Philips BHD285 User manual

Register your product and get support at
www.philips.com.cn/welcome
BHD285
BHD286
BHD287
© 2018 Koninklijke Philips N.V.
保留所有权利
3000 027 09801
EN Important Information Leaet
ZH-CN 重要信息手册

English
Congratulations on your purchase, and welcome to Philips! To fully benet from the
support that Philips oers, register your product at www.philips.com.cn/welcome.
1 Important
Read this user manual carefully before you use the appliance and keep it for future
reference.
• WARNING: Do not use this appliance near
water.
• When the appliance is used in a bathroom,
unplug it after use since the proximity of water
presents a risk, even when the appliance is
switched o.
• WARNING: Do not use this appliance
near bathtubs, showers, basins or other
vessels containing water.
• Always unplug the appliance after use.
• If the appliance overheats, it switches o
automatically. Unplug the appliance and let it
cool down for a few minutes. Before you switch
the appliance on again, check the grilles to
make sure they are not blocked by u, hair,
etc.
• If the main cord is damaged, you must have it
replaced by Philips, a service centre authorised
by Philips or similarly qualied persons in order
to avoid a hazard.

• This appliance can be used by children
aged from 8 years and above and persons
with reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given supervision
or instruction concerning use of the appliance
in a safe way and understand the hazards
involved. Children shall not play with the
appliance. Cleaning and user maintenance
shall not be made by children without
supervision.
• For additional protection, we advise you to
install a residual current device (RCD) in the
electrical circuit that supplies the bathroom.
This RCD must have a rated residual operating
current not higher than 30mA. Ask your installer
for advice.
• Do not insert metal objects into the air grilles
to avoid electric shock.
• Never block the air grilles.
• Before you connect the appliance, ensure
that the voltage indicated on the appliance
corresponds to the local power voltage.
• Do not use the appliance for any other
purpose than described in this manual.
• Do not use the appliance on
articial hair.

• When the appliance is connected to the power,
never leave it unattended.
• Never use any accessories or parts from
other manufacturers or that Philips does
not specically recommend. If you use such
accessories or parts, your guarantee becomes
invalid.
• Do not wind the main cord round the
appliance.
• Wait until the appliance has cooled down
before you store it.
• Do not pull on the power cord after using.
Always unplug the appliance by holding the
plug.
• Do not operate the appliance with wet hands.
• Always return the appliance to a service centre
authorized by Philips for examination or repair.
Repair by unqualied people could result in an
extremely hazardous situation for the user.
• The styling nozzle could be hot to touch after
use. Highly recommend to cool down this
accessory before removing.
• Only use the scalp massager on the head but
not other parts of the body ( BHD286, BHD287
only ).

Electromagnetic elds (EMF)
This Philips appliance complies with all applicable standards and regulations regarding
exposure to electromagnetic elds.
Recycling
- Do not throw away the product with the normal household waste at the end of
its life, but hand it in at an ocial collection point for recycling. By doing this, you
help to preserve the environment.
- Follow your country’s rules for the separate collection of electrical and
electronic products. Correct disposal helps prevent negative consequences for the
environment and human health.
简体中文
感谢您的惠顾，欢迎光临飞利浦！为了您能充分享受飞利
浦提供的支持，请在 www.philips.com.cn/welcome
注册您的产品。
1 重要事项
使用产品之前，请仔细阅读本用户手册，并妥善保管以供日
后参考。
• 警告：请勿在靠近水的地方使用本产品。
• 在浴室内使用产品后需拔下插头，即使产品已关
闭，近水放置仍存在危险。
• 警告：不要在盛水的浴缸、淋浴、洗脸盆或
其他器皿附近使用本器具。
• 警告符号注释：禁止在洗澡或淋浴时使用。
• 使用后务必拔下产品的插头。

• 如果产品过热，它将自动关闭电源。拔掉产品插
头，让其冷却几分钟。再次启动产品之前，请检查
出风口，确保其未被绒毛、头发等杂物堵塞。
• 如果电源软线损坏，为了避免危险，必须由制造
商、其维修部或类似部门的专业人员更换。
• 本产品可以由 8 岁或以上年龄的儿童以及肢体不
健全、感觉或精神上有障碍或缺乏相关经验和知识
的人士使用，但前提是有人对他们使用本产品进行
监督或指导，以确保他们的安全使用，并且让他们
明白相关的危害。不得让儿童玩耍本产品。不要让
儿童在无人监督的情况下进行清洁和保养。
• 为了增加保护，建议在浴室供电的电气回路中安装
一个额定剩余工作电流不超过 30mA 的剩余电流
装置 (RCD)。详情请向 RCD 安装商咨询。
• 切勿将金属物体插入风口，
以免触电。
• 切勿阻塞电吹风风口。
• 连接产品之前，请确保产品上标示的电压与当地电
源电压相符。
• 请勿将本产品用于本手册中说明以外的任何其它用
途。
• 请勿对假发使用本产品。
• 当产品连接了电源时，切勿让其无人看管。

• 切勿使用由其它制造商生产的，或未经飞利浦特别
推荐的任何附件或部件。如果使用此类附件或部
件，您的保修将失效。
• 切勿将电源线缠绕在产品上。
• 待产品完全冷却后再存放。
• 使用后请勿拉扯电源线。拔下产品插头时，请握紧
插头。
• 切勿用湿手操作本产品。
• 产品只能送到飞利浦授权的服务中心检修。由不合
格人员进行修理可能将用户置于极度危险的境地。
• 使用过后，造型集风嘴可能会很烫。在移除集风嘴
前务必使其冷却。
• 按摩器仅可用于头部。请勿使用于身体其它部位
(仅限BHD286，BHD287)。
电磁场 (EMF)
本飞利浦产品符合所有有关暴露于电磁场的适用标准和法
规。
环保
-弃置产品时，请不要将其与一般生活垃圾堆放在一
起，应将其交给政府指定的回收中心。 这样做有利于
环保。
-遵循所在国家或地区关于电子和电器产品分类回收规定。
正确弃置产品有助于避免对环境和人类健康造成负面影响。

保留备用
出版日期：2018-07-05
ϔ৮  喟下ݖ⊓⩢䷻
ಸ  喟#)%
䷊Ⴧ⩢ࢸ 喟7_
䷊Ⴧ䶾⢴ 喟)[
䷊Ⴧ䓀ڒߌ⢴ 喟8
⩌ϔᬒ᱌  喟䄤㻮ϔ৮᱙Ҁ
ϔౝ  喟పᎬ⌞ౠ
下ݖ⊓喍ప喎ែ䉱ᰶ䭽ڙ
⊤ጯ䲆Ⴖࡧ▢ⴠ䌜"ᎏ
ڕప䶫჏᰺ߎ☚㏬喟
᱙ϔ৮ᵦᢛపᴴ(#
(#(#
ࣷ(#ݣ䕍

ϔ৮  喟下ݖ⊓⩢䷻
ಸ  喟#)%
䷊Ⴧ⩢ࢸ 喟7_
䷊Ⴧ䶾⢴ 喟)[
䷊Ⴧ䓀ڒߌ⢴ 喟8
⩌ϔᬒ᱌  喟䄤㻮ϔ৮᱙Ҁ
ϔౝ  喟పᎬ⌞ౠ
下ݖ⊓喍ప喎ែ䉱ᰶ䭽ڙ
⊤ጯ䲆Ⴖࡧ▢ⴠ䌜"ᎏ
ڕప䶫჏᰺ߎ☚㏬喟
᱙ϔ৮ᵦᢛపᴴ(#
(#(#
ࣷ(#ݣ䕍

ϔ৮  喟下ݖ⊓⩢䷻
ಸ  喟#)%
䷊Ⴧ⩢ࢸ 喟7_
䷊Ⴧ䶾⢴ 喟)[
䷊Ⴧ䓀ڒߌ⢴ 喟8
⩌ϔᬒ᱌  喟䄤㻮ϔ৮᱙Ҁ
ϔౝ  喟పᎬ⌞ౠ
下ݖ⊓喍ప喎ែ䉱ᰶ䭽ڙ
⊤ጯ䲆Ⴖࡧ▢ⴠ䌜"ᎏ
ڕప䶫჏᰺ߎ☚㏬喟
᱙ϔ৮ᵦᢛపᴴ(#
(#(#
ࣷ(#ݣ䕍

产品保用卡
保修条例：
* 在购买日期后二年内，凡经本公司特约维修站人员确认为 正
常使用情况下，因制造工艺或元器件造成之损坏，您都 将获
得免费保修服务。
*此免费服务不包括需时常更换的易耗零配件（吸尘机纸
袋， 布袋，空气清新机滤网，滤芯，活性碳，咖啡壶过滤
网）及 附件（如须刀网膜、刀头，咖啡杯，食品加工机杯/刀具
等），辅助装置，运输费及维修人员上门服务费。
*用户请保留此联。
*此证若经涂改即作废。
*此证须联同发票正本使用方为有效。
* 以下情况将不能获得免费服务
1. 使用不当引起的人为损坏，例如接入不适当电源、使用不
适 当 配 件 、不 适 当 之 安 装 、不 依 说 明 书 使 用 、错 误 使 用 或
疏忽而造 成损坏等。因运输及其他意外而造成之损坏。
非经本公司认可之维修和改装。其他因不可抗力（如自然
灾害、电压异常等）造成的损坏。
2.
一般家庭以外使用（如工业、商业用）而造成的损坏。
3.
正常使用引起的产品老化、磨损等，但不影响产品的正常
使用。
* 保修证作为在规定期限及条件之内进行免费维修的保证，
并不限制消费者的法定权利。
*飞利浦提供2年全球联保服务，在产品由飞利浦正式销售
的所有国家中，都提供保修和保修期满的维修服务。要求
保修时，您需提供发票正本，且请求保修的日期还在保修
期限之内。
保修及服务：
此产品是一件设计精良，用高品质元件制造之家用电器，在
正常使用及保养下应能发挥其优越性能。在购买日期后二
年内，若发生任何因制造工艺或元器件造成之损坏，飞利浦
中国维修服务中心将为持证用户提供免费门市维修服务，
视情况更换零件或整个产品。
无论在保期中或保期后，只要飞利浦正式行销该产品的任
何国家皆可获得维修服务。
若飞利浦在当地无行销该项产品，飞利浦同样提供维修服务，
但可能因未储备所需零件，维修时间可能较长，敬请见谅。
请联络当地飞利浦经销商，或飞利浦服务部门。
若您需洽询相关资讯，或遇困难事项时，请联络当地飞利浦
维修服务中心，或向飞利浦服务热线咨询。
中国顾客服务热线：
4008 800 008
（用 户 需 承 担 本 地 通 话 费）。
网址：
http://www.philips.com.cn
网上会员注册与产品注册：
1) 登陆 http://www.philips.com.cn/welcome
2) 点击“创建新账户”，创建您的飞利浦账号
3) 点击“注册产品”，通过产品名称或产品型号查找产品，
完成产品注册
服务须知
需要此产品的售后服务，
拨打服务热线：
4008 800 008
在维修服务过程中有任何意见，
欢迎致函飞利浦（中国）投资有限公司解决疑难。
飞利浦（中国）投资有限公司
上海市静安区灵石路718号A1幢
4222.005.0422.4
4222_005_0422_4_Guarantee Card_A5_v4.indd 1 19/01/18 14:01

产品中有害物质
的名称及含量
部件 名称
有毒有害物质
或元素
铅
（Pb）
汞
（Hg）
镉
（Cd）
六价铬
（Cr6+）
多溴联苯
（PBB）
多溴二苯醚
（PBDE）
电源
线
XO O O O O
马达 XO O O O O 塑胶 外壳
O O O O O O
离子发
生器
XO O O O O
开关 O O O O O O
发热丝 O O O O O O

本表格依据SJ/T 11364的规定编制。 O：表示该有害物质在该部件所有均质材料中的含量均在GB/T 26572规定的限量 要求以下。 X：表示该有害物质至少在该部件的某一均质材料中的含量超出GB/T 26572规定 的限量要求。
* 该表格中所显示的“有害物质”在产品正常使用情况下不会对人身和环境产生任何 伤害。
*
该表格中所显示的“有害物质”及其存在的部件向消费者和回收处理从业者提供相 关物质的存在信息，有助于产品废弃时的妥善处理。

BHD285
BHD286
BHD287
User manual
a
n
ual
user m

User manual
⩕ᝤ᝸ڹ

Congratulations on your purchase, and welcome
to Philips! To fully benet from the support
that Philips oers, register your product at
www.philips.com.cn/welcome.
々嬈⾎䕪⿆杤潎㨈庴 ᴚ柄ℏ㱌潃ᴠᵬ
⾎俣󰿌󱂍ᶑ⊽柄ℏ㱌㊶ẁ䕪㐕㇧潎嫝☎
www.philips.com.cn/welcome
ᳰ㯎⁲⾎䕪ᶍ⎧Ȥ What is
ϭ͵᭜ ?
• smart technology personalizes its drying
experience to you. It continuously senses the
temperature of your hair and adjusts the
temperature to prevent your hair from overheating.
leaves your hair moisture-rich, shiny and
healthy-looking. The light on top of the hair dryer
and on the interface lights up when is
active.
㕠俣々⵺䢷ㅦ潎ᴠ⾎⪀ℜ
᳹⭄ㆊ⊷ḹ楲Ȥ㇧䷓々⵺⊷㴏ⵜ⪄㓜
嫩㊍潎彥″庭㿓㉅ḊȤ 媏⾎
䕪䢦⊷㬚々擐仦Ȥ 㺦㰡⋴潎
䐛⌟枴杜忎䕪㇭䠠㽕⍲ Ḁᶔ屝Ȥ
Why is This Dryer Smart?
ϭ͵䔆⩢䷻᭜ᮧ㘪ಸ⮱ 喤
• The dryer automatically detects the accessory and
switches to the right mode. When the accessory is
removed, the dryer will switch to the previous mode
setting.
䐛⌟枴⋕僐↎媬ℑ攪󰵽ⵜ∟怳ⳋṂ㤇
ⷵȤㆬᳱ攪󰵽⋴潎䐛⌟枴⫬󱂎㉈僙ᴱℳ
䕪㤇ⷵ媤乔Ȥ
• automatically turns o in Manual and Scalp
mode to provide optimal drying experience.
☎ㄱ↎⍲⠚䖔㤇ⷵᳱ僐↎
⁙擓潎󰵬㊶ẁ󱂁兘䕪ⵘ⊷ḹ楲Ȥ
• When the appliance is powered on, 2x ions are
automatically dispensed continuously, so it reduces
frizz and provides additional shine.
ᶍ⎧ⷦ⌕⋴潎Ḁ僐↎ᳺ㇧䷓☖悰㐤⊲ỳ
尅䢡⨶潎ᶴ仲₵⫷㫁䮿潎󰵫䢦⊷㗚ↆ
擐ᶔȤ
1 2

13
12
11
9
8
2
3
4
5
6
7
1
10
1 Overview ắ䔝
3 4
a On/O switch
ᐭ/ڠᠶ䧛
b Mode button
὎ᐼᠶ䧛
c Heat button
⍖Ꮣ䄰㞯ᠶ䧛
d Speed button
䷻䕌䄰㞯ᠶ䧛
e indicator
ᠴ⹧▜
f Heat indicator (Manual mode only)
⍖Ꮣᠴ⹧▜喍ϲ䭽᝸ߕ὎ᐼ喎
g Speed indicator (Manual mode only)
䷻䕌ᠴ⹧▜喍ϲ䭽᝸ߕ὎ᐼ喎
h Mode Indicator
὎ᐼᠴ⹧▜
i Cool Shot button
ۤ䷻ᠶ䧛
j Hanging loop
ᠯ⣜
k Scalp massager (BHD286 and BHD287 only)
๡⯛ᠶᦖ䭱У
喍ϲ䭽 BHD286ȠBHD287喎
l Curl diuser (BHD285 and BHD287 only)
ࢤࣾព᪐䷻ୡ
喍ϲ䭽 BHD285ȠBHD287喎
m Styling nozzle
䕍ಸ䯳䷻ୡ
Mode /὎ᐼ Sense IQ
Fast 弅ⵘ Yes 㗯
Gentle 㚺ⵘ Yes 㗯
Manual ㄱ↎ No 㓆
Style 弆♱ Yes 㗯
Curl ≝⊷
(ᶫBHD285,BHD287 only) Yes 㗯
Scalp ⠚䖔
(ᶫBHD286,BHD287 only) No 㓆

2 sec.
2
1 Connect the plug to a power supply outlet and
switch on the appliance.
⫬㊸⠚廄㊋僙䐛㵶㊸ⶍ潎ⷦ⌕ᶍ⎧Ȥ
» Fast, Gentle, and Manual modes will indicate in the
mode indicator（h）momentarily. Then, it will go to
the default mode, i.e. Fast.
» 㤇ⷵ㇭䠠㽕( h)ć弅ⵘĈ潎ć㚺ⵘĈ
⍲ćㄱ↎Ĉ㤇ⷵ忣⫬ᶔ屝潎䀜⋴庫弅󱂎
㉈僙涾媊㤇ⷵ,⡨ć弅ⵘĈȤ
2 Press Mode button ( b) to change between Fast,
Gentle and Manual modes.
㇯ᳱ㤇ⷵ ㇯掔 ( b) ⋕☎弅ⵘȣ
㚺ⵘ⍲ㄱ↎㤇ⷵᴱ據廁圲󱂎㉈Ȥ
2How to Use Your Hairdryer Without
Any Accessories
ຯ҂ౕ⇎ᰶ䭱У⮱ᗲۢ
Ҭ⩕ᗕ⮱⩢䷻
Mode
὎ᐼ
Function
ߌ㘪
Fast
弅ⵘ
Dry your wet hair in a short time thanks to
its powerful performance.
󱁴ἅ⸠↘枴弅⻑弅⌟ⵘ㵥⊷Ȥ
Gentle
㚺ⵘ
Dry hair at a caring temperature with
gentle airow.
󰵬㚺⍲ᳺ廨⪂䕪㴏ⶌ⌟ⵘ⠚⊷Ȥ
Manual
ㄱ↎
Dene your desired settings by pressing
the or buttons.
㇯ᳱ ー嫩全㇯掔潎僐⪀ᴯ
枴弅ー㴏ⶌ媤乔Ȥ
5 6

3 Press the Cool Shot button ( i) for cool airow to
x your style. To turn it o, press the Cool Shot, Heat
or Mode button.
㇯ᳱ₝枴㇯掔 ( i) ⋕劝⹽₝枴䐎ᵴ
⪀♱Ȥ塧⫬⁜⁙擓潎㇯ᳱ₝枴㇯掔ȣ㴏
ⶌー㤇ⷵ㇯掔Ȥ
Note
• Cool Shot ( ) is applicable to all modes. If you
would like to change the speed in the Cool Shot
setting, we recommend that you select Manual
mode and change to Temperature 1.
∕ᘼ
• ۤ䷻὎ᐼ ( ) 䔯⩕λ᝭ᰶ䃫㒛ȡຯ
䰭ౕۤ䷻὎ᐼ䄰㞯䷻䕌喑᜾Йᐧ䃛
ᗕ䔶᠖᝸ߕ὎ᐼᎣ䔶᠖⍖Ꮣ䃫㒛 1ȡ
1 Attach the styling nozzle ( m) on the hairdryer and
the Style mode will activate automatically.
⫬弆♱斬枴┚ ( m) ⩯垫№䐛⌟枴ᳰ潎
弆♱㤇ⷵ⫬僐↎㺦㰡Ȥ
» If you attach the styling nozzle and then switch on
the dryer, you will see Fast, Gentle, Manual and Style
modes in the mode indicator momentarily. Then, it
will go to Style mode.
» ⸹⩯垫⡣弆♱枴┚ⵜⷦ⌕ᶍ⎧㓜潎
ć弅ⵘĈ潎ć㚺ⵘĈ潎ćㄱ↎Ĉ⍲
ć弆♱Ĉ㤇ⷵ㇭䠠㽕忣⫬ᶔ屝Ȥ䀜⋴
ć弆♱Ĉ㤇ⷵ⫬ⷦ⢱ⳋṂȤ
Note:
You can change to Gentle, Fast, Manual and Style
mode as desired.
∕ᘼ喟
ᗕВᵦᢛ䰭㺮ᩦᴁ᎟Ƞ䕌᎟Ƞ᝸ߕᝃ
䕍ಸ὎ᐼȡ
3 How to Style Your Hair
2 sec.
ຯ҂๡ࣾ䕍ಸ
7 8

2 Select one section of hair(not wider than 5cm)
and place the brush underneath the hair near the
roots. With the styling nozzle facing downward on
your hair, move the brush and hairdryer in a single
movement until it reaches the end of your hair.
Repeat on other sections of hair.
廯㇏᳦䷠⠚⊷潊⪣ⶌᳳ屫庭 5 ≾
䭙潋Ȥ⫬㞙⨶乔ᵴ⊷㜟ᳱ㒟潎ⵜ⫬弆♱
斬枴┚⫟€⊷䷠潎⋲㓜䣡↎㞙⨶⍲䐛⌟
枴䗚僙⊷㞈Ȥ⫟⁜ḿ⠚⊷悳⟳㩊↎ṂȤ
3 To x your style, press the Cool Shot button ( i)
to get cool airow.
⡨旦⪀♱潎㇯ᳱ₝枴㇯掔 ( i)
󰵬劝⹽₝枴Ȥ
4 To create soft icks: Slightly turn the brush inward
when you reach the hair ends. Press the Cool Shot
button and hold it down for 3-4 seconds with
Cool Shot setting.
塧ㄹ弆䣳≝䕪⊷㞈潜☎壌⊰⊷㞈㓜幡
幡⋷幒↎㞙⨶Ȥ㇯ᳱ₝枴㇯掔
ⵜ㇧䷓3-4 䢸Ȥ
5 To remove the styling nozzle, simply take it o and
the mode will switch to the previous setting.
塧䣡敊弆♱斬枴┚潎⋐旦⫬⁜ㆬᳱ潎
㤇ⷵ⫬󱂎㉈僙ᴱℳ䕪媤乔Ȥ
Note
• The styling nozzle is xed in the position that you
have attached and cannot be rotated. This is to
allow the feature to oer personalized
protection from overheating while you style your
hair.
∕ᘼ
• 弆♱斬枴┚⩯垫№ḳ⋴潎㓆㮻㒱幒Ȥ庿
ṥↅ俣☎⾎弆♱㓜㊶ẁ᳹⭄
ểㆊ潎媏䢦⊷″ᵴ庭㿓㉅ḊȤ
3-4
sec.
9 10