Philips DVDR3512V/12 User manual

Quick Start Guide
2007 © Koninklijke Philips N.V.
All rights reserved.
12 NC 3139 245 26222
Need help?
User Manual
See the user manual that came with your Philips recorder.
Online
Go to www.philips.com/support.
3Enjoy
Start recording
A
Record to DVD or VCR
APress DVD to record to a recordable DVD.
OR, press VCR to record to a VHS tape.
BLoad in a blank recordable DVD to the disc tray or a
VHS tape to the tape deck.
CPress SOURCE repeatedly to select the source to
record from (eg, TUNER, CAM1, DV, EXT1 or EXT2).
zTo record a TV programme, use P+/-on the
remote control to select a programme channel.
DPress REC MODE repeatedly to select a desired
recording mode (refer to the Record Mode table).
EPress REC zto start recording.
Note To set the recording time, press REC z
repeatedly to extend the recording time in 30 minute
increments. The recording will stop automatically at
the designated end time.
zTo record from an external device, press PLAY
on the device to start playback.
FTo stop the recording, press STOP x.
B
Dubbing (VCR îDVD)
APress VCR to dub from VCR to DVD.
OR, press DVD to dub from DVD to VCR.
BLoad in a blank recordable DVD to the disc tray or a
VHS tape to the tape deck.
CPress DIRECT DUBBING.
Dubbing to DVD
OK
SP
Rec. Mode
OK Cancel
01:54
Remaining Time
DSelect the desired recording mode, then move to
OK
in the menu and press OK on the remote
control to start dubbing.
ETo stop the dubbing, press STOP x.
DVD Recorder /VCR DVDR3510V
DVDR3512V
Connect
Set up
Enjoy
1
2
3
What’s in the box?
DVD Recorder / VCR
Remote Control
and 2 batteries
RF Coaxial Cable
User
Manual
Start playback
A
From a disc
APress DVD on the remote control.
BPress OPEN/CLOSE Z, load a disc and close the disc
tray.
CPress PLAY/PAUSE uto start playback.
DTo stop playback, press STOP x.
B
From a VHS tape
APress VCR on the remote control.
BInsert a pre-record VHS tape into the tape deck.
Press REW mto rewind the tape if necessary to the
beginning of the recording.
CPress PLAY/PAUSE uto start playback.
DTo stop playback, press STOP x.
REC MODE
VCR DVD
PLAY/PAUSE
SOURCE
DVDR3510V_qsg_eng_26222.indd 1DVDR3510V_qsg_eng_26222.indd 1 2007-07-26 4:53:58 PM2007-07-26 4:53:58 PM

1Connect 2Set up
DSetup and install TV channels.
Highlight and press right X.
Select { Channel Search } and press OK to start
automatic TV channel search.
Channel Search
Modify Channel Information
Sort Channels
Setup - Channel Setup
Search
Edit
Sort
Note This process may take several minutes. Once
complete, the total number of channels found and
stored appears on the TV.
ESet the date and time.
Highlight and press right X.
Select { Date (dd/mm/yy) } or { Time (hh:mm:ss) }
and press OK. Use the numeric keypad 0-9 to
input the date/time, then press OK to confirm.
Setup - Clock
01/01/07
00:01:08
Auto
Date (dd / mm / yy)
Time (hh : mm : ss)
Date - Time Setting
Date - Time Preset
Show DivX® Registration Code
P001/Ch003
OK
Note The settings will be updated according to the
broadcast channel information of preset Programme
Number 1.
FPress SETUP to exit.
Basic Connection
Before Connecting
Select one of the following basic connections ( Aor B) according to the type of connecting devices you have.
If your TV is currently connected to a VCR, you have to unplug all the connections from your VCR and TV.
Your new Philips Recorder replaces the VCR for your recording needs.
Option A
Use this connection if you are connecting the antenna
cable directly from the antenna wall socket or from a
Cable Box without a Scart output socket.
AUnplug the antenna cable that is currently connected
to your TV and plug in the antenna cable to the
ANTENNA socket on this recorder.
BConnect the supplied RF coaxial cable from the
TV socket on this recorder to the Antenna In
socket on the TV.
CConnect a scart cable (not supplied) from the EXT1
TO TV-I/O socket on this recorder to the Scart
input socket on your TV.
DPlug in the power cable from the recorder to an AC
power outlet.
3139241 26501
TOTV - I/O
EXT1
AUX- I/O
EXT2S-VIDEO
(Y/C)
AUDIO
R
L
AUDIO/ VIDEO OUT AUDIOOUT
COMPONENT
VIDEOOUT
VIDEO
(CVBS)
ANTENNA
TV
COAXIAL
DIGITALAUDIO OUT
MAINS
P
R
P
B
Y
SCART IN
From an off-
air antenna
wall socket or
cable box
Television ( rear)
Note See the accompanying user manual for other possible connections (e.g. Composite Video, Component Video, S-VIDEO).
Option B
Use this connection if your current antenna cable is
connecting through a Cable Box with Scart output
socket.
AKeep the existing antenna connection from the Cable
box to your TV.
BConnect a scart cable (not supplied) from the EXT1
TO TV-I/O socket on this recorder to the Scart
input socket on your TV.
CConnect another scart cable from the EXT2 AUX-
I/O socket on this recorder to the Scart output
socket on the Cable Box.
DPlug in the power cable from the recorder to an AC
power outlet.
TOTV - I/O
EXT1
AUX- I/O
EXT2S-VIDEO
(Y/C)
AUDIO
R
L
AUDIO/ VIDEO OUT AUDIOOUT
COMPONENT
VIDEOOUT
VIDEO
(CVBS)
ANTENNA
TV
COAXIAL
DIGITALAUDIO OUT
MAINS
P
R
P
B
Y
SCART IN
Philips Recorder (rear)
From an off-air
antenna wall socket
Television ( rear)
Philips Recorder
(rear)
Cable Box (rear)
A
Finding the viewing channel
APress STANDBY-ON on the recorder.
BTurn on the TV and other connected devices (e.g.
Cable Box, Satellite Receiver).
CIf your TV does not switch to the correct viewing
channel, press the Channel Down button (or AV,
SELECT, °button) on the TV’s remote control
repeatedly until you see the blue DVD background
screen. This is the correct viewing channel for the
recorder.
B
Start basic setup
Use the recorder’s remote control and follow the on-
screen instructions to complete the installation.
APress SETUP on the remote control.
Setup - General
Screen Saver
Country
Video Output Selection
Restore Factory Settings
On
Germany
SCART RGB
OK
Note Use up Sand down Tkeys to toggle
through the options. Select an item by pressing
right X. To conrm a setting, press OK.
BSelect the country of your residence.
Highlight and press right X.
Select { Country } and press OK to confirm
your selection.
CSelect the recorder’s menu display language.
Highlight and press right X.
Select { On Screen Display Language } and press
right X.
Select the desired language option and press OK to
conrm your selection.
DVDR3510V_qsg_eng_26222.indd 2DVDR3510V_qsg_eng_26222.indd 2 2007-07-26 4:53:59 PM2007-07-26 4:53:59 PM