Philips Satinelle ICE HP6492 User manual

ServiceManual
Philips Domestic Appliances and Personal Care
Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification
Satinelle - ICE
HP6492/Japan
06/11
PRODUCT INFORMATION
The new Satin Ice combinates a new ceramic epilating
system with a contour following skin cooler and a
massaging system. With the shaving head you can
smoothly shave the armpits and bikini line.
Safety
- This product meets the requirements regarding
interference suppression on radio and TV.
- After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.
TECHNICAL INFORMATION
- Power Source : AC (mains)
- Voltage : 100 V - 240 V
(50 - 60 Hz)
- Motor : DC - Motor 14 V
- Power Consumption : 7,5 W
- Number of Discs : 13
- Number of catching points : 24
- RPM speed I : 2200
speed II : 2700
- Pulling actions/second
speed I : 880
speed II : 1080
DISASSEMBLY- AND RE-ASSEMBLY ADVISE
- No specific issues.
REPAIR INSTRUCTION
- This is a replacement appliance.
For this Epilator only the parts shown in the exploded view
will be supplied.
Hints for repairs:
- No specific issues.
OPTIONAL (accessories)
- No specific issues.
PACKAGING
F-box dimensions
- Width : 196 mm
- Depth : 94 mm
- Height : 235 mm
- Weight F-box : 0.65 kg
= changed

HP6492/Japan
2-4
PARTS LIST & EXPLODED VIEW
2
1
5
6
3
4
7*
Pos Service code Description
1
2
3
4
5
6
7
*
4203 035 52600
4203 035 53230
4203 035 53100
4203 035 52640
4822 479 30183
4203 035 51760
4203 035 53060
Epilation Head
Cooling Accu Legs - JPN
Cooling Accu Armpit - JPN
Protecting Sleeve
Cleaning Brush
Adapter JPN (symbolic photo)
Gearwheel 3
*For replacing the gearwheel see the instructions on the next pages.

HP6492/Japan
3-4
Remove the small gearing cover with a
small screwdriver.
Instruction for exchanging the Gearwheel 3
Here you see the opened gearing.
As you can see, the small edge from the
release knob is hampering you by removing
the damaged gearwheel.
Cut this small edge with a very sharp knife,
so that the damaged gearwheel becomes
free.

HP6492/Japan
4-4
Cutted edge.
Instruction for exchanging the Gearwheel 3
Now you are able to exchange the damaged
gearwheel.