Philips AS111/05 User manual

www.philips.com/welcome
User manual
Register your product and get support at
AS111

3
English
EN
Contents
1 Important 4
Safety 4
2 Your docking speaker for
AndroidTM 5
Introduction 5
What's in the box 5
Overview of main unit 5
3 Get started 6
Connect power 6
Turn on 6
Adjust brightness of display panel 6
Adjust brightness of night light 7
4 Play and charge 8
Compatible with AndroidTM 8
Play music through Bluetooth 8
Play audio through auto Bluetooth
connection with Fidelio app 10
Install "Songbird app" to enjoy music 16
Dock and charge Android-powered
device 19
5 Other features 21
Set time 21
Listen to internet radio 21
Set sleep timer 22
Set alarm timer 23
6 Product information 25
 
7 Notice 26
Recycling 26
8 Troubleshooting 27

4EN
1 Important
Safety
 Read these instructions.
 Keep these instructions.
 Heed all warnings.
 Follow all instructions.
 Do not use this apparatus near water.
 Clean only with dry cloth.
 Install in accordance with the
manufacturer's instructions.
 Do not install near any heat sources such
as radiators, heat registers, stoves, or

produce heat.
 Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
 
by the manufacturer.
 Unplug this apparatus during lightning
storms or when unused for long periods
of time.
 
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
 Apparatus shall not be exposed to
dripping or splashing.
 Do not place any sources of danger on the


 Where the plug of the Direct Plugin
Adapter is used as the disconnect device,
the disconnect device shall remain readily
operable.
Warning
 Never remove the casing of this apparatus.
 Never lubricate any part of this apparatus.
 Never place this apparatus on other electrical
equipment.

5
English
EN
2 Your docking
speaker for
AndroidTM
Congratulations on your purchase, and

support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this docking speaker, you may enjoy
following features:
 Enjoy audio from your Bluetooth-enabled
portable device;
 Charge your device with micro USB
connector;
 Know the time;
 Experience various features brought by
Philips Fidelio app and Songbird app.
What's in the box
Check and identify the contents of your
package:
 Main unit
 Power adapter
 Dock extension
 Quick start guide
 Safety sheet
Overview of main unit
a Dock base
b Display panel
 Show time.
 Show Bluetooth status.
c
 Turn Bluetooth on/off.
d CLOCK/NIGHT LIGHT
 Set time.
 Adjust the brightness of display panel
or night light.
e +/-
 Adjust volume.
 Adjust time.
a
b
c
d
e

6EN
3 Get started
Always follow the instructions in this chapter in
sequence.
Connect power
Caution
 Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the back
or underside of the device.
 Risk of electric shock! When you unplug the power
adapter, always pull the plug from the socket. Never pull
the power cord.
Connect one end of the power adapter to the
rear socket of the docking speaker, and the
other to the power outlet.
Turn on
Press .
» The Bluetooth indicator on the display
panel begins to blink.
Switch to standby mode
Press again to switch the docking speaker to
standby mode.
» The Bluetooth indicator on the display
panel goes off.
Adjust brightness of display
panel
In standby mode, press CLOCK/NIGHT
LIGHT repeatedly to adjust the brightness of
display panel.
» The brightness of the time digits on the
display panel toggles between high, medium,
and low level.

7
English
EN
Adjust brightness of night
light
In power-on mode, press CLOCK/NIGHT
LIGHT repeatedly to adjust the brightness of
the night light at the bottom.
» The brightness of the night light toggles
between high level, normal level, and off
mode.

8EN
4 Play and charge
With this docking system, you can enjoy audio
in two ways:
 through manual Bluetooth connection;
 through automatic Bluetooth connection
with Philips Fidelio app.
Compatible with AndroidTM
To make full use of your docking speaker, your
phone should satisfy the following requirements:
 With Android operation system (Version

 With Bluetooth software (Version 2.1 or

 With a micro USB connector.
For other non Android-powered smartphone
with micro USB connector and Bluetooth, you
can still use the docking speaker to do the
following:
 Charge your phone through the
connector;
 Enjoy audio through Bluetooth.
Tip
 
Play music through Bluetooth
1 Press to activate Bluetooth on the
device.
» The Bluetooth indicator begins to
blink.
2 On your phone, go to [Settings]
[Wireless and networks]
[Bluetooth
settings] 
3 Tap [Bluetooth]
Bluetooth on your phone.
4 Tap [Search for devices] (Search for


9
English
EN
5 Tap [PHILIPS AS111].
» A Bluetooth pairing request appears.
6 Tap [Accept]
portable device with the docking speaker.
» A different Bluetooth icon can be
found on the top of the screen and
the device are connected through
Bluetooth.
7 Play music through audio player on your
portable device.
» The music comes out through the
docking speaker.
Note
 The settings on the phone may vary from model to
model.
 To keep constant Bluetooth connection, keep your
portable device within 10 m to the docking speaker.

10 EN
Play audio through auto
Bluetooth connection with
Fidelio app
Philips Fidelio app brings a suite of new features
to your docking system, including automatic
Bluetooth connection, Songbird music player,
Internet radio and a multi-function alarm clock.
To enjoy more features, you are recommended
to download and install free "Fidelio app".
Install "Fidelio app" onto Android
powered device
You have two ways to install "Fidelio app" on
your Android-powered device.
Install "Fidelio" through QR code
Note
 Make sure that your Android powered device is
connected to the Internet.
 Make sure that your Android powered device has a
scanning software application. If you do not have one,
download one from Android market.
1 Use the scanning software to scan the QR
code.
2 Ta p [Install] 
3 Tap [Accept & download] (Accept &

» Fidelio app downloading and
installation starts.

11
English
EN
» Fidelio app is installed.
» Fidelio app's icon is displayed on the
home page.
Install "Fidelio" through Anroid Market
Note
 Make sure that your Android powered device is
connected to the Internet.
 Make sure that you Android powered device is
equipped with Android Market.
1 Tap the Android Market icon on the main
screen.