Philips CD3652S/90 User manual

Register your product and get support at
www.philips.com/welcome
Quick Start Guide
CD360
CD365
1
2
3
CD360-365_90_EN_QSG_V3.0
Printed in China
Connect
Install
Enjoy
Press• to turn on/off the answering machine in standby mode.
Start/Stop playback: Press
• .
Adjust the volume: Press
• / .
Skip backward:
•
During message playback, press to play the message from the beginning.
During the first second of the current message, press to play the
previous message.
Skip forward: Press
• to skip to the next message.
Delete the current message: Press
• .
Listen to messages recorded on the answering machine
(for CD365 only)
Note
For more information, see the Telephone answering machine section•
in the user manual.
Troubleshooting
Welcome to Philips
Need help?
Check your phone connections.•
The handset is out of range. Move it closer to the base station.
The signal icon flashes.
The handset is out of range. Move it closer to the base station.•
If the handset displays [UNREGISTERED], register the handset.
The caller ID does not display.
The service is not activated. Check with your service provider.•
The caller’s information is withheld or unavailable.
For more information, see the User Manual.
No dialing tone
Register your product at www.philips.com/welcome
Refer to the User Manual that came with your new phone.
www.philips.com/support
© 2009 Koninklijke Philips Electronics N.V. All rights
reserved. Reproduction in whole or in part is prohibited
without the written consent of the copyright owner.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
User Manual
Online help
0168
1 Press .
2 Select a contact and view the available information.
1 Press
to access the phonebook.
2 Select a contact in the phonebook list.
3 Press to make the call.
View the phonebook
Call from the phonebook

What’s in the box
Handset
Base station with
bracket for CD360
OR
CD365
User manual
Power supply
Guarantee
Line cord*
Quick Start Guide
Note
Caution
In some countries, you have to connect the line adaptor to the line cord, then•
plug the line cord to the line socket.
In multi-handset packs, there are additional handsets and chargers with power
•
supply units.
Use only the supplied batteries and adaptor
•
1
3
2
Connect
Enjoy
Install
Connect the base station
Install the handset
1 Connect the output plug of the power socket to the bottom of the base station.
2 Connect the power socket to a standard wall outlet.
3 Connect the telephone line cord to the phone socket at the bottom of the base
station and the wall phone socket.
1 Press
and dial the phone number; or
2 Dial the phone number and Press to dial out the call.
1 When you see the welcome message, press [OK], select
your country, press [OK] to confirm.
The country setting is saved.»
2 Set the date and time.
The phone is now ready to use.»
1 Press menu.
2 Select [PERSONAL SET] > [HANDSET TONES] >
[RING TONES], then press [OK] to confirm.
3 Select a ringtone, then press [OK] to confirm.
The setting is saved.»
1 Press menu.
2 Select [PHONEBOOK] > [NEW ENTRY], then press [OK] to confirm.
3 Enter the name then press [OK] to confirm.
4 Enter the number, then press [OK] to confirm.
When the phone rings. Press or to answer the call.
Press .
Press or to adjust the volume during a call.
1 The batteries are pre-installed in the handset. Pull the battery tape off from
the battery door before charging.
2 Place the handset on the base station to power up.
Make a call
Configure your phone (if necessary)
Set the handset’s ringtone
Add a record
Answer a call
End a call
Adjust the earpiece volume
R
CD365
CD365
R
Note:
Charge the batteries for 24 hours before first use.
For more information on the battery icon status, see the User Manual.