Philips Eclipce HQ4441/A User manual

Domestic Appliances and Personal Care
Mains Shaver
Published by Philips Domestic Appliances and Personal Care Printed in The Netherlands Copyright reserved Subject to modification
©
00/01
4322 277 00182
HINTS FOR REPAIRS
a.
-
-
-
-
-
-
-
-
-
-
-
b.
-
CAUTION!
WHILE CHECKING THE P.C.-BOARD REMEMBER
THAT MOST COMPONENTS AND THE MOTOR
ARE ENERGIZED BY MAINS VOLTAGE.
Disassembly
Remove shaving unit, to prevent damages
during a repair.
Remove the screws A1 (4x).
Put the shaver on the table and remove the cover
from the shaver.
Pull the connection leads out of the terminals on the
bearing block of the motor and remove the p.c.-board.
Loosen the motor clamping springs on the bearing
block with a small screwdriver.
Remove the motor.
Remove the screws A2 (2x)
Unlock the peg clamping (3x) between frame and
hair chamber.
Remove the gearwheels and trimmer drive.
To remove the trimmer, first disassemble the trimmer
slide by pushing down the locking pegs (4x ”X” in
exploded view) and move the slide slightly outwards.
Make room between trimmer and cover with a small
screwdriver (”Y” in exploded view).
Assembly
The assembly must be carried out in reverse order
of what is described under a. Disassembly.
TECHNICAL DATA
Voltage
Power consumption
Motor voltage
Power supply
Shaving heads
Comfort control
SAP coding
100-240 V 50/60Hz
Motor depending
54 V
SMPS
HQ4 - 4822 690 30468
fixed setting
HQ4441
:
:
:
:
:
:
:
Service
Service
Service
C1
100-240 V
D1 D4
4852
4853
SK1 L1
C2
MC4
R2
C3R3
16 15 14 13 12 11 10 9
12345678
IC1 R5 L2
R1
D5
R1

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
4822 441 11276
4222 036 01980
4822 690 30468
4822 404 40728
4222 036 02130
4822 122 31177
4822 267 31319
4222 036 02920
4822 522 33041
4822 404 40656
4822 441 11275
4822 522 33039
4822 361 30247
4822 492 63165
4822 362 40181
Protecting cap
Head holder
HQ4 shaving head
Retaining bracket
Housing Ph
Capacitor 470 pF
Inlet
Hairchamber
Gearwheel
Lever
Frame
Pinion
Motor
Motor clamp
Carbon brush
16
17
18
19
20
-
-
21
A
4822 492 62703
4822 690 10081
4222 036 02010
4222 036 02140
4822 321 10095
4222 036 01590
4822 321 10344
4822 479 30183
4822 502 30526
4222 036 00040
Contact spring
Trimmer
Power module
Cover
Flex EU
Flex RA
Flex USA/CDN
Cleaning brush
S.t. screw 1.8x10/T8
Pouch
HQ 4441/A
7
2
3
4
5
6
16
15
14
13
12
11
10
9
8
7
17
18
19
20
21
-
+