.
3Earpiece
4 Pilot Key
It allows fast and easy access to the
different menus and allows you to
confirm your choice .
- During a call, it controls the volume.
- In the Names list, menus or lists it
scrolls up or down.
- When entering a name or number, it is
used to move the cursor left or right.
- To return to the previous menu by
pressing and holding it. To validate by
pressing and holding it in an editor
screen.
5 Graphic display
6 Green key symbol
- Press to accept a call or dial a number.
- Press and hold in idle screen to launch
the WAP browser.
- Press in WAP mode to select the left
option box displayed at the bottom of
the screen.
7 Red “Hang up” and
“On / Off” key symbol
- Press to switch your phone on, press
and hold to turn your phone off.
- Press to end a call.
- Press in WAP mode to select the right
option box displayed at the bottom of
the screen.
8Cancelkey
Navigation mode:
- Press this key to return to the previous
menu.
- Press and hold it to return to the idle
screen.
Edition mode:
- Press this key to delete a character.
- Press and hold it to delete all the
characters.
9 Alphanumeric keypad
Standard phone keypad. It can also be
used for entering alphabetic characters
and activating hotkeys.
10 Microphone
11 Battery and micro SIM card
See page 3 for installation.
1
4
9
10
7
5
6
2
8
11
3

Your phone
9
Screen
Carousel
A loop of icons on your display which provides access to the
menu of your choice.
Date and time
Displayed in idle screen. To set the date and time, see "Settings"
pages 36 and 41.
Symbols
In idle screen up to 13 symbols can be displayed corresponding
to a specific function:
Alarm clock
Your alarm clock is activated.
Silent
Your phone will not ring when
receiving a call.
Vibrator
Your phone will vibrate when receiving
a call.
Keypad lock
Protects the keys from being pressed
accidentally.
SMS message
You have received a new message.
SMS full
Memory for messages is full. You must
delete old messages before you can
receive new ones.
Battery
The bars indicate the battery level
(4 bars = full, no bars = recharging is
needed).
aNetwork : your phone is connected
to a network
Reception quality : the more bars
are shown the better the reception is.
Call Forward Unconditional to
number
All your incoming voice calls are being
forwarded to a number other than
voice mail.
Call Forward Unconditional to
voice mailbox
All your incoming voice calls are being
forwarded to voice mail.
Home zone
Indicates that you are currently within
the home zone. This is subscription
dependent.
Roaming
Indicates that you are using a network
other than your subscribed one.
Vo i c e m a i l
You have received a new voice mail.
Oper. Services
Network Name
12 jun 2000
s

Initial start up procedure
10
Initial start up procedure
The micro-SIM card
To use your phone, you must insert a valid SIM card that is supplied by your GSM service
provider.
Your phone requires a micro-SIM card.
The SIM card contains your subscription number and your GSM phone number. It also
contains a memory in which you can store phone numbers and messages. If you use your SIM
card on another phone, your phone number and your Names list remain the same.
Inserting your subscriber card (micro SIM card)
See page 3.
Your PIN code and PUK code
When you switch on the phone, it asks you for the PIN code. The PIN code is the 4 to 8-digit
secret code of the SIM card.
If you enter a wrong PIN code, you can try again. If you enter a wrong PIN code 3 times, your
SIM card is blocked.
You must then enter your PUK code to unblock the phone. This code will be given to you by
your service provider. If you enter an incorrect PUK code ten times in a row the card will be
completely blocked and unusable. If this happens contact your service provider.
Your PIN2 code and PUK2 code
Depending on your SIM card, you may have some features on your phone that require you to
enter a PIN2 code. This is a secret 4 to 8-digit code given to you by your service provider.
If you enter a wrong PIN2 code 3 times, your SIM card is blocked and you must enter the PIN2
unblocking code (PUK2) given to you by your service provider.

Initial start up procedure
11
The battery
Your phone is powered by a rechargeable battery. A new battery is not fully charged. Charge
it by following the procedure on page 12.
The bicon shows the level of charge in the battery. Each bar represents approximately 25%
of the maximum charge.
If the phone emits a warning signal (see page 38), the red LED flashes and the display shows
Battery low, you should re-charge the battery.
The battery, attached to the phone or not, should not be exposed to temperatures exceeding
60°C (e.g. behind glass in direct sunlight).
We advise you to keep the battery attached to the phone, even when discharged. The backup
battery for the clock (inside the phone) will last longer.
We do not recommend to remove the battery when the phone is switched on: you may lose
all your personal settings.
LNOTE:
Please refer to the information on battery safety, page 56.
Clipping on the battery
See page 3.
Removing the battery
A battery is only fully charged after having been charged and then totally discharged two
or three times.
• Press the locking button located alongside the antenna while pushing the
battery in the direction of the arrow as shown on the drawing.
• Remove the battery.

Initial start up procedure
12
Charging the battery
A charger is supplied with the phone, in the box.
The bsymbol indicates the state of charge:
• During charging the 4 charge indicators change. If the first bar is dark, the battery already has
a 25% charge.
• The bars darken one after another during charging.
• When all 4 bars are dark the battery is fully charged. A minimum of 1hr40mn charging is
required to obtain a 90% charge with the Standard battery (capacity: 900 mAh). For the
maximum charge continue charging.
• When the battery is charged, remove the connector by pressing the release button on top
of the connector. Recharge the battery before it is totally flat.
LNOTES:
1. You can turn your phone on and use it while it is charging.
2. The only way to turn the battery charger off is to unplug it from the mains outlet; for this reason use a
mains outlet with easy access.
3. You can connect the charger to an IT supply (Belgium only).
4. If the battery is completely flat, the battery icon will only reappear after 2 or 3 minutes of charging.
• Clip the battery on the phone.
• Plug the charger into the right socket at the base of the phone as shown
below.
• Plug the transformer unit into a mains AC power socket with easy access.

Initial start up procedure
13
Making an emergency call
112: European emergency call
Key in the emergency number for your present location (e.g. 112 or other official emergency
number). Emergency numbers vary depending on the location.
LNOTE:
1. Some networks may require a SIM card for emergency calls. Check with your service provider.
2. You can also enter the emergency number using the keypad, even when the keypad is locked.
• Switch on the phone.
The display shows the welcome screen.
Even if you are asked for your PIN code, your phone will function without it.
• Enter the emergency number (112) or press Pick-up key if PIN code
asked.
• Press .
The phone dials the number.
• To hang up, press .

Using your phone
14
Using your phone
Switching on
LNOTE:
The PIN code requirement is a security feature that you can switch on and off using the “PIN protection” menu
(see page 40).
Idle screen
After switching on (and entering the PIN code), your phone
displays the idle screen which means that the phone is ready to be
used. At the same time:
•the
aicon is displayed and the LED to the left of the antenna
flashes, this indicates that the phone is connected to the
network. The network name appears on the screen.
• the symbol is displayed, indicating the quality of reception
(when all 4 bars appear, the audio quality is at its best).
If the asymbol and the network name are not displayed, the network is not currently available.
You may be in a bad reception area (perhaps in a tunnel or between tall buildings). If possible,
move to a different location.
If you navigate through the menus or the Names list, the phone automatically returns to idle
screen if a key is not pressed for 2 minutes. During this period of time you can still receive a
call.
How to enter a text or a number
Characters and numbers are located on each key as follow :
Key Label Upper case alphanumeric Lower case alphanumeric
1space 1 @ _ # = < > ( ) & £ $ ¥ space 1 @ _ # = < > ( ) & £ $ ¥
2ABC A B C 2 A Ä Å Æ Ç a b c 2 à ä å æ ç
3DEF D E F 3 É E ∆Φd e f 3 é è ∆Φ
4GHI G H I 4 ΓIghi4Γì
5JKL J K L 5 Λj k l 5 Λ
6MNO M N O 6 Ñ Ò Ö m n o 6 ñ ò ö
7PQRS P Q R S 7 βΠΘΣp q r s 7 βΠΘΣ
8TUV T U V 8 Ü Ù t u v 8 ü ù
9WXYZ W X Y Z 9 Ø ΩΞΨ w x y z 9 ø ΩΞΨ
0.V. 0 , / : ; " ’ ! ¡ ? ¿ * + - % . 0 , / : ; " ’ ! ¡ ? ¿ * + - %
*+T9- Toggles between the different Text Input
modes (see page 21)
- Access to the WAP menu in WAP mode
- Toggles between the different Text Input
modes (see page 21)
- Access to the WAP menu in WAP mode
#=lower case upper case lower case upper case
• Press and hold the key.
• Enter your PIN code if asked and press the Pilot Key .
12 jun 2000
Network Name
s

Using your phone
15
For example, when using the basic text input, to enter "Love", you have to press three
times, press three times, press three times and press twice. The word "Love"
will appear on the screen. For more details, see pages 21, 21 and 22.
LNOTES:
1. A number can contain a maximum of 40 digits, depending on your SIM card.
2. It is a good idea to enter all numbers, even local ones, with their international prefix, country code and area
code. Thus you can dial all numbers from any location.
3. To correct mistakes, press and release to delete one digit.
4. For an efficient text editing you may use T9™ Text Input (see page 21).
Events in idle screen
Some events may modify the idle screen (missed call, new
message, reminder from the organiser, etc.). In this context,
press the Pilot Key to access a contextual menu or press
on the key to go back to idle.
Making a call
In idle screen :
LNOTE:
1. You can also make a call from the Names list (see page 25).
2. If a number has been programmed on a direct access key, you can call this number by pressing and holding
the key (see Flash dial page 17).
3. If the called number is in the Names list, the corresponding name will be displayed instead of the number.
Answering and ending a call
When receiving a call, the phone rings, the animation and Incoming call appear
on the display, and the green LED flashes. Depending on your subscription, the caller’s number
may be displayed, if your correspondent has enabled this information to be transmitted. If this
number is in the Names list, the corresponding name shall be displayed instead of the number.
1 missed
MISSED CALL
• Enter the phone number using the keypad.
To correct an error, press . To move through numbers move the Pilot Key
upwards or downwards .
For an international call, you can enter the "+" key instead of the usual international
prefix. To do this press and hold .
•Press .
The phone dials the number.
• After the call, press to hang up.

Using your phone
16
LNOTES:
1. The phone will not ring if the ringer is deactivated (see page 20).
2. If you have a Vibra Battery you may activate the vibrator function to be discretely warned of incoming calls (see
Vibrator page 38).
3. If you have selected Any Key Answer (see page 45), you can accept a call by pressing any key (except )
or by pressing the Pilot Key.
Redial and reply
The phone stores the last 30 numbers (called, missed or received). You can redial or reply to
any of these numbers and dial it directly. The most recent is displayed first.
In idle screen:
LNOTES:
You can directly access the Call list by moving up the Pilot Key .
• To answer a call you can either:
• press .
• press the Pilot Key , a carousel with the following options appears:
• Silent ringer
The ringer volume of this incoming call is set to silent and the phone goes back to
the incoming call screen.
•Acceptcall
•Rejectcall
• To hang up a call you can either :
• press .
• press the Pilot Key , a carousel appears:
•select
End Call and confirm.
• If you want to reject the call, press .
The caller hears the busy tone.
If you have activated “Call forward when busy” (see page 44), the call is diverted to the
selected number (your voice mailbox, for example)
Silent
Accept call
Reject call
End call
• Press the Pilot Key to access the main Menu.
Select Call list. This displays a chronological list of the last calls either received
or dialled.
If a number is in your Names list, the corresponding name is displayed.
• Move the Pilot Key up or down to select the number you want to redial or
reply.
•Press .
The phone dials the number. Wait for your correspondent to answer.
• After the call, press to hang up.

Using your phone
17
Voice dial
You can automatically dial a number by saying your correspondent’s name.
In idle screen:
LNOTES:
1. The duration of a voice tag is 2 seconds.
2. Up to 15 voice tags can be defined and shared between voice dial and voice command.
Flash dial
You can associate any of the keys to with a Names list entry to give you direct
access, through a single long key press, to a frequently used phone number (see page 25). Keys
and are defined and cannot be changed. (See page 42).
In idle screen:
During a call…
You can:
• Adjust the earpiece volume (see page 18)
• Mute or unmute the microphone (see page 18)
• Write a number in the notepad (see page 18)
• Consult the Names list (see page 19)
• Add a name to the Names list (see page 25)
• Write and send a message via the Names list or the Notepad (see page 25)
• Read a message (see page 28)
• Check a voice mailbox or access a voice server via the Notepad (see page 30)
•Toprogramavoicetag:
Press the pilot Key to access the main Menu and select Names. In the
Names menu, choose the Name you want to add a Voice dial to. Press the
Pilot Key twice then select Voice dial then Add Voice tag?.
Follow the instructions displayed on the screen which invite you to say, then to repeat
the voice tag.
• To dial a number associated with a voice tag:
Press and hold the Pilot key, then say the voice tag of the number to dial.
If the phone recognises the voice tag, it repeats it then immediately dials the number
associated with it.
• Press and hold a key between and to dial the associated entry.
The connection is established.
• After the call press to hang up.