Philips DVP620VR/78 Operating manual

There are many ways to connect your new DVD/VCR to your Television and other equipment.This Quick-Use
Guide shows the easiest, most common connection.
Higher quality connections are explained in the accompanying owner’s manual and will provide better sound or
picture if your TV and/or audio system is compatible.
REAR OF TV
(EXAMPLE ONLY)
ANTENNA IN
RF COAXIAL CABLE
OR
IN OUT
CABLE BOX
2
3
ANTENNA or
CABLE TV SIGNAL
ANTENNA or
CABLE TV SIGNAL
1Disconnect all equipment from the power outlets. Connect the equipment to the power outlets only after you
have finished hooking up everything. Never make or change connections with equipment connected to the power outlet.
2If you do have a Cable Box (or Satellite Receiver), first connect the Cable TV (or Satellite) signal to the IN
jack on the Cable Box/Satellite Receiver. Then, use an RF coaxial cable (like the one supplied) to connect
the OUT jack of the Cable Box/Satellite Receiver to the ANT-IN jack on the DVD / VCR.
If you do not have a Cable Box, simply connect your Antenna or Cable TV signal directly to the ANT-IN jack
on the rear of the DVD / VCR.
3Connect the supplied black RF coaxial cable to the DVD / VCR’s ANT-OUT jack and to your TV’s ANTENNA
IN jack. The TV’s ANTENNA IN jack may be labelled 75-ohm,TV IN, or RF IN. Check yourTV manual for details.
4Plug the power cords of the DVD/VCR and the TV into an active power outlet.
5Turn on the TV power. Set the TV to channel 3 or 4. (If you cannot use channel 3 at your TV, you can use chan-
nel 4 instead. However, you must set the DVD/VCR’s output channel to 4. See the accompanying DVD/VCR owner’s
manual for details.)
6Press the STANDBY-ON button on the DVD/VCR or its remote to turn on the DVD/VCR. The first
time you turn on the DVD/VCR, you should complete the VCR setup. See the other side of this Quick-
Use Guide for details.
DVP620VR
-
-
DVP620VR QUG-NEW2 03/02/2004 10:52 AM Page 1

STANDBY-ON
SOURCE
POWERON
VIDEO AUDIO REW F.FWD PLAY
RECORD CHANNEL VCR
OPEN/CLOSE
DVD STOP PLA
Y
ONETOUCH RECORDING • LONG PLAY
STOP/EJECT LR
STANDBY-ON
PLAY
DVDVCR VCR/TV
OK
MENU MENU
DISC/VCR
RETURN TITLE
A-B
CLEAR/RESET SLOW
SUBTITLE ZOOM ANGLE
REPEAT REPEAT AUDIO
SEARCH MODE DISPLAY
SKIP / CH
SYSTEM
PAUSESTOP
MARKER RECORDTIMER SET
SPEED
1 2 3
7
6
5
4
890
+10
8239 300 2xxxx
0VMN04133/H9620UD*****
Quick-Use Guide (cont’d)
Quick-Use Guide (cont’d)
Playing a Disc
1With the TV and DVD /VCR on, press the DVD button to
put the DVD / VCR in the DVD mode.
Press STANDBY-ON to turn on the DVD/VCR.
2Press OPEN/CLOSE /to open the disc tray. Put a Disc in
the tray with the label facing up and the shiny side
facing down.
Press OPEN/CLOSE /again to close the disc tray.
3Playback may start automatically. If not, press PLAY B
again. If a DVD Disc menu appears, use the 1 234, ENTER,
or Number buttons to select features or start playback.
Follow the instructions in the menu.
4To stop playing a Disc, press STOP 9.
Setting Up the VCR the First Time
1Turn on the TV and set it to channel 3 or 4 or its
AUDIO/VIDEO In channel, depending on how you
connected the DVD/ VCR to a TV.
2Press VCR, then press STANDBY-ON.
The greenVCR light will appear on the front of
the DVD/ VCR. The display shown on right
will appear. This menu may mot appear if you
have already turned on DVD/VCR You may
turned on the DVD/VCR before to find the
Aufio/Video In channel of the TV. (See the owner's manual to
select a language and set up channels.)
3Press 3or 4to select English, French, or Spanish as the
language for VCR displays. Then, press 2.
4The AUTO SET UP message will appear. Press 2to set up TV
channels for the VCR. When set up is complete, the lowest
TV channel will appear on the TV.
AUTO SET UP
PUSH 2
Playable Discs
The DVD Player of the DVD/VCR will play the following Discs.
DVDs must have a Region Code of ALL regions or Region 1.
DVDs must be recorded in the NTSC Color System.
1
ALL
Recordable
ReWritable
Turn on
the TV to
channel 3.
3-4
2
1
2
LANGUAGE SELECT
2ENGLISH [ON]
FRANCAIS
ESPAÑOL
PUSH 2
4
1
3
STANDBY-ON
PLAY
DVDVCR VCR/TV
OK
MENU MENU
DISC/VCR
RETURN TITLE
A-B
CLEAR/RESET SLOW
SUBTITLE ZOOM ANGLE
REPEAT REPEAT AUDIO
SEARCH MODE DISPLAY
SKIP / CH
SYSTEM
PAUSESTOP
MARKER RECORDTIMER SET
SPEED
DVP620VR QUG-NEW2 03/02/2004 10:52 AM Page 2