Philips HP6517/04 User manual

HP6517

2

3
1

4

HP6517
ENGLISH 6
DEUTSCH 18
 31
ESPAÑOL 45
FRANÇAIS 57
ITALIANO 69
PORTUGUÊS 81
PORTUGUÊS DO BRASIL 93
TÜRKÇE 105

6
Introduction
Congratulations on your purchase and welcome to Philips! To fully benet
from the support that Philips offers, register your product at www.philips.
com/welcome.
With your new Satinelle ICE PREMIUM you can remove unwanted hairs
quickly, easily and effectively.The combination of the ceramic epilating
system with the contour-following skin cooler and the new
sonic massaging system constitutes a revolution in epilation.Thanks to the
natural numbing effect of ice and massaging, the new Satinelle ICE
PREMIUM makes epilation more comfortable and less painful than ever.
The result is a silky-smooth skin and a hair growth reduction of up to
50%, assuming you use the appliance regularly (every 4 weeks).
The Satinelle ICE PREMIUM is suitable for all body parts and comes with
a sensitive area cap that has been specially developed for epilating
sensitive areas (underarms, bikini line).
The rapidly rotating epilating discs catch even the shortest hairs (down to
0.5 millimetre!) and pull them out by the roots.As a result, your skin stays
smooth for up to four weeks and regrowth is soft and downy.
General description (Fig. 1)
ASensitive area cap
BMassaging element
CEpilating head
DRelease button
EAppliance
FOn/off slide
GProtective cap of shaving head
HShaving head
ILeg skin cooler with pivoting cooling head
JInsulating sleeve for leg skin cooler
KAdapter
LPeeling glove
MCleaning brush
ENGLISH

Important
Read this user manual carefully before you use the appliance and save it
for future reference.
Danger
- Keep the appliance and the adapter dry.
- Do not use the appliance near or over a washbasin or bath lled with
water
- Do not use the appliance in the bath or in the shower.
- If you use the appliance in the bathroom, do not use an extension
cord.
Warning
- Check if the mains voltage indicated on the appliance corresponds to
the local mains voltage before you connect the appliance.
- Only use the appliance in combination with the adapter supplied.
- Do not use the appliance if the adapter or the appliance itself is
damaged.
- If the adapter is damaged, always have it replaced with one of the
original type in order to avoid a hazard.
- The adapter contains a transformer. Do not cut off the adapter to
replace it with another plug, as this causes a hazardous situation.
- This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety.
- Children should be supervised to ensure that they do not play with
the appliance.
Caution
- Only epilate the underarms and bikini line with the sensitive area cap
attached.
- To prevent damage and injuries, keep the running appliance away
from scalp hair, eyebrows, eyelashes, clothes, threads, cords, brushes
etc.
ENGLISH 7

- Do not use the appliance on irritated skin or skin with varicose veins,
rashes, spots, moles (with hairs) or wounds without consulting your
doctor rst. People with a reduced immune response or people who
suffer from diabetes mellitus, haemophilia or immunodeciency
should also consult their doctor rst.
- Always check the shaving head before you use the appliance. Do not
use the shaving head if the foil is damaged, as this may cause injury.
- Do not use the peeling glove immediately before or after epilation.
- The appliance contains two NiMH rechargeable batteries that may
harm the environment if not disposed of properly. See chapter
‘Environment’.
- Do not expose the appliance to temperatures lower than 5°C or
higher than 35°C.

This Philips appliance complies with all standards regarding
electromagnetic elds (EMF). If handled properly and according to the
instructions in this user manual, the appliance is safe to use based on
scientic evidence available today.
Charging
You can run the appliance directly from the mains or you can use it
without the cord when the batteries have been charged.
Charge the batteries at least 16 hours before you use the appliance for a
cordless operating time of up to 20 minutes.
Do not charge the appliance for more than 24 hours.
1 Make sure the appliance is switched off while charging.
2 Insert the appliance plug into the bottom of the appliance and put
the adapter in the wall socket.
,The charging light goes on and stays on to indicate that the
appliance is charging.
The charging light does not go out or change colour when the
appliance is fully charged.
ENGLISH8

Optimising the lifetime of the batteries
- After you have charged the appliance for the rst time, do not
recharge it between epilating or shaving sessions. Continue to use it
and only recharge it when the battery is (almost) empty.
- Discharge the batteries completely twice a year by letting the motor
run until it stops.
- If the appliance has not been used for a long time, it must be
recharged for 16 hours.
Preparing for use
Freezing the leg skin cooler
1 Put the skin cooler WITHOUT the insulating sleeve in the freezer
or freezing compartment (***) at least 4 hours before you start to
epilate. When the uid has turned completely blue, the skin cooler
is ready for use.
Make sure the outside of the skin cooler is completely dry before you
freeze it.
Tip:You can store the skin cooler in the freezer permanently.
Using the appliance
General information about epilation
- Epilation is easier just after a bath or shower. Make sure your skin is
completely dry when you start to epilate.
- When you use the appliance for the rst time, we advise you to try it
out on an area with only light hair growth.This helps you get
accustomed to the epilation process.
- To epilate hairs longer than 10mm: (Fig. 2)
1 shorten the hairs to a maximum length of 10mm with a trimmer. In
this case, you can start to epilate right away.
2 shave the hairs completely. In this case you can start to epilate after a
few days (the hairs must be at least 0.5mm long).
- Your skin may become a little red and irritated the rst few times you
use the epilator.This phenomenon is absolutely normal and quickly
ENGLISH 9

disappears. As you use the appliance more often, your skin gets used
to epilation, skin irritation decreases and regrowth becomes thinner
and softer. If the irritation has not disappeared within three days, we
advise you to consult a doctor.
- We advise you to epilate before you go to bed at night, as this allows
any skin irritation that may develop to diminish overnight.
Corded use
You can also use the appliance from the mains. However, to avoid
damage to the batteries, only use the appliance from the mains when
the batteries are empty.
1 To run the appliance from the mains when the batteries are empty,
switch off the appliance and connect it to the mains.Wait a few
seconds before you switch on the appliance.
Epilating with the leg skin cooler
Only use the leg skin cooler to epilate your legs.
Make sure your skin is clean, entirely dry and free from grease. Do not
use any cream before you start to epilate.
1 Slide the insulating sleeve onto the skin cooler. (Fig. 3)
The insulating sleeve prevents an unpleasant sensation of coldness in your
hand while you use the appliance. It also keeps the skin cooler cold as
long as possible.
Sometimes the pivoting cooling head freezes onto the skin cooler and
does not move when you take the skin cooler from the freezer.The
pivoting cooling head starts to pivot again after you have passed it over
your leg a few times.
2 Snap the appliance onto the skin cooler (Fig. 4).
3 Select the desired speed to switch on the appliance (Fig. 5).
Select speed I for areas with little hair growth and for areas where bones
are located directly beneath the skin, such as knees and ankles.
Select speed II for larger areas with stronger hair growth.
ENGLISH10

4 Stretch your skin with your free hand to make the hairs stand
upright.
5 Place the appliance perpendicularly onto the skin with the epilating
head pointing forward. Move the appliance against the direction of
hair growth at a moderate speed. (Fig. 6)
Make sure both the epilating discs and the skin cooler are in proper
contact with the skin.
Press the appliance lightly onto the skin.
6 Use the tab on the bottom end of the appliance to remove the
appliance from the skin cooler (Fig. 7).
Epilating without the leg skin cooler
If you do not want to use the skin cooler, you can also use the appliance
without it.
Epilating the underarms and bikini line
Your epilator comes with a sensitive area cap that reduces the number of
active epilating discs.This makes the appliance ideal for epilating the more
delicate areas of the body, such as the underarms and bikini line.
Note:You get the best results when the hairs are not too long (max.1cm).
Do not use the leg skin cooler to epilate your underarms and bikini
line.
1 Put the sensitive area cap on the epilating head (Fig. 8).
The sensitive area cap can only be tted onto the appliance in one way.
2 Switch on the appliance by selecting the desired speed. (Fig. 5)
We advise you to use speed II.
3 Stretch the skin with your free hand.
4 Place the appliance perpendicularly onto your skin, with the on/off
slide pointing in the direction in which you are going to move the
appliance.
ENGLISH 11

5 Move the appliance slowly over the skin, against the direction of
the hair growth.
- Epilate your bikini line as shown in the gure (Fig. 9).
- Epilate your underarms as shown in the gure (Fig. 10).
6 For a cool sensation, you can dab the area you have just epilated
with a cloth soaked in cold water.
7 Remove the sensitive area cap from the epilator after use (Fig. 11).
Shaving
You can use the shaving head to shave sensitive body parts, such as your
underarms and bikini line.With the shaving head, you obtain a smooth
result in a comfortable and gentle way.
1 Make sure the appliance is switched off.
2 Remove the skin cooler (Fig. 7).
3 Press the release button (1) and pull the epilating head off the
appliance (2) (Fig. 12).
4 Place the shaving head on the appliance and press it onto the
appliance until it snaps home (‘click’) (Fig. 13).
5 Switch on the appliance by selecting speed II.
6 Place the shaving head onto your skin and move the appliance
slowly and smoothly against the direction of hair growth. Press the
appliance lightly (Fig. 14).
Using the peeling glove
Use the peeling glove in the shower.
Regular massages with the peeling glove may help to prevent ingrown
hairs. Do not use the peeling glove immediately before or after epilation.
Cleaning and maintenance
Regular cleaning and proper maintenance ensure optimal results and a
long life for the appliance.
ENGLISH12

Never rinse the adapter or the appliance itself with water.
Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the appliance.
1 Make sure the appliance is switched off and disconnected from the
mains.
2 Remove the leg skin cooler from the appliance and slide the
insulating sleeve off the skin cooler.
3 Clean the pivoting cooling head of the leg skin cooler with the
brush supplied or with a moist cloth after each use.
Make sure the outside of the skin cooler is completely dry before
you freeze it again.
Cleaning the epilating head
Clean the epilating head after every use.
1 Make sure the appliance is switched off and disconnected from the
mains.
2 Remove the epilating head (Fig. 12).
Press the release button (1) and pull the epilating head off the appliance
(2).
3 Remove the massaging element (Fig. 15).
4 Clean all accessible parts, including the bottom of the epilating head
and the epilating discs, with the brush (Fig. 16).
5 You can also rinse the epilating head (not the appliance!) under the
tap to clean it more thoroughly (Fig. 17).
Never try to detach the epilating discs from the epilating head.
6 Reattach the massaging element to the epilating head.Then place
the epilating head on the appliance and press it until it snaps home
(‘click’) (Fig. 18).
The epilating head only ts onto the appliance in one way.
ENGLISH 13

Cleaning the shaving head
Clean the shaving head after every use.
1 Make sure the appliance is switched off and disconnected from the
mains.
2 Remove the shaving head.
3 Pull the cutter unit out of the shaving head. (Fig. 19)
4 Brush the hairs off the cutter unit and the shaving head. Make sure
that you also brush away any hairs that have collected under the
trimmers (Fig. 20).
5 You can also rinse the cutter unit and the rest of the shaving head
(not the appliance!) under the tap (Fig. 21).
6 Put the cutter unit back into the shaving head and snap the shaving
head back onto the appliance (‘click’) (Fig. 22).
Do not exert pressure on the shaving foil to avoid damage.
7 Rub a drop of sewing machine oil onto the trimmers and shaving
foil of the cutter unit twice a year.
Replacement
If you use the shaving head several times a week, replace the cutter unit
(type HP6193) after one or two years of use or if it is damaged.
Environment
- Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an ofcial collection point for
recycling. By doing this, you help to preserve the
environment (Fig. 23).
ENGLISH14

- The built-in rechargeable batteries contain substances that may
pollute the environment.Always remove the batteries before you
discard and hand in the appliance at an ofcial collection point.
Dispose of the batteries at an ofcial collection point for batteries. If
you have trouble removing the batteries, you can also take the
appliance to a Philips service centre.The staff of this centre will
remove the batteries for you and will dispose of them in an
environmentally safe way (Fig. 24).
1 Remove the adapter from the wall socket and let the appliance run
until the batteries are empty.
2 Remove the epilating head (Fig. 12).
3 Hold the appliance in your hand and open it with a
screwdriver (Fig. 25).
4 Pull the two housing halves apart with your thumbs until the snap
connections break (Fig. 26).
5 Remove all components (motor unit and the printed circuit board
unit) from the housing halves.
6 Insert a screwdriver between the plastic battery holder and the
batteries (Fig. 27).
7 Remove the batteries from the plastic battery holder and the
printed circuit board (Fig. 28).
Do not try to reassemble the appliance in order to run it from the
mains.This is dangerous (Fig. 2).
Guarantee and service
If you need service or information or if you have a problem, please visit
the Philips website at www.philips.com or contact the Philips Consumer
Care Centre in your country (you nd its phone number in the
worldwide guarantee leaet). If there is no Consumer Care Centre in
your country, go to your local Philips dealer.
ENGLISH 15

Troubleshooting
Problem Possible cause Solution
Reduced
epilating
performance.
You moved the
epilator in the
wrong direction.
Move the appliance against the
direction of hair growth.
You moistened
your skin with
water or a cream
or other skincare
product prior to
epilation.
Make sure your skin is entirely dry
and free from grease. Do not put
any cream, body milk or other
skincare product on your skin
before you start to epilate.
You moved the
appliance over
the skin too fast.
Move the appliance over the skin
at moderate speed.
The appliance
does not
work.
The socket to
which the
appliance is
connected is not
live.
Make sure the socket you use is
live. If you use a socket in a
bathroom cabinet, you may need
to switch on the light to activate
the socket.
You did not
attach the
epilating
head correctly.
Place the epilating head on the
appliance and press it onto the
appliance until it snaps home
(‘click’).
ENGLISH16

Problem Possible cause Solution
Reduced
shaving
performance.
The shaving head
is dirty. Switch off the appliance, unplug it and remove the shaving head.
Then clean the cutter unit and the
shaving head with the cleaning
brush supplied. Remove any hairs
that are stuck under the trimmers.
The cutter unit is
damaged or
worn.
Replace the cutter unit.
ENGLISH 17

18
Einführung
Herzlichen Glückwunsch zu Ihrem Kauf und willkommen bei Philips! Um
den Support von Philips optimal nutzen zu können, registrieren Sie Ihr
Produkt bitte unter www.philips.com/welcome.
Mit Ihrem neuen Epiliergerät Satinelle ICE PREMIUM werden lästige
Haare schnell, einfach und gründlich entfernt. Die Kombination des neuen
Keramik-Pinzettensystems mit dem Skin Cooler, der sich perfekt allen
Konturen anpasst, und dem Massagesystem stellt eine wahre Revolution
auf dem Gebiet der Epilation dar. Die schmerzlindernde Wirkung von Eis
und Massage macht das Epilieren mit dem neuen Satinelle ICE PREMIUM
angenehmer und schmerzfreier denn je. Das Ergebnis ist seidenglatte
Haut. Bei regelmäßiger Anwendung (alle 4 Wochen) reduziert sich der
Haarwuchs um bis zu 50 %.
Satinelle ICE PREMIUM eignet sich für alle Körperpartien und ist mit
einem Aufsatz ausgestattet, der speziell für die Enthaarung empndlicher
Partien (Achseln, Bikinizone) entwickelt wurde.
Die schnell rotierenden Pinzetten erfassen selbst die kürzesten Härchen
von nur einem halben Millimeter Länge und entfernen sie an der Wurzel.
Anschließend bleibt Ihre Haut bis zu 4 Wochen glatt. Die
nachwachsenden Härchen sind weich und fein.
Allgemeine Beschreibung (Abb. 1)
A Aufsatz für empndliche Körperzonen
BMassage-Element
CEpilierkopf
DEntriegelungstaste
EDas Gerät
FEin-/Ausschalter
GSchutzkappe für Ladyshave-Aufsatz
HLadyshave-Aufsatz
ISkin Cooler mit beweglichem Kopf
JIso-Hülle für Skin Cooler
KAdapter
LPeeling-Handschuh
MReinigungsbürste
DEUTSCH

Wichtig
Lesen Sie diese Bedienungsanleitung vor dem Gebrauch des Geräts
aufmerksam durch, und bewahren Sie sie für eine spätereVerwendung
auf.
Gefahr
- Gerät und Adapter dürfen nicht nass werden.
- Verwenden Sie das Gerät nicht in der Nähe von bzw. über einem mit
Wasser gefüllten Waschbecken oder einer Badewanne.
- Benutzen Sie das Gerät nicht in der Badewanne oder Dusche.
- Bei der Nutzung des Geräts im Badezimmer sollten Sie kein
Verlängerungskabel verwenden.
Warnhinweis
- Prüfen Sie, bevor Sie das Gerät anschließen, ob die Spannungsangabe
auf dem Gerät mit der örtlichen Netzspannung übereinstimmt.
- Benutzen Sie das Gerät nur mit dem mitgelieferten Adapter.
- Benutzen Sie das Gerät nicht, wenn der Adapter oder das Gerät
selbst beschädigt oder defekt ist.
- Wenn der Adapter defekt oder beschädigt ist, darf er nur durch ein
Original-Ersatzteil ausgetauscht werden, um Gefährdungen zu
vermeiden.
- Der Adapter enthält einenTransformator. Ersetzen Sie den Adapter
keinesfalls durch einen anderen Stecker. Dies kann den Benutzer
gefährden.
- Dieses Gerät ist für Benutzer (einschl. Kinder) mit eingeschränkten
physischen, sensorischen oder psychischen Fähigkeiten bzw. ohne
jegliche Erfahrung oder Vorwissen nur dann geeignet, wenn eine
angemessene Aufsicht oder ausführliche Anleitung zur Benutzung des
Geräts durch eine verantwortliche Person sichergestellt ist.
- Achten Sie darauf, dass Kinder nicht mit dem Gerät spielen.
Achtung
- Verwenden Sie zum Epilieren der Achselhöhlen und Bikinizone das
Gerät immer mit dem Aufsatz für empndliche Körperzonen.
DEUTSCH 19

- Halten Sie das eingeschaltete Gerät fern von Kopfhaar,Wimpern und
Augenbrauen sowie von Kleidung, Borsten, Fäden und Kabeln, um
Verletzungen und Beschädigungen zu vermeiden.
- Benutzen Sie das Gerät nicht bei Hautreizungen, Krampfadern,
Ausschlag, Pickeln, (behaarten) Muttermalen oder Wunden, ohne
vorher einen Arzt zu konsultieren. Gleiches gilt für Patienten mit
geschwächter Immunabwehr, Diabetes, Hämophilie und
Immuninsufzienz.
- Überprüfen Sie vor jederVerwendung des Geräts den Ladyshave-
Aufsatz. Um Verletzungen zu vermeiden, sollten Sie den Ladyshave-
Aufsatz nicht benutzen, wenn die Folie beschädigt ist.
- Benutzen Sie den Peeling-Handschuh nicht unmittelbar vor oder nach
dem Epilieren.
- Das Gerät enthält zwei auadbare NiMH-Akkus, die vorschriftsmäßig
entsorgt werden müssen, um Umweltschäden zu vermeiden.Weitere
Informationen dazu nden Sie im Kapitel ‘Umweltschutz’.
- Setzen Sie das Gerät keinenTemperaturen unter 5 °C oder über
35 °C aus.
Elektromagnetische Felder
Dieses Philips Gerät erfüllt sämtliche Normen bezüglich
elektromagnetischer Felder (EMF). Nach aktuellen wissenschaftlichen
Erkenntnissen ist das Gerät sicher im Gebrauch, sofern es ordnungsgemäß
und entsprechend den Anweisungen in dieser Bedienungsanleitung
gehandhabt wird.
Laden
Sie können das Gerät direkt am Netz betreiben oder bei vollständig
geladenen Akkus ohne Kabel benutzen.
Laden Sie die Akkus zunächst mindestens 16 Stunden lang auf, um das
Gerät für max. 20 Minuten schnurlos benutzen zu können.
Laden Sie das Gerät nicht länger als 24 Stunden.
1 Achten Sie darauf, dass das Gerät während des Auadens
ausgeschaltet ist.
DEUTSCH20