Philips 32PFL3605H/12 User manual

EN User Manual
Register your product and get support at
www.philips.com/welcome
32PFL3605H/12
42PFL3605H/12
47PFL3605H/12

Österreich 0800 180 016
België/Belgique 80080190
България 00800 11 544 24
Hrvatska 01 6403 776 Lokalni poziv
Česká republika 800142840 Bezplatný hovor
Danmark 3525 8759 Lokalt opkald
Estonia 6008600 kohalik kõne tariifi
Suomi 09 2311 3415 paikallispuhelu
France 0805 025 510 numéro sans frais
Deutschland 0800 000 7520 gebührenfreier Anruf
Ελλάδα 0 0800 3122 1280 Κλήση χωρίς χρέωση
Magyarország 0680018189 Ingyenes hívás
Hrvatska 0800 222778 free
Ireland 01 601 1777
Italia 800 088774 NumeroVerde
Қазақстан [phone] local
Latvia 52737691 local
Lithuania 67228896 local
Luxemburg/Luxembourg 40 6661 5644 Ortsgespräch/Appel local
Nederland 0800 0230076 Gratis nummer
Norge 22 70 81 11 Lokalsamtale
Polska 00800-311-13-18 Pozosta?e produkty RTV oraz AGD
Portugal 800 780 903 Chamada Grátis
România 0800-894910
0318107125
Apel gratuit
Apel local
Россия [phone] 0.15 USD/minute
Србија [phone] Lokalni poziv
Slovensko 0800 004537 Bezplatný hovor
Slovenija 00386 12 80 95 00 lokalni klic
España 900 800 655 Teléfono local gratuito solamente para
clientes en España
Sverige 08 5792 9100 Lokalsamtal
Suisse/Schweiz/Svizzera 0800 002 050 Schweizer Festnetztarif/ Tarif réseau fixe
France
Türkiye 0800 261 3302 Şehiriçi arama
United Kingdom General No: 0800 331 6015
General National Rate No:
0870 911 0036
free
National rate
Україна 0-800-500-697
www.philips.com/support
Model
Serial
This information is correct at the time of press. For updated information, see www.philips.com/support.

1
6 Install channels 27
Automatically install channels 27
Manually install channels 28
Rename channels 29
Rearrange channels 29
Test digital reception 29
7 Connect devices 30
Back connector 30
Side connector 32
Connect a computer 33
Use a Conditional Access Module 34
Use Philips EasyLink 34
Use a Kensington lock 35
8 Product information 36
Supported display resolutions 36
Multimedia
36
Tuner / Reception / Transmission 36
Remote control 36
Power 36
Supported TV mounts 37
Product specification 37
9 Troubleshooting 38
General TV issues 38
TV channel issues 38
Picture issues 39
Sound issues 39
HDMI connection issues 39
Computer connection issues 40
Contact us 40
10 Index 41
Contents
1 Notice 2
2 Important 4
3 Your TV 7
Side controls and indicators 7
Remote control 7
4 Use your TV 9
Switch yourTV on / off or to standby 9
Switch channels 9
Watch connected devices 10
Adjust TV volume 10
Use teletext 10
5 Use more of your TV 11
Access TV menus 11
Rename devices from the home menu 11
Remove devices from the home menu 11
Change picture and sound settings 12
Use the universal access menu 15
Use advanced teletext features 15
Create and use list of favourite channels 16
Use the Electronic Programme Guide 17
Use the TV clock 18
Use timers 19
Use TV locks 20
Use subtitles 21
View photos and play music from a
USB storage device 22
Listen to digital radio channels 24
Update the TV software 24
Change TV preferences 25
Access decoder channel 26
Start a TV demo 26
Reset the TV to factory settings 26
English
EN

2
Pixel characteristics
This LCD product has a high number of
colour pixels.Although it has effective pixels of
99.999% or more, black dots or bright points of
light (red, green or blue) may appear constantly
on the screen.This is a structural property of
the display (within common industry standards)
and is not a malfunction.
Compliance with EMF
Koninklijke Philips Electronics N.V. manufactures
and sells many products targeted at consumers
which, like any electronic apparatus, in
general have the ability to emit and receive
electromagnetic signals.
One of Philips’ leading Business Principles is to
take all necessary health and safety measures
for our products, to comply with all applicable
legal requirements and to stay well within
the EMF standards applicable at the time of
producing the products.
Philips is committed to develop, produce and
market products that cause no adverse health
effects. Philips confirms that if its products are
handled properly for their intended use, they
are safe to use according to scientific evidence
available today.
Philips plays an active role in the development
of international EMF and safety standards,
enabling Philips to anticipate further
developments in standardisation for early
integration in its products.
1 Notice
2010 © Koninklijke Philips Electronics N.V. All
rights reserved.
Specifications are subject to change without
notice.Trademarks are the property of
Koninklijke Philips Electronics N.V or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
The material in this manual is believed
adequate for the intended use of the system.
If the product, or its individual modules or
procedures, are used for purposes other than
those specified herein, confirmation of their
validity and suitability must be obtained. Philips
warrants that the material itself does not
infringe any United States patents. No further
warranty is expressed or implied.
Warranty
Risk of injury, damage to TV or void of•
warranty! Never attempt to repair the TV
yourself.
Use the TV and accessories only as•
intended by the manufacturer.
The caution sign printed on the back of•
the TV indicates risk of electric shock.
Never remove the TV cover. Always
contact Philips Customer Support for
service or repairs.
Any operation expressly prohibited in•
this manual, or any adjustments and
assembly procedures not recommended
or authorised in this manual shall void the
warranty.
EN

3
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
All other registered and unregistered
trademarks are the property of their respective
owners.
Mains fuse (UK only)
This TV is fitted with an approved moulded
plug. Should it become necessary to replace
the mains fuse, this must be replaced with a
fuse of the same value as indicated on the plug
(example 10A).
1Remove fuse cover and fuse.
2The replacement fuse must comply with
BS 1362 and have the ASTA approval
mark. If the fuse is lost, contact your
dealer in order to verify the correct type.
3Refit the fuse cover.
In order to maintain conformity to the EMC
directive, the mains plug on this product must
not be detached from the mains cord cable.
Copyright
®Kensington and Micro Saver are registered US
trademarks of ACCO World corporation with
issued registrations and pending applications in
other countries throughout the world.
Manufactured under licence from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
Note
Available in selected models only•
English
EN

4
When stand mounting the TV, use only•
the supplied stand. Secure the stand to
the TV tightly. Place the TV on a flat, level
surface that can support the combined
weight of the TV and the stand.
When wall mounting the TV, use only a•
wall mount that can support the weight of
the TV. Secure the wall mount to a wall
that can support the combined weight of
the TV and wall mount. Koninklijke Philips
Electronics N.V. bears no responsibility
for improper wall mounting that result in
accident, injury or damage.
Risk of injury to children!
Follow these precautions to prevent the
TV from toppling over and causing injury to
children:
Never place the TV on a surface covered•
by a cloth or other material that can be
pulled away.
Ensure that no part of the TV hangs over•
the edge of the surface.
Never place the TV on tall furniture (such•
as a bookcase) without anchoring both
the furniture and TV to the wall or a
suitable support.
Educate children about the dangers of•
climbing on furniture to reach the TV.
Risk of overheating!
Never install the TV in a confined space.•
Always leave a space of at least 4 inches
or 10 cm around the TV for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the TV.
Risk of damage to the TV!
Before you connect the TV to the power•
outlet, ensure that the power voltage
matches the value printed on the back
of the TV. Never connect the TV to the
power outlet if the voltage is different.
Risk of injury, fire or power cord damage!
Never place the TV or any objects on the•
power cord.
To disconnect the TV power cord easily•
from the power outlet, ensure that you
have full access to the power cord at all
times.
2 Important
Read and understand all instructions before you
use yourTV. If damage is caused by failure to
follow instructions, the warranty does not apply.
Safety
Risk of electric shock or fire!
Never expose the TV to rain or water.•
Never place liquid containers, such as
vases, near the TV. If liquids are spilt on
or into the TV, disconnect the TV from
the power outlet immediately. Contact
Philips Consumer Care to have the TV
checked before use.
Never place the TV, remote control or•
batteries near naked flames or other heat
sources, including direct sunlight.
To prevent the spread of fire, keep
candles or other flames away from the
TV, remote control and batteries at all
times.
Never insert objects into the ventilation•
slots or other openings on the TV.
When the TV is swivelled ensure that•
no strain is exerted on the power cord.
Strain on the power cord can loosen
connections and cause arcing.
Risk of short circuit or fire!
Never expose the remote control or•
batteries to rain, water or excessive heat.
Avoid force coming onto power plugs.•
Loose power plugs can cause arcing or
fire.
Risk of injury or damage to the TV!
Two people are required to lift and carry•
a TV that weighs more than 25 kg.
EN

5
Disposal of your old product and
batteries
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol
is attached to a product it means that the
product is covered by the European Directive
2002/96/EC. Please inform yourself about the
local separate collection system for electrical
and electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for
the environment and human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.
Please inform yourself about the local rules
on separate collection of batteries because
correct disposal helps to prevent negative
consequences for the environmental and
human health.
When you disconnect the power cord,•
always pull the plug, never the cable.
Disconnect the TV from the power•
outlet and antenna before lightning
storms. During lightning storms, never
touch any part of the TV, power cord or
antenna cable.
Risk of hearing damage!
Avoid using earphones or headphones at•
high volumes or for prolonged periods of
time.
Low temperatures
If the TV is transported in temperatures•
below 5°C, unpack the TV and wait
until the TV temperature matches room
temperature before connecting the TV to
the power outlet.
Screen care
Avoid stationary images as much as•
possible. Stationary images are images
that remain on-screen for extended
periods of time. Examples include:
on-screen menus, black bars and time
displays. If you must use stationary
images, reduce screen contrast and
brightness to avoid screen damage.
Unplug the TV before cleaning.•
Clean the TV and frame with a soft,•
damp cloth. Never use substances such as
alcohol, chemicals or household cleaners
on the TV.
Risk of damage to the TV screen! Never•
touch, push, rub or strike the screen with
any object.
To avoid deformations and colour fading,•
wipe off water drops as soon as possible.
English
EN

6
• Low standby power consumption
The class-leading and highly advanced
power circuitry brings down the power
consumption of the TV to an extremely
low level, without losing out on the
constant standby functionality.
Power management
(Available in selected models only)
The advanced power management of this TV
ensures the most efficient use of its energy.
You can check how your personal TV settings,
the level of brightness in current onscreen
pictures and the surrounding light conditions
determine the relative power consumption.
End of use
To inform yourself on the correct disposal
of the TV and batteries, refer to ‘Disposal of
your old product and batteries’ in the user
manual (see ‘Disposal of your old product and
batteries’ on page 5).
Environmental efforts
High energy efficiency•
Low standby power•
Designed to facilitate recycling•
Philips continuously focuses on lowering
the environmental impact of its innovative
consumer products. We aim our efforts
towards environmental improvements
during manufacturing, reduction of harmful
substances, energy-efficient use, end-of-life
instructions and product recycling.
Thanks to our environmental effort, this TV
has been awarded the European Ecolabel –the
flower– www.ecolabel.eu
You can find detailed information on standby
energy consumption, warranty policy, spare
parts and recycling of this TV on the Philips
website for your country at www.philips.com.
This TV has features that contribute to
energy-efficient use. This TV was awarded
the European Ecolabel for its environmental
qualities.
Energy efficiency features
• Ambient light sensor (Available in
selected models only)
To save energy, the built-in Ambient
light sensor lowers the brightness of the
TV screen when the surrounding light
darkens.
• Energy saving
The energy saving setting of the TV
combines several TV settings that result
in saving energy. See the smart settings in
the setup menu.
EN

7
Remote control
1
22
4
5
7
6
10
11
12
13
14
8
9
2
3
21
18
17
16
15
20
19
3 Your TV
Congratulations on your purchase, and
welcome to Philips!To fully benefit from the
support that Philips offers, register your TV at
www.philips.com/welcome.
This section gives you an overview of
commonly used TV controls and functions.
Side controls and indicators
a+/-: Increases or decreases volume.
b(Home): Toggles the home menu on
or off.
cP/CH +/-: Switches to the next or
previous channel.
d(Power): Switches the product on
or off. The product is not powered
off completely unless it is physically
unplugged.
eStandby indicator and remote control
sensor.
5
2
1
3
4
English
EN

8
oSOUND (Smart Sound)
Launches the sound menu.
p+/- (Volume +/-)
Increases or decreases volume.
qBACK P/P (Previous channel)
Returns to a previous screen.•
Returns to the previously viewed•
channel.
rGUIDE
Switches between channel grid and
programme list.
sSUBTITLE (For RF Digital TV only)
Enables or disables subtitles.
tDEMO (Used in selected models only)
Toggles the demonstration menu on or
off.
uFORMAT
Selects a picture format.
vINCR. SURR
Enables Incredible Surround for stereo
sources. Enables spatial mode for mono
sources.
Remote control usage
When using the remote control, hold it close
to the TV and point it at the remote control
sensor. Make sure that the line-of-sight
between the remote control and TV is not
blocked by furniture, walls or other objects.
~5m
~30˚
a(Standby-On)
Switches the TV to standby if it is on.•
Switches on the TV if it is in standby.•
bMENU
Toggles the main menu on or off.
cMHEG/TELETEXT
Toggles teletext on or off.
dSOURCE
Selects connected devices.
eColour buttons
Selects tasks or options.
fAD (Audio Descriptor)
(For RF Digital TV only)
UK only: Enables audio commentary for
the visually handicapped.
gOPTIONS
Accesses options relating to the current
activity or selection.
hOK
Confirms an entry or selection and
displays the channel grid, when watching
TV.
i(Navigation buttons)
Navigates menus.
jINFO
Displays program information, when
available. If the information spans multiple
pages, press OPTIONS to go to the next
page.
k(Mute)
Mutes or restores volume.
lP +/- (Programme +/-)
Switches to the next or previous channel.
When the TV menu is on, this functions
as Page Up / Down.
m0-9 (Numeric buttons)
Selects a channel or setting.
nPICTURE (Smart picture)
Launches the picture menu.
EN

9
Switch channels
Press• P +/- on the remote control or
P/CH +/- on the side of the TV.
Enter a channel number using the•
Numeric buttons.
Press• OK to use the channel grid.
Press• BACK P/P on the remote
control to return to the previous channel.
Note
When you use a favourite list, you can only•
select those channels in the list (see ‘Select a
favourite list’ on page 16).
Switch channels with the channel grid
The channel grid allows you to view all
available channels in a grid format.
1Press OK.
The channel grid appears.»
2Press to select and preview a
channel.
3Press OK to watch the selected channel.
4 Use your TV
This section helps you perform basic TV
operations.
Switch your TV on / off or to
standby
To switch on
If the standby indicator is off, press•
(Power) at the side of the TV.
If the standby indicator is red, press•
(Standby-On) on the remote control.
To switch to standby
Press• (Standby-On) on the remote
control.
The standby indicator switches to red.»
To switch off
Press• (Power) at the side of the TV.
The standby indicator switches off.»
Tip
Though your TV consumes very little power•
when in standby, energy continues to be
consumed. When not in use for an extended
period of time, disconnect the TV power cable
from the power outlet.
Note
If you cannot locate your remote control and•
want to switch on the TV from standby, press
P/CH +/- on the side of the TV.
English
EN

10
Use teletext
1Press MHEG/TELETEXT.
The main index page appears.»
2Select a page as follows:
Press the• Numeric buttons to enter
a page number
Press• P +/- to view the next or
previous page
Press the• Colour buttons to select a
colour coded item
Press• BACK to return to a
previously viewed page
3Press MHEG/TELETEXT to exit teletext.
Note
For UK users only: Some digital TV channels•
offer dedicated digital text services (for
example, BBC1).
Watch connected devices
Note
Switch on the device before selecting it as a•
source on the TV.
Use the source button
1Press SOURCE.
The source list appears.»
2Press to select a device.
3Press OK to confirm your choice.
The TV switches to the selected»
device.
Adjust TV volume
To increase or decrease volume
Press• +/-.
To mute or unmute sound
Press• to mute the sound.
Press• again to restore the sound.
EN

11
Rename devices from the
home menu
After adding a new device to the home menu,
you can rename it to your preference.
1Press MENU.
2Press to select a device to rename.
3Press OPTIONS.
The options menu appears.»
4Press to select [Rename device], then
press OK.
A text input box appears.»
5Press to select characters.
6Press OK to confirm each character.
7Select [Done], then press OK to finish
renaming devices.
Note
The device name can be up to 16 characters•
long.
Press
• [Aa] to change an uppercase letter to a
lowercase letter and vice versa.
Remove devices from the
home menu
If a device is no longer connected to the TV,
remove it from the home menu.
1Press MENU.
2Press to select a device to remove.
3Press OPTIONS.
4Press to select [Remove device], then
press OK.
5Select [Remove], then press OK.
The selected device is removed from»
the home menu.
5 Use more of
your TV
Access TV menus
Menus help you to install channels, change
picture and sound settings and access other
features.
1Press MENU.
The menu screen appears.»
2Press to select and navigate
through one of the following menus.
• [Watch TV]: Switches back to the
aerial source if another source is
selected.
• [Add new device]: Adds new devices
to the home menu.
• [Setup]: Accesses menus to change
picture, sound and other settings.
3Press OK to confirm your choice.
4Press MENU to exit.
Tip
After selecting• [Add new device], follow the
on-screen instructions to select the correct
device and connector.
Add new device
Watch TV
Setup
English
EN

12
• [Energy saving]: Applies low-energy
settings.
• [Natural]: Applies the best picture
quality.
• [Custom]: Lists customised picture
settings.
3Press OK to confirm your choice.
The selected smart picture setting is»
applied.
Manually adjust picture settings
1Press MENU.
2Press to select [Setup] >
[Picture].
3Press to select the following
settings.
• [Smart picture]: Accesses pre-defined
smart picture settings.
• [Video contrast]: Adjusts the intensity
of video contents, keeping backlight
unchanged.
• [Contrast]: Adjusts the intensity of
backlight areas, keeping video contents
unchanged.
• [Brightness]: Adjusts the intensity and
details of dark areas.
• [Colour]: Adjusts colour saturation.
• [Hue]: Compensates for colour variations.
• [Sharpness]: Adjusts sharpness in the
image.
• [Noise reduction]: Filters and reduces
noise in an image.
• [Tint]: Adjusts the colour balance in an
image.
• [Custom tint]: Customises tint setting.
(Only available if [Tint] > [Custom] is
selected)
• [Digital Crystal Clear]: Fine-tunes each
pixel to match surrounding pixels. This
produces a brilliant, high-definition image.
• [Dynamic contrast]: Enhances
contrast. A [Medium] setting is
recommended.
Change picture and sound
settings
Change picture and sound settings to suit your
preferences.You can apply pre-defined settings
or change settings manually.
Note
When watching TV or using external devices,•
press OPTIONS then select [Picture and
sound] for quick access to picture and sound
settings.
Use settings assistant
Use the settings assistant to guide you through
the picture and sound settings.
1Press MENU.
2Press to select [Setup] > [Picture]
> [Settings assistant].
3Press OK.
The»[Settings assistant] menu appears.
Follow the on-screen instructions to
choose your preferred picture settings.
Use smart picture
Use smart picture to apply pre-defined
picture settings.
1Press PICTURE.
The»[Smart picture] menu appears.
2Press to select one of the following
settings.
• [Personal]: Applies the settings set in
[Settings assistant] menu.
• [Vivid]: Applies rich and dynamic
settings.
• [Standard]: Adjusts picture settings
to suit most environments and types
of video.
• [Cinema]: Applies settings for movie
viewing.
• [Game]: Applies settings for games.
EN

13
[Auto format]:
(Not for PC mode.)
Automatically displays the
suitable picture format. If
not, widescreen is applied.
[Super zoom]:
(Not for HD and PC
mode.) Removes the
black bars on the side of
4:3 broadcasts. There is
minimal distortion.
[4:3]: Shows the classic 4:3
format.
[Subtitle zoom]: Displays
4:3 pictures over the full
area of the screen, with
sub-titles visible. Part of
the top of the picture is
clipped off.
[Movie expand 14:9]: (Not
for HD and PC mode.)
Scales 4:3 format to 14:9.
[Movie expand 16:9]:
(Not for HD and PC
mode.) Scales 4:3 format
to 16:9.
[Wide screen]: Scales 4:3
format to 16:9.
[Unscaled]: For HD
and PC mode only,
and in selected models
only. Allows maximum
sharpness. Some
distortion may be present
due to the broadcaster’s
systems. Set your PC
resolution to wide screen
mode for best results.
• [Dynamic backlight]: Adjusts
brightness of the TV backlight to
match lighting conditions.
• [MPEG artifact reduction]:
Smoothes out transitions on digital
pictures. You can switch this feature
on or off.
• [Colour enhancement]: Makes
colours more vivid and improves
the details in bright colours. You can
switch this feature on or off.
• [PC mode]: Adjusts the picture when a
PC is connected to the TV via HDMI or
DVI.
• [Picture format]: Changes the picture
format.
• [Picture size]: Adjusts the viewing area.
(when set to maximum, you might see
noise or a rough edge of an image.)
• [Horizontal shift]: Adjusts the picture
horizontally for PC-VGA, DVI, HDMI or
YPbPr.
• [Vertical shift]: Adjusts the picture
vertically for PC-VGA, DVI, HDMI or
YPbPr.
Change picture format
1Press FORMAT.
A picture format bar appears.»
2Press to select a picture format.
The selected picture format is»
activated.
3Press OK to confirm your choice.
Summary of picture formats
The following picture settings can be
configured.
Note
Depending on the format of the picture•
source, some picture settings are not available.
English
EN

14
• [Balance]: Adjusts the balance of the right
and left speakers.
• [Audio language]: Available for digital
channels, when multiple languages are
broadcast. Lists available audio languages.
• [Dual I-II]: Selects audio languages if dual
sound broadcast is available.
• [Mono/Stereo]: Selects mono or stereo if
stereo broadcast is available.
• [TV speakers]: Turns TV speakers on or
off. (Only available if EasyLink is switched
on.)
• [Surround]: Enables spatial sound.
• [Headphone volume]: Adjusts headphone
volume.
• [Auto volume levelling]: Automatically
reduces sudden volume changes, for
example, when switching channels.
• [Delta volume]: Levels out volume
differences between channels or
connected devices. Switch to the
connected device before you change the
delta volume.
• [SPDIF OUT]: Selects the type of digital
audio output through SPDIF connector.
• [PCM]: Converts non-PCM audio
type to PCM format.
• [Multichannel]: Outputs audio to the
home theater.
Use smart sound
Use smart sound to apply pre-defined sound
settings.
1Press SOUND.
The»[Smart sound] menu appears.
2Press to select the following settings.
• [Custom]: Applies the settings that
were customised in the sound menu.
• [Standard]: Adjusts sound settings
to suit most environments and types
of audio.
• [News]: Applies settings for spoken
audio, such as news.
• [Movie]: Applies settings for movies.
3Press OK to confirm your choice.
The selected smart sound setting is»
applied.
Manually adjust sound settings
1Press MENU.
2Press to select [Setup] > [Sound].
The»[Sound] menu appears.
3Press to select the following
settings.
• [Smart sound]: Accesses pre-defined
smart sound settings.
• [Bass]: Adjusts the bass level.
• [Treble]: Adjusts the treble level.
• [Digital audio lipsync]: Enables or disables
lipsync audio output. When this is
enabled, the TV synchronises the audio
and video performance. When disabled,
you need to adjust the lipsync audio
feature on the external device that is
connected to the TV.
(Only available with SPDIF connection)
• [Volume]: Adjusts the volume.
• [Vol.vis.impaired]: Sets the mix of visually
impaired audio with regular audio. When
available, visually impaired audio includes
audio descriptions of on-screen action.
You can also enable this by pressing
AD (Audio Descriptor). (Only applicable
for the UK region.)
EN

15
Use advanced teletext
features
Access the teletext options menu
Access the teletext features through the
teletext options menu.
1Press MHEG/TELETEXT.
The teletext screen appears.»
2Press OPTIONS.
The teletext options menu appears.»
3Press to select one of the following
options.
• [Reveal]: Hides or reveals hidden
information on a page, such as
solutions to riddles or puzzles.
• [Cycle subpage]: Cycles through
subpages automatically if subpages
are available.
• [Language]: Switches to a different
language group to display a language
correctly when it uses a different
character set.
• [Freeze page]: Freezes the current
page.
• [Dual screen] / [Full Screen]: Enables
and disables dual screen teletext.
4Press to make a selection, then
press OK to confirm.
5Press BACK to exit the teletext
options menu.
Select teletext subpages
A teletext page can hold several subpages.
Subpages are displayed on a bar next to the
main page number.
1Press MHEG/TELETEXT.
The teletext screen appears.»
2Press P +/- to select a teletext page.
3Press to enter a subpage.
Use the universal access
menu
You can activate the universal access menu
during the first installation. Once enabled, you
can quickly access the visually impaired and
hearing impaired menus when watching TV or
external devices.
Tip
You can also enable the universal access•
menu by selecting [Setup] > [Installation] >
[Preferences] > [Universal access] > [On].
1When watching TV, press OPTIONS.
The TV options menu appears.»
2Select [Universal access], then press OK
or to enter.
3Press to select one of the following
options and press OK to enter.
• [Hearing impaired]: Enables or
disables hearing impaired subtitles.
• [Visually impaired]: Selects speaker,
headphone or both for
[Vol.vis.impaired] audio. Select [Off]
to disable audio descriptor. (Only
applicable to the UK region).
• [Vol.vis.impaired]: Adjusts the
volume of visually impaired audio.
Tip
Press the colour buttons on the remote•
control to enter the options.
English
EN

16
Create and use list of
favourite channels
You can create a list of your preferred TV
channels so that you can find those channels
easily.
Select a favourite list
1When watching TV, press OK to display
the channel grid.
2Press OPTIONS.
The channel options menu appears.»
3Press to select [Select list], then
press OK to enter.
The channel list options appear.»
4Select [Favourite], then press OK.
Only channels in the favourite list»
appear in the channel grid.
Note
The favourite channel grid is empty until you•
add channels into the favourite lists.
View all channels
You can exit a favourite list, and view all
installed channels.
1When watching TV, press OK.
The channel grid appears.»
2Press OPTIONS.
The channel options menu appears.»
3Press to select [Select list], then
press OK or to enter.
4Select [All], then press OK.
All channels are displayed in the»
channel grid.
Note
All favourite channels are marked by an•
asterisk when you view the channel grid.
Select T.O.P. teletext broadcasts
Table Of Pages (T.O.P.) teletext broadcasts
allow you to jump from one subject to
another without using page numbers. T.O.P.
teletext is not broadcast on all TV channels.
1Press MHEG/TELETEXT.
The teletext screen appears.»
2Press INFO.
The T.O.P. overview appears.»
3Press to select a subject.
4Press OK to view the page.
Use Teletext 2.5
Teletext 2.5 offers more colours and better
graphics than normal teletext. If Teletext 2.5
is broadcast by a channel, it is switched on by
default.
1Press MENU.
2Press to select [Setup] >
[Installation] > [Preferences] >
[Teletext 2.5].
3Press to select [On] or [Off].
4Press OK to confirm your choice.
EN

17
Use the Electronic
Programme Guide
EPG is an on-screen guide available for digital
channels. EPG allows you to:
View a list of digital programmes being•
broadcast
View upcoming programmes•
Group programmes by genre•
Set reminders when programmes start•
Set up preferred EPG channels•
Switch on EPG
1When watching TV, press GUIDE.
The EPG planner screen appears»
displaying information about the
scheduled programmes.
Note
EPG data is available only in selected countries•
and can take some time to load.
Use EPG
1When watching TV, press GUIDE.
The EPG planner screen appears.»
2Press MENU.
The program guide menu appears.»
3Press to select an option, and then
press OK to confirm.
4Press MENU to exit the EPG menu.
Note
Only the channels in the• [Preferred EPG
channels] list appear in the EPG menu.
Add a channel to a favourite list
Tip
View all channels before adding a channel to a•
favourite list.
1When watching TV, press OK.
The channel grid appears.»
2Press to select a channel to add to
a favourite list.
3Press OPTIONS.
The channel options menu appears.»
4Select [Mark as favourite], then press
OK.
The channel is added to the favourite»
list.
Note
All favourite channels are marked by an•
asterisk in the channel grid.
Remove a channel from a favourite
list
1When watching TV, press OK.
The channel grid appears.»
2Press to select a channel to
remove.
3Press OPTIONS.
4Select [Unmark as fav.], then press OK.
The channel is removed.»
English
EN

18
Use the TV clock
You can display a clock on the TV screen.The
clock displays the current time using time data
received from your TV service operator.
Set the TV clock manually
In some countries, you need to set TV clock
manually.
1Press MENU.
2Select [Setup] > [Features] > [Clock].
The»[Clock] menu appears.
3Press to enter time.
4Select [Done] to confirm.
5Press MENU to exit.
Note
If your selected country supports digital•
broadcast, the clock displays the time data
from your TV service operator as priority.
Display the TV clock
1When watching TV, press OPTIONS.
The TV option menu appears.»
2Select [Clock].
3Press OK.
Note
To disable the clock, repeat the above•
procedure.
Use the EPG options menu
Use the EPG options menu to set or clear
reminders, change day and access other useful
EPG options.
1Press GUIDE.
2Press OPTIONS.
The EPG menu appears.»
3Press to select one of the following
options.
• [Set remind] / [Clear remind]: Sets
or clears programme reminders.
• [Change day]: Sets the EPG day.
• [Show info]: Displays programme
information.
• [Search by genre]: Searches TV
programmes by genre.
• [Scheduled reminders]: Lists
programme reminders. Only
available for upcoming programmes.
• [Preferred EPG channels]: Sets
preferred EPG channels.
4Press OK to enter or activate the option.
5Press BACK to exit the EPG menu.
Tip
Press• GUIDE to switch between EPG and
channel grid.
EN