Philips 7FF1CME User manual

•Packing list
•Initial setup
•Specification
Getting started
Packing List
Digital Photo Frame Photo Frame Stand
Quick start guide User manual CD
Power adaptor USB Cable to PC
(male A type plug)
What else you'll need
Power outlet Digital Photos, memory card or PC
©2005 Koninklijke Philips Electronics NV
A
ll rights reserved. Reproduction, copying, use, modification, hiring, renting, public performance,
transmission and/or broadcasting in whole or in part is prohibited without written consent of Philips
Electronics NV

•
Packing list
•Initial setup
•Specification
Getting started
Initial setup
Philips digital Photo Frame can be placed either vertically or horizontally to fit
the photos on display. Its internal rechargeable battery provides you the
freedom to pass it around and show photos without the power cord. Or, you
can place it somewhere in the room for constant Photo Frame by connecting
it to the main.
A. Removing the protective bag/film on parts
B. Attaching the Photo Frame stand
•Place head of stand into socket
•Rotate clockwise until stand locks in-place
C. Connecting to a power source
•
Connect the supplied power cable from Photo Frame to a power outlet .
The internal battery will start charging and the battery LED turn orange.
Locate control keys
•Use your Photo Frame by pressing the control keys in the back.

RETURN TO TOP OF THE PAGE
•LCD display also shows the function icon for each key at the same position.
Previous/Left Switch view Setup
Next/ Right Show/ Hide icon Photo setting
Up Copy Confirm
Down Delete Escape
C. Turning on Photo Frame
•Slide the power switch up to the ON position.
The power LED will be green and the Startup screen will appear.
D. Choose your preferred language
•Press the key (the 3rd key from the left on the rear of Photo Frame)
A menu with general settings for Photo Frame will appear.
•Use the or key to highlight Language and press the key to
select.
•Use the or key to choose your preferred language. Press to
confirm your selection. The new setting will be effective immediately.
•Press again to leave the Language menu.

•Packing list
•Initial setup
•Specification
Getting started
Specification
Picture/Display
-Effective display area: 137 x 91 mm (5.4" x 3.6"), 6.5" diagonal
-Vertical dot pitch: 0.1905 mm
-Horizontal dot pitch: 0.1905 mm
-Resolution: 720 x 480 pixels
-Brightness: 200 nits
-Viewing angle (CR>5): Horizontal (-85°~85°), Vertical (-85°~85°)
-Backlight Half-Life time: 20,000 hours
Connectivity
- Card reader: Built-in Secure digital (SD), Multimedia card (MMC), Memory stick
(MS, MS Pro), Compact flash (CF) type I only.
Convenience
Photo format supported: Up to 12M pixels, JPEG photos following EXIF and DCF
standards
Memory size: 50 photos or more
Placement supported: Landscape, Portrait
Control buttons: 6 buttons
Display mode Automatic slideshow, Full-Screen browse, Thumbnail browse
Setup menu:

Photo menu:

OSD languages: English, French, German, Italian, Spanish, Simplified Chinese,
Russian, Japanese
Plug & Play compatibility: Windows 2000/XP or later, Mac OS X or later, Linux
Accessories
-Included accessories: AC power adaptor (AC 100~240V 50/60 Hz 0.36A-->DC 5V
2.5A), USB cables, Quick start guide
-User manual: Yes (in CD-ROM)
Power
-Power LED indicator Green (power on), Off (power off)
-Battery LED indicator Orange (charging), Off (not charging)
-Power mode supported Battery powered, AC powered

•Viewing
photos
•
Copying
photos
•Viewing
photo
slideshows
•Deleting
and
Rotating
p
hotos
Enjoying photos
Viewing Photos
When there is no memory card in photo Frame, it displays photos stored in local memor
y
When a memory card is inserted to Photo Frame, it will display photos from most recentl
y
connected media in a "Last-in, First-display" order.
You can choose from three Photo Frame viewing modes. Press ( the 1st key fro
m
the left on the rear of Photo Frame) to to
gg
le amon
g
the three viewin
g
modes; us
e
to view the previous photo and to view the next photo. ( and are the firs
t
two keys from the right on the rear of Photo Frame. )
THUMBNAIL-List of photos.
AEach icon represents the function of the corresponding
key in the rear of Photo Frame.
BSource of photos on screen
Memory stick Compact flash
SD, MMC Photo Frame
CCurrent Photo
DCurrent Photo number
ESlideshow icon
(If shown, this photo will be shown in slideshow.)
FCurrent photo number, same as D

GTotal photo count
HResolution of current photo (in pixels).
IDate current photo was taken
JSource of displayed photos.
SLIDESHOW- Automatic, Rotating display of photos.
BROWSE—Manual viewing of photos one-by-one. (Displays size and date)
Each icon represents the function of the corresponding key in the rear of Photo Frame.

AEach icon represents the function of the corresponding
key in the rear of Photo Frame.
B Source of photos on screen
Memory stick Compact flash
SD, MMC Photo Frame
C Current Photo number
D Total photo count
E Resolution of current photo (in pixels)
F Date current photo was taken
Viewing photos on Photo Frame
•Remove any memory card from photo Frame.
Photos stored in the Photo Frame will appear.
Viewing digital camera photos from a memory card
•Insert the memory card into the slot in the frame:
•For Compact Flash card, firmly slide card in the larger slot end first and face DOWN.
•For SD, MMC, or Memory Stick card, slide card in the smaller slot end first and face UP
until it locks in-place.
After a few seconds photos on the memory card will display.
How to remove a memory card:
•To remove Compact Flash card, pull out the card slowly.
•To remove SD, MMC, or Memory Stick card, push the card again to unlock and then pull
out the card.

•Viewing
photos
•
Copying
photos
•Viewing
photo
slideshows
•Deleting
and
Rotating
p
hotos
Enjoying photos
Copying Photos
You can copy photos stored on a memory card, or PC to Photo Frame. Photo Frame will
then internally store a resized copy of the original photo. This resized copy will remain
inside Photo Frame until you delete it from Photo Frame.
Photo Frame's internal memory will store 50 or more resized photos. Please see the
Deleting and Rotating Photos section to learn how to delete photos stored in Photo Frame.
Copying from a memory card
You may copy photos one by one in Browse mode or several photos at once in Thumbnail
Mode
Copying photo one by one in Browse mode
•Change view mode to Browse.
•Insert the memory card into Photo Frame.
Photos from memory card will appear.
•With the photo for copy shown on screen, press the key (the 4th key from the left
on the rear of Photo Frame). Four different orientations of the selected photo will appear.
•Use the or key to select the desired photo orientation and then press the
key.
Do not remove the memory card before the copy screen disappears upon completion.
If a warning message shows up indicating no free space for more photos, you may need
to remove some already stored photos first before copying more photos.
•After the copy screen disappears upon completion, a resized copy of the photo is stored
inside Photo Frame.
•You may move to other photos and continue this process until all the photos you want
are copied to Photos Frame.
Copy several photos at once in Thumbnail mode
•Change view mode to Thumbnail.
•Insert the memory card into Photo Frame.
Photos from memory card will appear.
•Highlight the photo for copy in Thumbnail mode and press the key (the 4th key from
the left on the rear of Photo Frame).
A multi-photo copy screen with small photos from current thumbnail screen will appear.

•
Use the or key to move, to add photos to copy list, to remove photos
from copy list, and then press the to confirm the copy list.
Photos on the copy list are shown with a small copy icon .
Do not remove the memory card before the copy screen disappears upon completion.
If a warning message shows up indicating no free space for more photos, you may need
to remove some already stored photos first before copying more photos.
•You may move to other Thumbnail pages and continue this process until all the photos
you want are copied to Photo Frame.
copying PC Photos to Photo Frame
•For copying photos from a PC to the Photo Frame , install the Auto Run software Photo
Frame manager
Philips Auto Run Program for Photo Frame is a windows based application for user to
manage photos between Philips Photo Frame and PC. It provides easy-to-use user
interface for user to browse and preview the photos in both PC directories and Photo
Frame albums, and for user to perform operations, such as copying, moving and deleting
photo(s).
•For installation and more detail about the application, please follow the instructions in
the PC software user manual located on the CD

•Viewing
photos
•Copying
photos
•Viewing
photo
slideshows
•Deleting
and
Rotating
p
hotos
Enjoying photos
Viewing Photo Slideshows
When you set the Photo Frame view mode to Slideshow, it will automatically rotate the
Photo Frameed on screen. You may handpick the photos for slideshow and choose
slideshow frequency – for example, how long a photo remains on screen – transition
effect – how next photo replaces current one on screen – and sequential or random
Photo Frame. You may also select to show all slideshow photos in either vertical or
horizontal orientation to match how you place the Photo Frame.
Picking photos for slideshow
Note: This function only applies to photos stored on Photo Frame's internal memory.
•Change view mode to Browse or Thumbnail.
•Press the key (the 4th key from the left on the rear of Photo Frame).
A menu with specific settings for the selected photo will appear.
•Press the key to select Show in slideshow setting and use the or key to
decide if you want to display this photo in the Slideshow mode.
Default setting is Yes for Show in slideshow.
•Press the to confirm.
Now your selected setting is confirmed.
•Press to leave this menu.
Choosing slideshow frequency
Note: This function applies to photos stored on all media.
•Press the key (the 3rd key from the left on the rear of Photo Frame).
A menu with general settings for Photo Frame will appear.

•Press the key to select Slideshow settings and use the or key to move to
the Frequency item. Next press the key again to select Frequency settings.
•Use the or key to highlight the interval a photo remains on screen and press
to confirm.
•Now your selected setting is confirmed.
•Press to leave this menu.
Choosing transition effects
Note: This function applies to photos stored on all media.
•Press the key (the 3rd key from the left on the rear of Photo Frame).
A menu with general settings for Photo Frame will appear.
•
Press the key to select Slideshow settings and use the or key to move to
the Effect item. Press the key again to select Effect settings.

•Use the or key to highlight the way one photo replaces the next on screen.
Press to confirm your selection.
Now your selected setting is confirmed.
Press to leave this menu.
Choosing photo order
Note: This function applies to photos stored on all media.
•Press the key (the 3rd key from the left on the rear of Photo Frame).
•A menu with general settings for Photo Frame will appear.
•Press the key to select Slideshow settings and use the or key to move to
the Order item. Next press the key again to select Order settings.
•Use the or key to highlight your preference and press to confirm.
Now your selected setting is confirmed.
•Press to leave this menu.
Indicating Photo Frame placement orientation
•Press the key (the 3rd key from the left on the rear of Photo Frame).
A menu with general settings for Photo Frame will appear.

•Press key to select Slideshow settings; press key again to select Orientation.
•Use the or key to highlight how you want to place Photo Frame. Press to
confirm your selection.
Now your selected setting is confirmed.
•Press to leave this menu.
Selecting correct photo orientation for Slideshow
Note: This function only applies to photos stored on Photo Frame's internal memory.
•Change the view mode to Browse or Thumbnail.
•Press the key (the 4th key from the left on the rear of Photo Frame).
A menu with specific settings for the selected photo will appear.
•
Use the or key to highlight Rotate. Next, press the to select.

•
Use the or key to move the highlight among different rotation angles until the
thumbnail image on the left shows the desired orientation for the selected photo.
•
Press to confirm.
Now your selected settings are confirmed.
•
Press to leave this menu.

•Viewing
photos
•Copying
photos
•Viewing
photo
slideshows
•Deleting
and
Rotating
p
hotos
Enjoying photos
Deleting and Rotating photos
Sometimes you may want to delete some photos stored on Photo Frame or change th
e
orientation of photos. Here is how:
Rotating a photo
Note: This function only applies to photos stored on Photo Frame's internal memory.
•Press the key (the 4th key from the left on the rear of Photo Frame).
A menu with specific settings for the selected photo will appear.
•Use the or key to highlight Rotate and press the key to select.
•Use the or key to highlight the desired orientation for this photo; press the
key to confirm.
Deleting a photo
Note: This function only applies to photos stored on Photo Frame's internal memory.
You may delete photos one by one in Browse mode or several photos at once in
Thumbnail mode.
Delete photo one by one in Browse mode
•Change the view mode to Browse mode.
•Press the key (the 4th key from the left on the rear of Photo Frame).
A menu with specific settings for the selected photo will appear.
•Use the or key to highlight Delete and press the key to select.

•
Use the or key to highlight Delete Photo; Press to confirm.
•When you delete a photo, Photo Frame will show status and return to Brose mode after
completion.
Delete several photos at once in Thumbnail mode
•Change view mode to Thumbnail.
•Highlight the photo for delete in Thumbnail mode and press the key (the 2rd key
from the left on the rear of Photo Frame).
A multi-photo delete screen with small photos from current thumbnail screen will appear.
•
Use the or key to move, to add phtos to delete list, to remove photos
from delete list, and then press the key to confirm the delete list.
Photos on the delete list are shown with a small delete icon .
•After the delete screen disappears upon completion, all the photos on the delete list are
deleted from Photo Frame.
•You may move to other Thumbnail pages and continue this process to delete all the
photos you want to delete from Photo Frame.

•Selecting
brightness,
language
and set
time
functions
•Checking
Photo
Frame
status
•Taking
care of
your Photo
Frame
Optimizing Photo Frame
Selecting brightness, language and set time functions
Use this section to select Photo Frame brightness levels and on-screen information displa
y
language. You may also enter your local time and then set a different brightness level fo
r
the evening hours from 6:00PM~6:00AM. In addition, you can set your daily automati
c
turn-off and turn-on time for Photo Frame!
Setting a general brightness level
•Press the key (the 3rd key from the left on the rear of Photo Frame).
A menu with general settings for Photo Frame will appear.
•Use the or key to highlight Brightness. Next press the key to select.
A brightness bar with scales and current value will appear.
•Use the or key to modify the brightness level and press to confirm and exit
the menu.
Now your selected settings is confirmed.
•Press to leave this menu.
Setting your local time
•

Press the key (the 3th key from the left on the rear of Photo Frame).
A menu with general settings for Photo Frame will appear.
•Use the or key to highlight Time functions. Next press the key to select.
•Press the key again to select Current Time.
A clock will appear for you to set Hours, Minute, and AM/PM.
•
Use the or key to set Hours; next then press the key to move to Minutes and
use the or key to set Minute. Use to move back for any changes.
•Press to confirm.
Now your settings are confirmed.
•Press to leave this menu.
Setting evening brightness level
Local time must be set correctly before setting up this feature