Philips HQT764 User manual

ServiceManual
Philips Domestic Appliances and Personal Care
Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification
Beard Trimmer
HQ-T 764
PRODUCT INFORMATION
Features :
- Contour Tracking System; comb adapts to the contours of the
face.
- Precision Zoom Lock; for precise adjustability of the comb in
9 lenghts between 1.5 mm and 18 mm.
- Beard length indication window.
- Charging indication (LED on Adapter).
- Maintenance free cutting element: no oiling required.
- Three dimensional rounded teeth at skin side for max. comfort.
TECHNICAL DATA
Power system : Rechargeable
Batteries : 1x AA NiCd
Charging period : NiCd batteries : 10 hours
Capacity : NiCd batteries : 40 minutes
4322 277 00658
01/10
Product meets the requirements regarding
interference suppression on radio andTV.
NOTES :
* In order to guarantee the longest possible working
life of the battery :
- do not charge for more than 24 hours
- do not keep the charging unit permanently
plugged in
- discharge the battery completely once a year by
letting the motor run until it stops
* If the battery is empty and the consumer wants to
trim his beard, the trimmer has to be charged for
at least 1.5 hours to have enough power for one
trim
* The appliance should be charged again, when not
used for a long period

DISASSEMBLY ADVICE + PARTS LIST HQ-T 764
to replace ON / OFF KNOB (8)
remove SCREW A
COVER (7)
Never use again a deformed housing clamp (3).
Before reassembling the battery holder, make sure
that the internal wiring is guided as shown in figure 1.
After the product has been repaired, it should
function properly and has to meet the safety
requirements as laid down and offically established at
this moment.
to replace SPRING ZOOM RING (6)
remove COMB (1)
SCREW A
COVER (7)
COMB HOLDER (4)
ZOOM RING (5)
pos description service code
1 comb 4203 035 76450
2 cutter 4203 035 76420
3 housing clamp 4203 035 76410
4 comb holder 4203 035 76400
5 zoomring 4203 035 76350
6 spring zoom ring 4203 035 71380
7 cover 4203 035 76700
8 on/off knob 4203 035 76470
9 PCB 4203 035 76510
10 battery NiCd 4822 138 10336
11 cleaning brush 4822 479 30183
12 adapter NiCd USA 4203 035 76540
adapter NiCd CND 4203 035 76530
adapter NiCd EURO 4203 035 76520
adapter NiCd UK 4203 035 76550
to replace BATTERY (10)
PCB (9)
remove COMB (1)
CUTTER (2)
HOUSING CLAMP (3)
COMBHOLDER (4)
SCREW A
COVER (7)
ZOOM RING (5)
CAP B
figure 1

EXPLODED VIEW HQ-T 764
PHI
A
11
9
8
7
10
12
1
4
6
2
3
5
B