Philips BT1235 User manual

>75 % recycled paper
>75 % papier recyclé
© 2021 Koninklijke Philips N.V.
All rights reserved
保留所有权利
3000.063.8551.3 (17/12/2021)
> 75% 循环再造纸
保留备用
1 2
English
Important safety information
Only use the product for its intended purpose. Read
this important information carefully before you use
the product and its batteries and accessories, and save
it for future reference. Misuse can lead to hazards
or serious injuries. Accessories supplied may vary for
dierent products.
Warning
-To charge the appliance, only use Philips IPX-4
supply unit HQ80, available separately on
www.philips.com/parts-and-accessories or via
the Consumer Care Center in your country (see the
international warranty leaet for contact details).
-Keep the appliance, the supply unit (available
separately) and the USB cable dry (Fig. 1)
-Combs and cutting units can be rinsed under the
tap if detached from the appliance.
-This appliance can be used by children aged from
8 years and above and persons with reduced
physical, sensory or mental capabilities or lack
of experience and knowledge if they have been
given supervision or instruction concerning use of
the appliance in a safe way and understand the
hazards involved. Children shall not play with the
appliance. Cleaning and user maintenance shall
not be made by children without supervision.
-Do not modify the supply unit.
-Do not use the supply unit in or near wall sockets
that contain an electric air freshener to prevent
irreparable damage to the supply unit.
-Do not use a damaged appliance. Replace
damaged parts with new Philips parts.
-Because of hygiene, only one person should use
the appliance.
-Never use compressed air, scouring pads, abrasive
cleaning agents or aggressive liquids to clean the
appliance.
-Only use original Philips accessories or
consumables.
-Charge, use and store the product at a
temperature between 5°C and 35°C.
-Keep product and batteries away from re and
do not expose them to direct sunlight or high
temperatures.
-If the product becomes abnormally hot or smelly,
changes color or if charging takes longer than
usual, stop using and charging the product and
contact Philips.
-Do not place products and their batteries in
microwave ovens or on induction cookers.
-Do not open, modify, pierce, damage or dismantle
the product or battery to prevent batteries
from heating up or releasing toxic or hazardous
substances. Do not short-circuit, overcharge or
reverse charge batteries.
-If batteries are damaged or leaking, avoid contact
with the skin or eyes. If this occurs, immediately
rinse well with water and seek medical care.
Electromagnetic elds (EMF)
This Philips appliance complies with all applicable
standards and regulations regarding exposure to
electromagnetic elds.
Support
For all product support such as frequently asked
questions, please visit www.philips.com/support.
Recycling
-This symbol means that electrical products and
batteries shall not be disposed of with normal
household waste (Fig. 2).
-Follow your country’s rules for the separate
collection of electrical products and batteries.
Removal of built-in rechargeable battery
The built-in rechargeable battery must only be
removed by a qualied professional when the
appliance is discarded. Before removing the battery,
make sure that the appliance is disconnected from the
wall socket and that the battery is completely empty.
Take any necessary safety precautions when
you handle tools to open the appliance and
when you dispose of the rechargeable battery.
When you handle batteries, make sure that
your hands, the product and the batteries are
dry.
To avoid accidental short-circuiting of batteries
after removal, do not let battery terminals
come into contact with metal objects (e.g.
coins, hairpins, rings). Do not wrap batteries in
aluminum foil. Tape battery terminals or put
batteries in a plastic bag before you discard
them.
1 Check if there are screws in the back or front of the
appliance. If so, remove them.
2 Remove the back and/or front panel of the
appliance with a screwdriver. If necessary, also
remove additional screws and/or parts until you
see the printed circuit board with the rechargeable
battery.
3 Remove the rechargeable battery.
BT1235
BT1234
BT1233
BT1232
BT1230
BT12x_3000.063.8551.3_SDFU-LEAFLET_foldedA7_BW.indd 1-3BT12x_3000.063.8551.3_SDFU-LEAFLET_foldedA7_BW.indd 1-3 21-12-21 12:1521-12-21 12:15

www.philips.com/support
1 mm 5 mm 3 mm 7 mm
BT1230
BT1232
BT1233
BT1234
BT1235
1 2 3 4 5
1 2 3
5
4
BT1235
8
hrs
2
30
min
60
min
BT1230
BT1232
BT1233
BT1234 BT1235
4
1
2
1
3
2
1
2
2
1
2 3
1
4
1
2
1
3
1
2
1
2
1
2
3
6
3 4
5
2
1
BT12x_3000.063.8551.3_SDFU-LEAFLET_foldedA7_BW.indd 4-6BT12x_3000.063.8551.3_SDFU-LEAFLET_foldedA7_BW.indd 4-6 21-12-21 12:1521-12-21 12:15