Philips AS111 User manual

www.philips.com/welcome
EN User manual
Register your product and get support at
AS111

3
English
EN
Contents
1 Important 4
Safety 4
Notice 5
2 Your Android docking speaker 6
Introduction 6
What's in the box 6
Overview of the main unit 6
3 Get started 7
Connect power 7
Adjust the brightness of display panel 7
Adjust the brightness of night light 7
Set clock 8
Turn on 8
Connect Bluetooth 8
4 Play music with Fidelio 9
Instrall Fidelio on your Anroid phone 9
Install Songbird on your Android phone 13
Connect Android phone to the
docking system 15
5 Other features 17
Listen to internet radio 17
Set sleep timer 17
Set alarm timer 18
Synchronize music from your computer 19
6 Product information 21
 
7 Troubleshooting 22

4EN
1 Important
Safety
This 'bolt of lightning' indicates uninsulated
material within your unit may cause an electrical
shock. For the safety of everyone in your
household, please do not remove product
covering.
The 'exclamation point' calls attention to
features for which you should read the enclosed
literature closely to prevent operating and
maintenance problems.

shock, this apparatus should not be exposed to

such as vases, should not be placed on this
apparatus.
CAUTION:To prevent electric shock, match
wide blade of plug to wide slot, fully insert.
Important Safety Instructions
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
g Install in accordance with the
manufacturer's instructions.
h Do not install near any heat sources such
as radiators, heat registers, stoves, or

produce heat.
i Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and the
point where they exit from the apparatus.
j Only use attachments/accessories

k Use only with the cart, stand, tripod,

manufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
l Unplug this apparatus during lightning
storms or when unused for long periods
of time.
m 
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
n Apparatus shall not be exposed to
dripping or splashing.
o Do not place any sources of danger on


p Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.

5
English
EN
Warning
 Never remove the casing of this apparatus.
 Never lubricate any part of this apparatus.
 Never place this apparatus on other electrical
equipment.
 Keep this apparatus away from direct sunlight, naked

 Ensure that you always have easy access to the power
cord, plug or adaptor to disconnect the apparatus from
the power.
Notice

device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
This product complies with the radio
interference requirements of the European
Community.
To check the EC DECLARATION OF
CONFORMITY, go to: http://download.p4c.

eng.pdf
Recycling
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When you see the crossed-out wheel bin
symbol attached to a product, it means the
product is covered by the European Directive
2002/96/EC:
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products.The correct
disposal of your old product helps prevent
potentially negative consequences on the
environment and human health.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
Norge

Observer: Nettbryteren er sekundert innkoplet. Den
innebygde netdelen er derfor ikke frakoplet nettet så
lenge apparatet er tilsluttet nettkontakten.

apparatet ikke utsettes for regn eller fuktighet.
Note
 The type plate is located on the bottom of the
apparatus.

6EN
2 Your Android
docking speaker
Congratulations on your purchase, and

support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this unit, you can enjoy audio from the
Android phone.
What's in the box
Check and identify the contents of your
package:
 Main unit
 Power adapter
 Quick start guide
Overview of the main unit
a Dock for Android phone
b Display panel
 Show time.
 Show Bluetooth status.
c
 Turn on/off Bluetooth.
d CLOCK/NIGHT LIGHT
 Set time.
e +/-
 Adjust volume.
 Adjust time.
a
b
c
d
e

7
English
EN
3 Get started
Always follow the instructions in this chapter in
sequence.
Connect power
Caution
 Risk of product damage! Ensure that the power voltage
corresponds to the voltage printed on the back or
underside of the device.
 Risk of electric shock! When you unplug the power
adapter, always pull the plug from the socket. Never
pull the cord.
Connect the power adapter to:
 the rear socket of the docking system.
 the wall socket.
Adjust the brightness of
display panel
1 In standby mode, press CLOCK/NIGHT
LIGHT repeatedly to adjust the brightness
of display panel.
» The brightness of the time digits on
the display panel toggles between high,
medium and low level.
Adjust the brightness of night
light
1 Press .
» Bluetooth indication light on the
display panel begins to blink.
2 Press CLOCK/NIGHT LIGHT repeatedly
to adjust the brightness of the night light at
the bottom.
» The brightness of the night light toggles
between high level, normal level and
off mode.

8EN
Set clock
1 In standby mode, press and hold CLOCK/
NIGHT LIGHT for two seconds to
activate clock setting mode.
» The [24H] begins to blink.
2 Press +/- to set the 12/24 hour format.
3 Press CLOCK/NIGHT LIGHT
» The hour digitbegins to blink.
4 Repeat step 2 and 3 to set the hour and
minute.
» The set time is displayed.
Note
 When an Android phone is connected, the docking
system synchronizes time with the phone automatically.
Turn on
Press .
» The Bluetooth indication light on the display
panel begins to blink.
Switch to standby mode
Press again to switch the docking system to
standby mode.
» The Bluetooth indication light on the display
panel goes off.
Connect Bluetooth
1 Press to open Bluetooth on the device.
» The Bluetooth indication light begins
to blink.
2 Go to > [Wireless
>

3 Tab  to turn on
Bluetooth.
4 Tab .
» [PHILIPS AS111](PHILIPS AS111) is
displayed.
5 Tab [PHILIPS AS111] on the screen.
» When you hear the "Du-du" sound,
your phone and the device are
connected through Bluetooth.
» The shown time on the device is
synchronized with the phone.
Note
 After Bluetooth connection, you may play music on
your phone through the docking speaker.

9
English
EN
4 Play music with
Fidelio
Instrall Fidelio on your Anroid
phone
To enjoy more features, you are recommended
to download and install free software "Fidelio".
There are two ways to download "Fidelio".
Install "Fidelio" through QR code
Note
 Make sure that your phone is connected to the
internet.
 Make sure that your phone has a scanning software
application. If you don't have one, download one from
Andorid market.
1 Use the scanning software to scan the QR
code on the package.
2 Tab to start "Fidelio"
downloading.

10 EN
3 Tab the downloaded Fidelio application.
» The system asks whether you want to
install Fidelio.
Android_Fidelio.apk
4 Press to install the Fidelio
application.
5 Tab .
Install
Done

11
English
EN
» Fidelio's icon is displayed on the home
page.
Note
 You can also search for "Fidelio" in the Android market
directly, and then the phone downloads and installs
"Fidelio App" automatically.
Install "Fidelio" through Anroid
Market
Note
 Make sure that your phone is connected to the
internet.
 Make sure that you Android phone is equipped with
Android Market.
1 Tab the Android Market icon on your
phone screen.
2 Tab the search icon on the screen to
access search bar.

12 EN
3 In the search bar, type in the "Fidelio" and
search for "Fidelio".
4 
"Fidelio" to start Fidelio download.
Fidelio
5 Tab the downloaded Fidelio application.
» The system asks whether you want to
install Fidelio.
6 Press [Install] to install the Fidelio
application.
Android_Fidelio.apk
Install

13
English
EN
7 Tab [Done].
» Fidelio's icon is displayed on the home
page.
Note
 You can also search for "Fidelio" in the Android market
directly, and then the phone downloads and installs
"Fidelio App" automatically.
Done
Install Songbird on your
Android phone
Songbird is one part of Fidelio application.You
are recommended to download and install free
software "Songbird".
Install songbird on your phone
1 Tab the Fidelio icon on the main screen to
open Fidelio application.
» You are requested to download

Fidelio application.
Fidelio

14 EN
2 Tab .
» Songbird is downloaded.
3 Tab the downloaded songbird application.
» The system asks whether you want to
install songbird.
download
Songbird.apk
4 Tab .
» Songbird is installed.
5 Tab  to access Songbird
menu.
Install
Open

15
English
EN
6 Select your desired song, and tab .
» You now may enjoy the beautiful music
through the device.
Note
 
may go to the Fidelio home menu to access songbird,
and the system will request for Songbird download
again.
Install Songbird on your computer
Go to the website www.philips.com/songbird,
download the newest Songbird application and
install it on your computer.
Connect Android phone to
the docking system
To connect your Android phone to the docking

only needs to be done once.
Load the Android phone
1 Check the orientation of the micro USB
connector on the Android phone, and
rotate the Android dock connector on the
docking speaker if necessary.Then dock
your Android phone onto the device.

16 EN
2 Slide the connector to the center of the
device.
3 Rotate the knob on both sides of the
connector to make the phone stable.
Note
 After your Android phone is loaded, the time on the
display panel is automatically synchronized to the time
on your phone.
Charge the Android phone
When the docking system is connected to
power, the docked Android phone starts
charging automatically.

17
English
EN
5 Other features
Listen to internet radio
1 Connect your phone and the device
through bluetooth.
2 Open Fidelio application and go to the
main menu.
3 Tab  on the main menu.
4 Type in the radio station you desired in the
search bar.
5 Tab the desired radio station.
» Your desired radio station begin to
broadcast.
Set sleep timer
1 Open Fidelio application.

18 EN
2 Tap the icon to access clock setting
Menu.
3 Tap [Sleep Timer](Sleep timer).
4 Select 10/15/20/30/45/60/90 min, then tap
[Start](Start).
Note
 Sleep timer only works with songbird.
Set alarm timer
1 Open Fidelio application.
2 Tap the icon to access clock setting
Menu.

19
English
EN
3 Tap [Alarm settings](Alarm settings).
4 Tap 
5 Set the alarm time, and tap [Save](Save) on
the top right of the screen.
» The new alarm is saved and displayed
on the screen.
Tip
 You can set an alarm for your favorite outdoor sport

select your sport and preferred weather(excellent,
good, or fair).The alarm won't ring if the weather is not
good enough.
 You can go to [Sound](Sound), and select your favorite
music as your alarm sound.
Synchronize music from your
computer
Note
 Make sure that both your computer and phone are
installed with Songbird application.
1 Connect your phone with the computer.
Select [Managing device using Philips
Songbird](Managing device using Philips
.
» The songbird user interface is
displayed.
2 Check [Auto Sync Music](Auto Syn Music)
and [Sync all music and playlists](Sync all
music and playlists).

20 EN
3 Click the button [Sync](Sync) on the top
right of the interface.
» The music on your computer is
synchronized into your phone.
Note
 When you phone is connected to this computer next
time, synchronization happens automatically.

21
English
EN
6 Product
information
Note
 Product information is subject to change without prior
notice.
System requirements and

System
requirements
Android system(Version 2.1
or above),
Bluetooth 2.1 or above,
Micro USB connector.


Rated Output
Power:
2X2 W
Signal to
Noise Ratio:
75 dBA
General
information
AC power
(power
adaptor):
AS150-059-AA240(Philips);
AS150-059-AI240(Philips);
AS150-059-AE240(Philips)
Input: 100-240V~ 50/60Hz
0.7A
Output:5.9 V 2.4A
S018KU0590240 (Philips);
S018KV0590240 (Philips);
S018KB 0590240 (Philips);
S018KS 0590240 (Philips);
Input: 100-240V~50/60Hz
500mA
Output: 5.9V 2400mA
Operation
Power
Consumption:
8W
Eco Standby
Power
Consumption:
<1W
Charging: maximum 1A for micro USB
Dimensions -
Main Unit
(W x H x D):
171 X 102.6 X 171 mm
Weight - Main
Unit:
0.605kg
If micro USB connector located at the top,
screen auto-rotation is available(Android 2.3
or above)Visit www.philips.com/FlexiDock for
more details.