Philips MT3120 User manual

MT3120
Register your product and get support at
www.philips.com/welcome
Quick start guide

• Use only the power supply listed in the user
manual.
• Do not allow the product to come into contact
with liquids.
• Risk of explosion if internal, rechargeable battery
is replaced by an incorrect type.
• Dispose of used, internal batteries according to
the instructions. (Refer to the full user manual
online)
• This is a handsfree product with high speaker
volume. Make sure the product is not too close
to your ear.

1
/
/

2

3
2
1

4
Set country, language, date
and time.
1
2
3
4

5
Register your phone
1 Put the base of your original cordless phone
in registration mode to connect to the handsfree
phone (as described in your original phone’s user
manual). 2Typically locate the on the base, and
press and hold it for approximately 10 seconds to
enter registration mode. 3 If the PIN code of your
original phone base is not recognized automatically,
enter it on your handsfree phone’s screen.
1 2
3
>10s
PIN

6
Wear / place your clip
phone >15cm
<1.5m

7
Make a call
1
2
3

8
Answer a call
Alex
1