Philips DS3110/12 User manual

Register your product and get support at
www.philips.com/welcome
DS3110
EN User manual

2EN
Contents
1 Important 3
2 Your Docking Speaker 4
Introduction 4
What’s in the box 4
Overview of the main unit 4
3 Get started 5
Connect power 5
Turn on 5
4 Play 6
Play from iPod/iPhone 6
Play from an external device 8
Adjust volume 9
  
 
General information 9
6 Troubleshooting 10
7 Notice 10

3EN
1 Important
 Read these instructions.
 Heed all warnings.
 Follow all instructions.
 Do not use this apparatus near water.
 Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
 Do not install near any heat sources such
as radiators, heat registers, stoves, or

produce heat.
 Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
 
by the manufacturer.
 Unplug this apparatus during lightning
storms or when unused for long periods
of time.
 
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
 Battery usage CAUTION –To prevent
battery leakage which may result in bodily
injury, property damage, or damage to the
unit:
 Install all batteries correctly, + and - as
marked on the unit.
 Do not mix batteries (old and new or

 Remove batteries when the unit is not
used for a long time.
 Batteries (battery pack or batteries


 Apparatus shall not be exposed to
dripping or splashing.
 Do not place any sources of danger on the


 The USB socket is for data transmission
only.
 Where the plug of the Direct Plug-in
Adapter is used as the disconnect device,
the disconnect device shall remain readily
operable.
Know these safety symbols
This ‘bolt of lightning’ indicates uninsulated
material within your unit may cause an electrical
shock. For the safety of everyone in your
household, please do not remove product
covering.
The ‘exclamation mark’ calls attention to
features for which you should read the enclosed
literature closely to prevent operating and
maintenance problems.

shock, this apparatus should not be exposed to

such as vases, should not be placed on this
apparatus.
CAUTION:To prevent electric shock, fully
insert the plug. (For regions with polarized
plugs:To prevent electric shock, match wide

Warning
 Never remove the casing of this apparatus.
 Never place this apparatus on other electrical
equipment.
 Ensure that you always have easy access to the power
cord, plug or adaptor to disconnect the apparatus from
the power.

4EN
2 Your Docking
Speaker
Congratulations on your purchase, and

support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this docking speaker, you can
 enjoy audio from the iPod/iPhone, and
other external audio devices; and
 synchronize the iPod/iPhone with your
computer through USB socket.
What’s in the box
Check and identify the contents of your
package:
 Main unit
 AC power adaptor
 Quick start guide
 Safety sheet
Overview of the main unit
a
b
c
d
e
f
a Dock for the iPod/iPhone
b /
 Adjust volume.
 As LED indicators, show system status.
c
 Turn the docking speaker on.
 Switch the docking speaker to standby
mode.
d Power supply socket
 Connect AC power.
e
 Sync with PC through a USB cable.
f MP3-LINK
 Connect an external audio device.

5EN
3 Get started
Always follow the instructions in this chapter in
sequence.
Connect power
This docking speaker can be powered by either
AC power or batteries.
Option 1:AC power
Caution
 Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the unit.
 Risk of electric shock! When you unplug the AC
adaptor, always pull the plug from the socket. Never
pull the cord.
Connect the AC power adaptor to:
 the power socket at the back of the
docking speaker.
 the wall socket.
Option 2: Battery power
Caution
 Risk of explosion! Keep batteries away from heat,

 Remove batteries if they are exhausted or will not be
used for a long time.
 Batteries contain chemical substances, so they should
be disposed of properly.
1 Open the battery compartment.
2 Insert 4 x 1.5V AA batteries with correct

3 Close the battery compartment.
Turn on
Press to turn the docking speaker on.
» The / LED indicators light up.

6EN
Switch to standby mode
The docking speaker switches to standby mode
in the following situation:
 Press again;
 The speaker is idle for 15 minutes when
powered by AC supply.
 The iPod/iPhone or external audio device
is disconnected when the speaker is
operated on batteries.
» The / LED indicators light off.
4 Play
Play from iPod/iPhone
You can enjoy audio from your iPod/iPhone
through this docking speaker.
Compatible iPod/iPhone
The docking speaker supports the following
iPod and iPhone models:
Made for.
 iPod touch (1st, 2nd, 3rd, and 4th

 iPod classic
 iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th

 iPhone 4S
 iPhone 4
 iPhone 3GS
 iPhone 3G
 iPhone
Listen to the iPod/iPhone
To enjoy more features, you are recommended
to install the free DockStudio app.
1 Press to turn the docking speaker on.
» The LED indicators light up.
2 Insert the iPod/iPhone into the dock.

7EN
3 
install DockStudio app on your iPod/
iPhone.
4 Tap [Yes] 
request.
5 Follow the on-screen instructions to
complete the installation.
6 Launch the app after the installation.
7 Play audio on your iPod/iPhone.
» Audio comes out through this docking
speaker.
Note
 With the DockStudio app, you can enjoy music, set
clock and alarm, adjust sound settings, and update


DockStudio
app will search for it automatically and ask you
to download it.
Note
 Make sure that your iPod/iPhone is inserted in the
docking speaker and connected to the Internet.
1 OK.
2 Follow the on-screen instructions to


8EN
Note
 Do not disconnect power or undock the iPod/iPhone
during the updating process.
Charge the iPod/iPhone
Note
 If the docking speaker is operated on the batteries, you
cannot charge your iPod/iPhone.
When the docking speaker is connected to
AC power, the docked iPod/iPhone begins to
charge.
Tip
 For certain iPod models, it may take up to a minute
before the charging indication appears.
Sync iPod/iPhone with PC
Note
 
in your PC.
1 Insert the iPod/iPhone in the dock.
2 Press to switch to standby mode.
» The LED indicators light off.
3 Connect your docking speaker and PC
with a USB cable.
4 Launch iTunes to synchronize your docking
speaker with PC.
» The docked iPod/iPhone is
synchronized with PC successfully
through the iTunes.
Note
 Due to different materials and product techniques,
some USB cables may not work with this device.
Play from an external device
With this docking speaker, you can also enjoy
audio from an external device such as an MP3
player.
Note
 Make sure that no iPod/iPhone is docked in the speaker.
1 Press to turn the docking speaker on.
2 
to:
 the MP3-LINK socket at the back of
the docking speaker.
 the headphone socket on an external
device.
» The docking speaker switches to MP3
link mode automatically.
3 Play audio on the device (see the device’s


9EN
Adjust volume
To adjust volume:
 Press +/- on your docking speaker; or
 Adjust the volume control of your iPod/
iPhone or external device.
Tip
 If the docking speaker is powered by batteries, the
volume is lower than that by AC supply.
5 Specifications
Note
 Product information is subject to change without prior
notice.

Rated Output Power 2 X 5 W RMS
General information
Power supply
- AC Power
- Battery
Model: AS190-090-

Input: 100-240 V ~,
50/60Hz, 0.7A;
Output: 9 V 1.9 A
4 x AA batteries
Operation Power
Consumption <10 W
Standby Power
Consumption <0.5 W
Max. load for iPod/
iPhone 5 V 1 A
Dimensions
- Main Unit
 224 x 162 x 120 mm
Weight
- Main Unit
- With Packing
1.1 kg
1.6 kg

10EN
6 Troubleshooting
Warning
 Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site

Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
No power
Make sure that the AC power adaptor of
the device is connected properly.
Make sure that there is power at the AC
outlet.
Make sure that the batteries have been
installed correctly.
No sound or poor sound
Adjust the volume of your docking speaker.
Adjust the volume of your iPod/iPhone or
external audio device.
No response from the unit
Disconnect and reconnect the AC power
plug, and then switch on the device again.
Cannot sync with PC
Switch the docking speaker to standby
mode.
Try another USB cable.
Install iTunes in PC properly.
7 Notice

device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
“Made for iPod” and “Made for iPhone”
mean that an electronic accessory has been


the developer to meet Apple performance
standards. Apple is not responsible for the
operation of this device or its compliance with
safety and regulatory standards. Please note that
the use of this accessory with iPod or iPhone
may affect wireless performance.
iPod and iPhone are trademarks of Apple Inc.,
registered in the U.S. and other countries.
This product complies with the radio
interference requirements of the European
Community.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product

11 EN
is covered by the European Directive 2002/96/
EC.
Please inform yourself about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste. Correct disposal of
your old product helps to prevent potential
negative consequences for the environment and
human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.Please inform yourself about the local
rules on separate collection of batteries
because correct disposal helps to prevent
negative consequences for the environmental
and human health.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to



Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.

Specifications are subject to change without notice
© 2012 Koninklijke Philips Electronics N.V.
All rights reserved.
DS3110_12_UM_V1.0