Philips Satinelle Ice Premium HP6517 User manual

HP6517

2

3
1

4

HP6517
ENGLISH 6
DANSK 18
DEUTSCH 29
SUOMI 42
FRANÇAIS 53
ITALIANO 64
NEDERLANDS 77
NORSK 89
SVENSKA 100

6
Introduction
Congratulations on your purchase and welcome to Philips! To fully benet
from the support that Philips offers, register your product at www.philips.
com/welcome.
With your new Satinelle ICE PREMIUM you can remove unwanted hairs
quickly, easily and effectively.The combination of the ceramic epilating
system with the contour-following skin cooler and the new
sonic massaging system constitutes a revolution in epilation.Thanks to the
natural numbing effect of ice and massaging, the new Satinelle ICE
PREMIUM makes epilation more comfortable and less painful than ever.
The result is a silky-smooth skin and a hair growth reduction of up to
50%, assuming you use the appliance regularly (every 4 weeks).
The Satinelle ICE PREMIUM is suitable for all body parts and comes with
a sensitive area cap that has been specially developed for epilating
sensitive areas (underarms, bikini line).
The rapidly rotating epilating discs catch even the shortest hairs (down to
0.5 millimetre!) and pull them out by the roots. As a result, your skin stays
smooth for up to four weeks and regrowth is soft and downy.
General description (Fig. 1)
ASensitive area cap
BMassaging element
CEpilating head
DRelease button
EAppliance
FOn/off slide
GProtective cap of shaving head
HShaving head
ILeg skin cooler with pivoting cooling head
JInsulating sleeve for leg skin cooler
KAdapter
LPeeling glove
MCleaning brush
ENGLISH

Important
Read this user manual carefully before you use the appliance and save it
for future reference.
Danger
- Keep the appliance and the adapter dry.
- Do not use the appliance near or over a washbasin or bath lled with
water
- Do not use the appliance in the bath or in the shower.
- If you use the appliance in the bathroom, do not use an extension
cord.
Warning
- Check if the mains voltage indicated on the appliance corresponds to
the local mains voltage before you connect the appliance.
- Only use the appliance in combination with the adapter supplied.
- Do not use the appliance if the adapter or the appliance itself is
damaged.
- If the adapter is damaged, always have it replaced with one of the
original type in order to avoid a hazard.
- The adapter contains a transformer. Do not cut off the adapter to
replace it with another plug, as this causes a hazardous situation.
- This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety.
- Children should be supervised to ensure that they do not play with
the appliance.
Caution
- Only epilate the underarms and bikini line with the sensitive area cap
attached.
- To prevent damage and injuries, keep the running appliance away
from scalp hair, eyebrows, eyelashes, clothes, threads, cords, brushes
etc.
ENGLISH 7

- Do not use the appliance on irritated skin or skin with varicose veins,
rashes, spots, moles (with hairs) or wounds without consulting your
doctor rst. People with a reduced immune response or people who
suffer from diabetes mellitus, haemophilia or immunodeciency
should also consult their doctor rst.
- Always check the shaving head before you use the appliance. Do not
use the shaving head if the foil is damaged, as this may cause injury.
- Do not use the peeling glove immediately before or after epilation.
- The appliance contains two NiMH rechargeable batteries that may
harm the environment if not disposed of properly. See chapter
‘Environment’.
- Do not expose the appliance to temperatures lower than 5°C or
higher than 35°C.
Electromagnetic elds (EMF)
This Philips appliance complies with all standards regarding
electromagnetic elds (EMF). If handled properly and according to the
instructions in this user manual, the appliance is safe to use based on
scientic evidence available today.
Charging
You can run the appliance directly from the mains or you can use it
without the cord when the batteries have been charged.
Charge the batteries at least 16 hours before you use the appliance for a
cordless operating time of up to 20 minutes.
Do not charge the appliance for more than 24 hours.
1 Make sure the appliance is switched off while charging.
2 Insert the appliance plug into the bottom of the appliance and put
the adapter in the wall socket.
,The charging light goes on and stays on to indicate that the
appliance is charging.
The charging light does not go out or change colour when the
appliance is fully charged.
ENGLISH8

Optimising the lifetime of the batteries
- After you have charged the appliance for the rst time, do not
recharge it between epilating or shaving sessions. Continue to use it
and only recharge it when the battery is (almost) empty.
- Discharge the batteries completely twice a year by letting the motor
run until it stops.
- If the appliance has not been used for a long time, it must be
recharged for 16 hours.
Preparing for use
Freezing the leg skin cooler
1 Put the skin cooler WITHOUT the insulating sleeve in the freezer
or freezing compartment (***) at least 4 hours before you start to
epilate. When the uid has turned completely blue, the skin cooler
is ready for use.
Make sure the outside of the skin cooler is completely dry before you
freeze it.
Tip:You can store the skin cooler in the freezer permanently.
Using the appliance
General information about epilation
- Epilation is easier just after a bath or shower. Make sure your skin is
completely dry when you start to epilate.
- When you use the appliance for the rst time, we advise you to try it
out on an area with only light hair growth.This helps you get
accustomed to the epilation process.
- To epilate hairs longer than 10mm: (Fig. 2)
1 shorten the hairs to a maximum length of 10mm with a trimmer. In
this case, you can start to epilate right away.
2 shave the hairs completely. In this case you can start to epilate after a
few days (the hairs must be at least 0.5mm long).
- Your skin may become a little red and irritated the rst few times you
use the epilator.This phenomenon is absolutely normal and quickly
ENGLISH 9

disappears. As you use the appliance more often, your skin gets used
to epilation, skin irritation decreases and regrowth becomes thinner
and softer. If the irritation has not disappeared within three days, we
advise you to consult a doctor.
- We advise you to epilate before you go to bed at night, as this allows
any skin irritation that may develop to diminish overnight.
Corded use
You can also use the appliance from the mains. However, to avoid
damage to the batteries, only use the appliance from the mains when
the batteries are empty.
1 To run the appliance from the mains when the batteries are empty,
switch off the appliance and connect it to the mains.Wait a few
seconds before you switch on the appliance.
Epilating with the leg skin cooler
Only use the leg skin cooler to epilate your legs.
Make sure your skin is clean, entirely dry and free from grease. Do not
use any cream before you start to epilate.
1 Slide the insulating sleeve onto the skin cooler. (Fig. 3)
The insulating sleeve prevents an unpleasant sensation of coldness in your
hand while you use the appliance. It also keeps the skin cooler cold as
long as possible.
Sometimes the pivoting cooling head freezes onto the skin cooler and
does not move when you take the skin cooler from the freezer.The
pivoting cooling head starts to pivot again after you have passed it over
your leg a few times.
2 Snap the appliance onto the skin cooler (Fig. 4).
3 Select the desired speed to switch on the appliance (Fig. 5).
Select speed I for areas with little hair growth and for areas where bones
are located directly beneath the skin, such as knees and ankles.
Select speed II for larger areas with stronger hair growth.
ENGLISH10

4 Stretch your skin with your free hand to make the hairs stand
upright.
5 Place the appliance perpendicularly onto the skin with the epilating
head pointing forward. Move the appliance against the direction of
hair growth at a moderate speed. (Fig. 6)
Make sure both the epilating discs and the skin cooler are in proper
contact with the skin.
Press the appliance lightly onto the skin.
6 Use the tab on the bottom end of the appliance to remove the
appliance from the skin cooler (Fig. 7).
Epilating without the leg skin cooler
If you do not want to use the skin cooler, you can also use the appliance
without it.
Epilating the underarms and bikini line
Your epilator comes with a sensitive area cap that reduces the number of
active epilating discs.This makes the appliance ideal for epilating the more
delicate areas of the body, such as the underarms and bikini line.
Note:You get the best results when the hairs are not too long (max.1cm).
Do not use the leg skin cooler to epilate your underarms and bikini
line.
1 Put the sensitive area cap on the epilating head (Fig. 8).
The sensitive area cap can only be tted onto the appliance in one way.
2 Switch on the appliance by selecting the desired speed. (Fig. 5)
We advise you to use speed II.
3 Stretch the skin with your free hand.
4 Place the appliance perpendicularly onto your skin, with the on/off
slide pointing in the direction in which you are going to move the
appliance.
ENGLISH 11

5 Move the appliance slowly over the skin, against the direction of
the hair growth.
- Epilate your bikini line as shown in the gure (Fig. 9).
- Epilate your underarms as shown in the gure (Fig. 10).
6 For a cool sensation, you can dab the area you have just epilated
with a cloth soaked in cold water.
7 Remove the sensitive area cap from the epilator after use (Fig. 11).
Shaving
You can use the shaving head to shave sensitive body parts, such as your
underarms and bikini line.With the shaving head, you obtain a smooth
result in a comfortable and gentle way.
1 Make sure the appliance is switched off.
2 Remove the skin cooler (Fig. 7).
3 Press the release button (1) and pull the epilating head off the
appliance (2) (Fig. 12).
4 Place the shaving head on the appliance and press it onto the
appliance until it snaps home (‘click’) (Fig. 13).
5 Switch on the appliance by selecting speed II.
6 Place the shaving head onto your skin and move the appliance
slowly and smoothly against the direction of hair growth. Press the
appliance lightly (Fig. 14).
Using the peeling glove
Use the peeling glove in the shower.
Regular massages with the peeling glove may help to prevent ingrown
hairs. Do not use the peeling glove immediately before or after epilation.
Cleaning and maintenance
Regular cleaning and proper maintenance ensure optimal results and a
long life for the appliance.
ENGLISH12

Never rinse the adapter or the appliance itself with water.
Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the appliance.
1 Make sure the appliance is switched off and disconnected from the
mains.
2 Remove the leg skin cooler from the appliance and slide the
insulating sleeve off the skin cooler.
3 Clean the pivoting cooling head of the leg skin cooler with the
brush supplied or with a moist cloth after each use.
Make sure the outside of the skin cooler is completely dry before
you freeze it again.
Cleaning the epilating head
Clean the epilating head after every use.
1 Make sure the appliance is switched off and disconnected from the
mains.
2 Remove the epilating head (Fig. 12).
Press the release button (1) and pull the epilating head off the appliance
(2).
3 Remove the massaging element (Fig. 15).
4 Clean all accessible parts, including the bottom of the epilating head
and the epilating discs, with the brush (Fig. 16).
5 You can also rinse the epilating head (not the appliance!) under the
tap to clean it more thoroughly (Fig. 17).
Never try to detach the epilating discs from the epilating head.
6 Reattach the massaging element to the epilating head.Then place
the epilating head on the appliance and press it until it snaps home
(‘click’) (Fig. 18).
The epilating head only ts onto the appliance in one way.
ENGLISH 13

Cleaning the shaving head
Clean the shaving head after every use.
1 Make sure the appliance is switched off and disconnected from the
mains.
2 Remove the shaving head.
3 Pull the cutter unit out of the shaving head. (Fig. 19)
4 Brush the hairs off the cutter unit and the shaving head. Make sure
that you also brush away any hairs that have collected under the
trimmers (Fig. 20).
5 You can also rinse the cutter unit and the rest of the shaving head
(not the appliance!) under the tap (Fig. 21).
6 Put the cutter unit back into the shaving head and snap the shaving
head back onto the appliance (‘click’) (Fig. 22).
Do not exert pressure on the shaving foil to avoid damage.
7 Rub a drop of sewing machine oil onto the trimmers and shaving
foil of the cutter unit twice a year.
Replacement
If you use the shaving head several times a week, replace the cutter unit
(type HP6193) after one or two years of use or if it is damaged.
Environment
- Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an ofcial collection point for
recycling. By doing this, you help to preserve the
environment (Fig. 23).
ENGLISH14

- The built-in rechargeable batteries contain substances that may
pollute the environment. Always remove the batteries before you
discard and hand in the appliance at an ofcial collection point.
Dispose of the batteries at an ofcial collection point for batteries. If
you have trouble removing the batteries, you can also take the
appliance to a Philips service centre.The staff of this centre will
remove the batteries for you and will dispose of them in an
environmentally safe way (Fig. 24).
1 Remove the adapter from the wall socket and let the appliance run
until the batteries are empty.
2 Remove the epilating head (Fig. 12).
3 Hold the appliance in your hand and open it with a
screwdriver (Fig. 25).
4 Pull the two housing halves apart with your thumbs until the snap
connections break (Fig. 26).
5 Remove all components (motor unit and the printed circuit board
unit) from the housing halves.
6 Insert a screwdriver between the plastic battery holder and the
batteries (Fig. 27).
7 Remove the batteries from the plastic battery holder and the
printed circuit board (Fig. 28).
Do not try to reassemble the appliance in order to run it from the
mains.This is dangerous (Fig. 2).
Guarantee and service
If you need service or information or if you have a problem, please visit
the Philips website at www.philips.com or contact the Philips Consumer
Care Centre in your country (you nd its phone number in the
worldwide guarantee leaet). If there is no Consumer Care Centre in
your country, go to your local Philips dealer.
ENGLISH 15

Troubleshooting
Problem Possible cause Solution
Reduced
epilating
performance.
You moved the
epilator in the
wrong direction.
Move the appliance against the
direction of hair growth.
You moistened
your skin with
water or a cream
or other skincare
product prior to
epilation.
Make sure your skin is entirely dry
and free from grease. Do not put
any cream, body milk or other
skincare product on your skin
before you start to epilate.
You moved the
appliance over
the skin too fast.
Move the appliance over the skin
at moderate speed.
The appliance
does not
work.
The socket to
which the
appliance is
connected is not
live.
Make sure the socket you use is
live. If you use a socket in a
bathroom cabinet, you may need
to switch on the light to activate
the socket.
You did not
attach the
epilating
head correctly.
Place the epilating head on the
appliance and press it onto the
appliance until it snaps home
(‘click’).
ENGLISH16

Problem Possible cause Solution
Reduced
shaving
performance.
The shaving head
is dirty. Switch off the appliance, unplug it and remove the shaving head.
Then clean the cutter unit and the
shaving head with the cleaning
brush supplied. Remove any hairs
that are stuck under the trimmers.
The cutter unit is
damaged or
worn.
Replace the cutter unit.
ENGLISH 17

18
Introduktion
Tillykke med dit køb og velkommen til Philips! For at få fuldt udbytte af
den support, Philips tilbyder, skal du registrere dit produkt på www.philips.
com/welcome.
Med din nye Satinelle ICE PREMIUM kan du hurtigt og effektivt fjerne
uønsket hårvækst. Kombinationen af det nye keramiske epileringssystem
med kølende, konturfølgende iselement og massagesystem udgør en
revolution inden for epilering. Takket være isens naturligt bedøvende
effekt og massagen, bliver epilering med den nye Satinelle ICE PREMIUM
mere behagelig og mindre smertefuld end nogensinde. Resultatet er
silkeblød hud og op til 50% nedsat hårvækst, forudsat at du anvender
apparatet regelmæssigt (hver 4. uge).
Satinelle ICE PREMIUM er velegnet til alle kropszoner og leveres med en
præcisionskappe til sensitive områder, der er specielt udviklet til at fjerne
hår på følsomme områder (armhuler, bikinilinje)
De hurtigt roterende pincetskiver fanger selv de korteste hår (ned til 0,5
mm!) og trækker dem ud med rod. Huden forbliver glat og blød i op til 4
uger, og den nye hårvækst er blød og dunet.
Generel beskrivelse (g. 1)
A Præcisionskappe til sensitive områder
BMassageelement
CEpilatorhoved
DUdløserknap
EApparat
FOn/off-skydekontakt
G Beskyttelsesdæksel til shaverhoved
HShaverhoved
IIselement til ben med vipbart hoved
JIsolerende kappe til iselement til ben
KAdapter
LEksfolieringshandske
MRensebørste
DANSK

Vigtigt
Læs denne brugsvejledning omhyggeligt igennem, inden apparatet tages i
brug, og gem den til eventuelt senere brug.
Fare
- Både apparat og adapter skal holdes tørre.
- Brug ikke apparatet nær eller over en håndvask eller et badekar med
vand
- Brug ikke apparatet i badet eller under bruseren.
- Hvis du bruger apparatet på badeværelset, må du ikke bruge en
forlængerledning.
Advarsel
- Før apparatet tilsluttes, kontrolleres det, om den angivne netspænding
på apparatet svarer til den lokale netspænding.
- Brug kun apparatet sammen med den medfølgende adapter.
- Brug ikke apparatet, hvis adapteren eller selve apparatet er beskadiget.
- Hvis adapteren beskadiges, skal den altid udskiftes med en original
adapter af samme type for at undgå enhver risiko.
- Adapteren indeholder en transformer og må ikke klippes af og
udskiftes med et andet stik, da dette kan være meget risikabelt.
- Dette apparat er ikke beregnet til at blive brugt af personer
(herunder børn) med nedsatte fysiske og mentale evner, nedsat
følesans eller manglende erfaring og viden, medmindre de er blevet
vejledt eller instrueret i apparatets anvendelse af en person, der er
ansvarlig for deres sikkerhed.
- Apparatet bør holdes uden for børns rækkevidde for at sikre, at de
ikke kan komme til at lege med det.
Forsigtig
- Armhuler og bikinilinje må kun epileres med påsat præcisionskappe.
- For at undgå skader og uheld skal apparatet altid holdes i sikker
afstand fra hovedhår, øjenbryn, øjenvipper, tøj, snore, ledninger, børster
o.lign., når det er tændt.
- Brug ikke apparatet på irriteret hud eller hud med åreknuder, udslæt,
knopper, modermærker (med hår) eller sår uden at konsultere din
læge. Personer med svækket immunforsvar eller personer, der lider af
DANSK 19

diabetes, hæmoli eller nedsat immunforsvar, skal altid først konsultere
lægen.
- Kontrollér altid skærhovedet, før du bruger apparatet. Brug ikke
skærhovedet, hvis folien er beskadiget, da du kan risikere at komme til
skade.
- Eksfolieringshandsken bør ikke anvendes umiddelbart før eller efter
epilering.
- Apparatet indeholder to genopladelige NiMH-batterier, som kan være
skadelige for miljøet, hvis de ikke bortskaffes på korrekt vis. Se
afsnittet “Miljøhensyn”.
- Udsæt ikke apparatet for temperaturer under 5°C eller over 35°C.
Elektromagnetiske felter (EMF)
Dette Philips-apparat overholder alle standarder for elektromagnetiske
felter (EMF). Ved korrekt anvendelse i overensstemmelse med
instruktionerne i denne brugsvejleding, er apparatet sikkert at anvende,
ifølge den videnskabelige viden, der er tilgængelig i dag.
Opladning
Apparatet kan både anvendes via lysnettet eller uden ledning, når
batterierne er opladede.
Batterierne skal oplades i mindst 16 timer, hvilket giver en ledningsfri
brugstid på op til 20 minutter.
Oplad aldrig apparatet i mere end 24 timer i træk.
1 Apparatet skal være slukket under opladning.
2 Sæt apparatstikket i kontakten i bunden af apparatet, og slut
adapteren til lysnettet.
,Opladeindikatoren lyser for at vise, at apparatet oplades.
Opladeindikatoren slukker ikke og skifter ikke farve, når apparatet er
fuldt opladet.
DANSK20