Philips NORELCO S5000 User manual

BC
Tripleheader shaver
S5000
Tripleheader shaver

1
2
3
4
5
8
6
7
9
10
11 13
12
15
14
16 17 18

empty page before TOC

English 6
Español 34

English
6English
Contents
IMPORTANT SAFETY INSTRUCTIONS______________________ 6
Important ____________________________________________ 10
Introduction __________________________________________ 10
General description ____________________________________ 11
The display____________________________________________ 11
Charging _____________________________________________ 13
Using the appliance ____________________________________ 14
Cleaning and maintenance______________________________ 20
Storage_______________________________________________ 25
Replacement __________________________________________ 25
Accessories ___________________________________________ 28
Troubleshooting_______________________________________ 28
Assistance ____________________________________________ 30
Disposal ______________________________________________ 30
Full Two-Year Warranty ________________________________ 31
45-DAY MONEY-BACK GUARANTEE______________________ 32
IMPORTANT SAFETY
INSTRUCTIONS
When using an electric product, basic precautions should always be
followed, including the following:
Read all instructions before using this product.
DANGER
To reduce the risk of electric shock:
-Do not reach for a corded product that has fallen into water.
Unplug immediately from the power outlet.

7
English
-Keep the power cord dry.
-Do not place or store the product where it can fall or be pulled
into a tub or sink. Do not place or drop the product into water or
other liquid.
-This product does not work while it is connected to the power
outlet. Except when charging, always unplug this product from
the power outlet.
-Remove power cord from power outlet and product before
cleaning.
WARNING
To reduce the risk of burns, fire, electric shock, or injury to
persons:
-This product is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the product by a
person responsible for their safety. Children should be
supervised to ensure that they do not play with the product.
-Use this product only for its intended household use as described
in this manual. Misuse can lead to hazards or serious injuries. Do
not use attachments not recommended by Philips North America
LLC.

8English
-Never operate this product if it has a damaged power cord, if it is
not working properly, after it has been dropped or damaged, or
after the product or power cord has been dropped into water.
For assistance call 1-800-243-3050.
-Keep the power cord away from heated surfaces.
-Never drop or insert any object into any opening.
-Do not use the power cord in or near a power outlet that
contains an electric air freshener to prevent damage to the
power cord.
-Do not use product outdoors or operate where aerosol (spray)
products are being used or where oxygen is being administered.
-Always check shaving heads (guards and cutters) before using
the product. Do not use the product if cutters or guards are
damaged, as injury may occur.
-Always attach power cord to product first, then to power outlet.
To disconnect, set all controls to 'off' position. Then remove
power cord from power outlet.
-Plug power cord directly into power outlet. Do not use an
extension cord.
-Unplug power cord before plugging in or unplugging the
product.
-Only use the power cord and other accessories supplied with the
product.
-The batteries used in this product may present a fire or chemical
burn hazard if mistreated. Do not disassemble, heat above
100°C (212°F) or incinerate.
-Only use original Philips accessories or consumables. Only use
detachable power cord HQ8505.
-Charge, use and store the product at a temperature between
10°C and 35°C.

9
English
-Keep product and batteries away from fire and do not expose
them to direct sunlight or high temperatures.
-If the product becomes abnormally hot or smelly, changes color
or if charging takes longer than usual, stop using and charging
the product and contact Philips.
-Do not place products and their batteries in microwave ovens or
on induction cookers.
-Do not open, modify, pierce, damage or dismantle the product
or battery to prevent batteries from heating up or releasing toxic
or hazardous substances. Do not short-circuit, overcharge or
reverse charge batteries.
-If batteries are damaged or leaking, avoid contact with the skin
or eyes. If this occurs, immediately rinse well with water and seek
medical care.
-When you handle batteries, make sure that your hands, the
product and the batteries are dry.
-To avoid accidental short-circuiting of batteries after removal, do
not let battery terminals come into contact with metal objects
(e.g. coins, hairpins, rings). Do not wrap batteries in aluminum
foil. Tape battery terminals or put batteries in a plastic bag
before you discard them.
IMPORTANT: The power plug contains a transformer. Do not cut
off the power plug to replace it with another plug as this will cause
a hazardous condition.
SAVE THESE INSTRUCTIONS

10 English
Important
-This product is waterproof. It is suitable for use
in the bath or shower and for cleaning under
the tap. For safety reasons, the product can
therefore only be used without cord.
-Because of hygiene, only one person should
use the product.
-Do not use a damaged appliance. Replace
damaged parts with new Philips parts.
-Before cleaning and storing the product,
switch the product off and remove power cord
from power outlet and product.
-Clean the product and the attachments after
each use for optimal performance.
-Never use compressed air, scouring pads,
abrasive cleaning agents or aggressive liquids
to clean the appliance.
-Let the product and its attachments dry
completely before storing.
-Do not wrap cord around the product when
storing.
-Store cord and other accessories in a safe
location where these will not be cut or
damaged.
Introduction
Congratulations on your purchase and welcome
to Philips! To fully benefit from the support that
Philips offers, register your product at
www.philips.com/welcome.

11
English
General description
1 Protection cap
2 Precision trimmer
3 Click-on shaving unit
4 Shaving unit release button
5 On/off button
6 Cleaning reminder
7 Replacement reminder
8 Travel lock symbol
9 Unplug for use symbol
10 Battery charge indicator
11 Socket for small plug
12 Power cord
13 Small plug
14 Pouch (specific types only)
15 Length selector (specific types only)
16 Click-on beard styler attachment (specific
types only)
17 Comb for beard styler attachment (specific
types only)
18 Click-on nose trimmer attachment (specific
types only)
Note: The accessories supplied may vary for
different products. The box shows the accessories
that have been supplied with your appliance.
The display
Cleaning reminder
Clean the shaver after every use for optimal
performance (see 'Cleaning and maintenance').
When you switch off the shaver, the cleaning
reminder flashes to remind you to clean the
shaver.

12 English
Replacement reminder
For maximum shaving performance, replace the
shaving heads every year. The shaver is
equipped with a replacement reminder which
reminds you to replace the shaving heads. The
shaver beeps, the replacement reminder lights up
and the arrows flash to indicate that you have to
replace the shaving heads.
Note: After replacing the shaving heads, you can
reset the replacement reminder by pressing the
on/off button for 7 seconds. If you do not reset
the replacement reminder, the shaver resets
automatically after 9 shaves.
Travel lock
When you are going to travel, you can lock the
shaver to prevent it from accidentally turning on.
Deactivating the travel lock
1Press the on/off button for 3 seconds.
-While you deactivate the travel lock, the
travel lock symbol lights up briefly and the
shaver produces a short sound. The shaver
turns on and is now ready for use again.
’Unplug for use’ reminder
The 'unplug for use' symbol displays to remind
you to disconnect the appliance from the wall
socket and remove the small plug from the
appliance before you switch it on.

13
English
Battery charge indicator
Quick charge: When the shaver does not contain
enough energy for one shave, the battery charge
indicator flashes orange quickly. When the shaver
is plugged in and the battery charge indicator
starts flashing white slowly, the shaver contains
enough energy for one shave.
While the shaver continues to charge, the battery
charge indicator flashes white slowly until the
product is fully charged.
Battery low
When the battery is almost empty, the battery
charge indicator flashes orange.
Battery fully charged
When the battery is full, the battery charge
indicator lights up white continuously.
Note: When the battery is full, the display turns
off automatically after 30 minutes.
Charging
Charging takes approx. 1 hour.
Quick charge: After approx. 5 minutes of
charging, the battery contains enough energy for
one full shave.
Note: You cannot use the appliance while it is
charging.

14 English
Charging with the power cord
1Make sure the product is turned off.
2Insert the small plug into the appliance and
put the power cord in the power outlet.
The display of the shaver indicates that the
shaver is charging.
3After charging, remove the power cord from
the power outlet and pull the small plug out
of the appliance.
Using the appliance
Warning: Always check the appliance before
you use it. Do not use the appliance if it is
damaged, as this may cause injury. Always
replace a damaged part with one of the
original type.
Note: The appliance can only be used without
cord.
Turning the shaver on and off
-To switch on the shaver, press the on/off
button once.
-To switch off the shaver, press the on/off
button once.
After switching the shaver off, the display
lights up for a few seconds and shows the
remaining battery.

15
English
Shaving
This shaver is waterproof. It is suitable for
use in the bath or shower and for cleaning
under the tap. For safety reasons, the shaver
can therefore only be used without cord.
-For the best results on skin comfort, pre-trim
your beard if you have not shaved for 3 days
or longer.
Dry shaving
1Switch on the shaver.
2Move the shaving heads over your skin in
circular movements to catch all hairs growing
in different directions. Make sure each shaving
head is fully in contact with the skin. Exert
gentle pressure for a close, comfortable shave.
Note: Do not press too hard, as this can cause
skin irritation.
3Turn off and clean the product after each use.
Wet shaving
For a more refreshing shave, you can also use this
shaver on a wet face with shaving foam or gel.
1Apply some water to your skin.

16 English
2Apply shaving foam or gel to your skin.
3Switch on the shaver.
4Move the shaving heads over your skin in
circular movements to catch all hairs growing
in different directions. Make sure each shaving
head is fully in contact with the skin. Exert
gentle pressure for a close, comfortable shave.
Note: Rinse the shaving unit regularly to
ensure that it continues to glide smoothly over
your skin.
5Dry your face.
6Switch off and clean the shaver after each use
(see 'Cleaning and maintenance').
Note: Make sure that you rinse all shaving foam
or gel off the shaver.
Using the click-on attachments
Note: The accessories supplied may vary for
different products. The box shows the accessories
that have been supplied with your product.

17
English
Using the trimmer attachment
You can use the precision trimmer attachment to
touch up your beard, sideburns and moustache.
1Attach the trimmer to the shaver ('click').
2Switch on the appliance.
3Hold the precision trimmer perpendicular to
the skin and move it downwards while
exerting gentle pressure.
4Switch off and clean the trimmer after each
use.
Using the beard styler attachment with comb
You can use the beard styler attachment with the
comb attached to style your beard at one fixed
setting or at different length settings. You can
also use it to pre-trim any long hairs before
shaving for a more comfortable shave.
The hair length settings on the beard styler
attachment correspond to the remaining hair
length after cutting and range from 1 to 5mm.
1Twist the shaving head or other attachment to
remove it from the handle and press the beard
styler attachment onto the handle.

18 English
2Slide the comb straight into the guiding
grooves on both sides of the beard styler
attachment.
3Press the length selector and then push it to
the left or right to select the desired hair
length setting.
4Switch on the appliance.
5Move the appliance upwards while you exert
gentle pressure. Make sure the front of the
comb is in full contact with the skin.
6Switch off the appliance and clean the
attachment after use.
Using the beard styler attachment without
comb
You can use the beard styler attachment without
the comb to contour your beard, moustache,
sideburns or neckline to a length of 0.5mm.
1Pull the comb off the beard styler attachment.
Note: Grab the comb in the center to pull it off
the beard styler attachment. Do not pull at the
sides of the comb.
2Switch on the appliance.
3Hold the beard styler attachment
perpendicular to the skin and move the
appliance downwards while you exert gentle
pressure.

19
English
4Switch off the appliance and clean the
attachment after use.
Using the nose/ear trimmer attachment
You can use the nose/ear trimmer attachment to
trim your nose and/or ear hair.
Trimming nose hair
Make sure both the nose/ear trimmer
attachment and nasal passages are clean before
trimming.
1Twist the shaving head or other attachment to
remove it from the handle and press the
nose/ear hair trimmer onto the handle.
2Switch on the appliance.
3Carefully insert the trimming head into one of
your nostrils.
Do not insert the attachment more than
0.5cm into your nostrils.
4Slowly move the trimming head around inside
each nostril, making sure the side of the tip is
held firmly against the skin. This reduces the
tickling effect that can occur.
5Switch off the appliance and clean the
attachment after use.
Dried nasal mucus can block the cutting element,
preventing the appliance from switching on. If
the cutting element is blocked, clean the
attachment.
Trimming ear hair
Make sure your outer ear channels are clean and
free from wax.

20 English
1Switch on the appliance.
2Slowly move the trimming head along the rim
of the ear to remove hairs that stick out
beyond the rim.
3Carefully insert the trimming head into the
outer ear channel.
Do not insert the trimming head more than
0.5cm into your ear channel, as this could
damage the eardrum.
4Slowly turn the trimming head around to
remove all unwanted hairs from your outer ear
channel.
5Switch off the appliance and clean the
attachment after use.
Cleaning and maintenance
Cleaning the shaver
Clean the shaver after every use for optimal
performance (see 'Cleaning and maintenance').
Note: While rinsing shaving heads, water may
drip out of the base of shaver. This is a normal
occurrence. Internal electric parts are in a
waterproof compartment so the shaver will be
protected against water damage.
Caution: Always check if the water is too hot,
to prevent burning your hands.
1Switch on the shaver.