Philips CD6451B/51 User manual

Welcome
Quick start guide
1Connect
2Install
3Enjoy

What’s in the box
CD640/CD645 Handset
CD640 Base station
OR
CD645 Base Station Power supply unit for
base station
Line cord 2 x AAA Rechargeable
batteries Belt clip
(Country dependent)
CD640 or CD645
User manual
Guarantee
1.1.1
Quick start guide
Welcome
Connect
Install
Enjoy
1
2
3
Quick start guide
CD640
The line adaptor may not be attached to the line cord. You may find the line
adaptor in the box. In this case, you have to connect the line adaptor to the line
cord first before plugging the line cord to the line socket.
In multi-handset packs, you will find one or more additional handsets, chargers with
power supply units and additional rechargeable batteries.
Warning Always use the cables and batteries that are supplied with your
phone.

1Connect
Connect the base station
2Install
Insert rechargeable batteries and charge
1. Insert the plug of the power cord into the socket under the base station.
2. Insert the plug of the line cord into the socket under the base station.
3. Connect the other end of the line cord together with the line adaptor if
necessary, to the telephone line socket and the other end of the power cable to
the electricity socket.
Insert batteries Charge handset for 24 hours
Configure your phone (if necessary)
After charging your phone for a few minutes, the Welcome screen appears.
1. Press to display the list of countries
2. Press / to scroll to your country
3. Press to confirm your selection
12
3
Connect the
power supply
Connect the
line cord to the
line socket

3Enjoy
Set the alarm
1. Press to access the main menu
2. Press / to select Clock & Alarm
3. Press and / to select Alarm
4. Press and / to select Off, On Once, or On Daily
5. Press to save the settings
Set the time
1. Press to access the main menu
2. Press / to select Clock & Alarm
3. Press to select Set Date/Time
4. Press
5. Enter the current time (HH:MM) in 24-hour format and the current date
(DD/MM/YY)
6. Press to save the settings
Rename your handset
1. Press to access the main menu
2. Press / to select Personal Set
3. Press and / to select Handset Name
4. Press to enter the handset name
5. Press to save the settings
Make a call
Press and dial the number
OR
Dial the number and press or
Answer a call
When the phone rings, press or .
End a call
Press
Set the earpiece volume
During a call:
Press / to select the earpiece volume from level one to level five
3111 285 34821

Set the ring melody
1. Press to access the main menu
2. Press / to select Personal Set
3. Press to select Handsest Tones
4. Press and / to select Ring Melody
5. Press and / to scroll to your desired ring melody
6. Press to save the settings
Store a number in the phonebook
1. Press to access the main menu
2. Press / and to select Phonebook
3. Press to select New Entry
4. Enter the name (maximum 12 characters)
5. Press to enter the number (maximum 24 digits)
6. Press to choose a group (<No Group>, <Group A>, <Group B>,
<Group C>)
7. Press to save the entry
Access the phonebook
1. Press to access the phonebook
2. Press / to select your desired phonebook entry
3. Press to view the details of your selected phonebook entry
Set a wallpaper to be displayed in standby mode
1. Press to access the main menu
2. Press / to select
Personal Set
3. Press and / to select Wallpaper
4. Press and / to scroll to your desired wallpaper
5. Press to save the settings
Adjust the contrast level
1. Press to access the main menu
2. Press / to select Personal Set
3. Press and / to select Contrast
4. Press and / to scroll to your desired contrast level
5. Press to save the settings
Set the color theme
1. Press to access the main menu
2. Press / to select Personal Set
3. Press and / to select Color Theme
4. Press and / to scroll to your desired color theme
5. Press to save the settings

Troubleshooting
For more information, see the user manual that came with your CD640 or
CD645.
Need help?
User Manual
See the User Manual that came with your CD640 or CD645.
Online help
www.philips.com/support
Listen to new messages recorded on answering machine (applicable to
CD645 only)
1. Press on the base station to turn on the answering machine
2. Press on the base station, playback of the oldest new message will begin.
3. Press to skip the current message and play the next message
4. Press to go back to previous message if it is pressed within one second of
current message playback
5. Press to replay current message if it is pressed after one second of current
message playback
6. Press to increase or to decrease speaker volume during message playback
7. Press to delete the current message
See CD645 user manual for details about the answering machine function.
Problem Solution
No dialing tone •Charge the batteries for at least 24 hours
•Move closer to the base station
•Use the line cable provided
Poor audio quality •Move closer to the base station
•Move the base station at least one metre
away from any electrical appliances
The is blinking •Register the handset to the base station
•Move closer to the base station
The handset LCD displays
nothing
•Try again by disconnecting and connecting the
base station power supply and follow the
procedure to register a handset
•Make sure the two supplied rechargeable
batteries have been inserted into the battery
compartment
•Make sure the supplied batteries are charged up
Caller Line Identification
(CLI) service does not work
•Check your subscription with your network
operator