Philips EP 4300 Series User manual

Philips EP
 series
 series

2
Philips EP Series
Contents
Important repair instructions
•Only skilled personnel should carry out the repair.
•After repair the appliance should function properly.
•Afterrepair the appliance has to meet the regulatory- and safetyrequirements thatwere applicable at the
time of release of the model.
•After repair the appliance always has to be tested for electrical safety according VDE 0701-0702 and for
medical products IEC 62353.
General information 3
Technical information
Maintenance products
Production date (or serial number)
Optional (accessories)
Overview
Technical information 7
Water circuit
Electric circuit
Coee and machine specications
Specic tools and equipment
Specication for the measurement of the coee products temperature
Specication for the measurement of the Milk products temperature.
Operating logic
Brew Unit mainteinance - where to grease and positions
Disassembly- and Reassembly advice 18
Test mode 27
Functions/features explanation 57
Steam out
Descaling
Temporary solutions
Espresso Philips Service Center (EPSC)
Deactivate AquaClean lter reminder
Deactivate the beeping sound of the buttons
Reset drinks settings to default setting
Repair Flow
Error Codes
Version history 67


Technical information
•Voltage :  -  V
•Frequency :  -  Hz
•Power consumption :  W
•Standby power consumption: . W
•Auto shut-o time :  min
•Capacity water tank : . litres removable
•Capacity coee bean :  g
•Capacity LatteGo :  ml
•Capacity Coee grounds :  pucks
•Cord lengh : . m
•Pump pressure :  bar
•Adjustable spout height :  -  mm
•Weight and dimensions:
-Weight of product :  - . kg
-Dimensions of product :  x  x  mm
(WxDxH)
Maintenance products
• Descaler 
• Jar of Grease 
• Silicone grease 
Production date (or serial number)
Optional (accessories)
•AquaClean water lter CA
•Descaling solution CA
•Brew group grease HD
•Coee oil remover tablets CA
General information


Philips EP Series
Overview
Series 4000 CMF Series 4300 LatteGo
Series 5400 LatteGo
General information


Series 4000 CMF
Series 4300 LatteGo
General information


Philips EP Series
Series 5400 LatteGo
General information


Water circuit
Electric circuit
Technical information


Philips EP Series
Coee and machine specications
Drinks Min. qty
( ml)
Default qty
(ml)
Max. qty
(ml)
Espresso   
Ristretto   
Coee   
Cae Crema   
Espresso Lungo   
Americano   
Cappuccino (Coee + milk) 
()

()

()
Cae latte (Coee + milk) 
()

()

()
Cafe au lait (Coee + milk) 
()

()

()
Late macchiato
(Coee + milk)

()

()

()
Flat White 
()

()

()
Frothed milk   
Travel Mug   
Hot Water   
Coee grounds drawer Description and values
Time-out for coee grounds drawer  seconds
Reset dreg counter Dreg emptying alarm, if the coee grounds drawer is removed for
more than  seconds.
STANDBY Description and values
Time (default)  minutes
Time programmed by Consumer/Service NO
Boiler temperature during Standby Boiler OFF
WATER TANK Description and values
Water reserve (pulses) with water lter  ml ( pulses)
Water reserve (pulses) with no water lter  ml ( pulses)
Water reserve modiable by Production/Service departments NO
“Fill tank” alarm YES
Connect to water mains NO
Technical information


Specic tools and equipment
Description Notes
Flathead screwdriver # , # 
Torx screwdriver (T)
Pliers for Oetiker clamps
Digital Thermometer Type K (accuracy for temperature of , % or ± ,°C)
Temperature probe PK- (AK-A Thermocouple adapter required)
Scale KERN EMB - or comparable device with a base accuracy of
, % or ± , g
Power meter Voltcraft EnergyCheck  or comparable device with a base
accuracy of  % or ± W
Stopwatch Basic model
Serkit Tool needed for programming with our service tool
EP series cable Cable for Philips EP-- series
EPSC (Espresso Philips Service Center) Tool used to ash the SW on the machines (for SW upgrade and
diagnostics mode). Refer to SDA_
Technical information


Philips EP Series
Specication for the measurement of the coee products temperature
Before measuring the in-cup temperature make sure the following conditions will be met:
Conditions:
a) Water temperature in tank: °C (+/-°C).
b) Use a plastic cup (see picture ).
c) Use a digital thermometer (see picture ) (e.g. type K probe diameter max mm (see picture ).
d) The coee machine is tested without any change of parameters or calibrations, which may aect the
temperature of products, so the measurement oftemperature must be done with machine in default factory
setting.
Procedure:
. Place the plastic cup under the dispensing spout. (picture )
. Dispense coee
. Measure the temperature immediately after coee has being dispensed, you need to nish the
measurement within  seconds. The temperature in the cup is measured by placing the probe of the
thermometer in the cup near the bottom. Then stir the probe in the cup for  to  times and read out the
thermometer values during stirring. Hold the probe still in the center of the cup.
. Record the highest value.
Depending on the coee volume selected to measure, you would need to position the probe on several
height levels to measure the correct temperature in the plastic cup.
mm for gr - mm for gr - mm for gr (see Picture ).
Technical information
Espresso Coee Italy Q.ty 40 gr.
Temperature of 1st product 69°C ≤85°C
Temperature of 2nd product 72°C ≤85°C
Coee Q.ty 120 gr.
Temperature of 1st product 72°C ≤85°C
Picture 1 Picture 2
OFF Tare ON
10 mm
for 120gr and
superior
Ø max 2mm
17 mmfor 60gr
35 mm
for 35gr
Picture 3
DISPLAY