Philips HP8183/00 User manual

Register your product and get support at
www.philips.com/welcome Hairdryer
HP8183
EN User manual

English
Congratulations on your purchase, and welcome to Philips! To fully
benet from the support that Philips offers, register your product at
www.philips.com/welcome.
1 Important
Read this user manual carefully before you use the appliance and keep it
for future reference.
WARNING: Do not use this appliance near water.
•
When the appliance is used in a bathroom, unplug it after use since•
the proximity of water presents a risk, even when the appliance is
switched off.
WARNING: Do not use this appliance near bathtubs,
•
showers, basins or other vessels containing water.
Do not insert metal objects into the air grilles to avoid
•
electric shock.
Never block the air grilles.
•
Before you connect the appliance, ensure that the voltage indicated•
on the appliance corresponds to the local power voltage.
Do not use the appliance for any other purpose than described in
•
this manual.
Do not use the appliance on articial hair.
•
When the appliance is connected to the power, never leave it•
unattended.
Always unplug the appliance after use.
•
Never use any accessories or parts from other manufacturers or that•
Philips does not specically recommend. If you use such accessories
or parts, your guarantee becomes invalid.
Do not wind the mains cord round the appliance.
•

If the mains cord is damaged, you must have it replaced by Philips, a•
service centre authorised by Philips or similarly qualied persons in
order to avoid a hazard.
This appliance is not intended for use by persons (including children)
•
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible
for their safety.
Children should be supervised to ensure that they do not play with
•
the appliance.
For additional protection, we advise you to install a residual current
•
device (RCD) in the electrical circuit that supplies the bathroom.This
RCD must have a rated residual operating current not higher than
30mA. Ask your installer for advice.
If the appliance overheats, it switches off automatically. Unplug the
•
appliance and let it cool down for a few minutes. Before you switch
the appliance on again, check the grilles to make sure they are not
blocked by uff, hair, etc.
Electromagnetic elds (EMF)
This appliance complies with all standards regarding electromagnetic
elds (EMF). If handled properly and according to the instructions in this
user manual, the appliance is safe to use based on scientic evidence
available today.
Environment
Do not throw away the appliance with the normal household
waste at the end of its life, but hand it in at an ofcial collection
point for recycling. By doing this, you help to preserve the
environment.

2 Dry your hair
1Connect the plug to a power supply socket.
For precise drying, attach the concentrator (
• ) onto the
hairdryer ( ).
To enhance volume for curls and bouncy style, attach the diffuser
•
( ) onto the hairdryer ( ).
To disconnect the attachment, pull it off the hairdryer.
•
2 Adjust the airow switch ( ) to I for gentle airow and styling, or II
for strong airow and fast drying. Press the Turbo button ( ) for extra
airow.
3Adjust the temperature switch ( ) to for hot airow, for warm
airow, or for cool airow. Press the Cool Shot button ( ) for
cool airow to x your style.
4The appliance is equipped with ion function, which provides additional
shine and reduces frizz.
When the function is on, a special odor may be smelt. It is normal»
and caused by the ions which are generated.
To turn the ion function on or off, adjust the ion slide switch to»
or ( ).
If the function is on, the ion indicator (») lights up.
• With the Volume diffuser:
To add volume at the root, insert the pins into your hair and make»
rotating movements.
For long hair, spread out sections of hair on top of the diffuser or»
comb the hair downwards with the pins.
To x the style for curly or wavy hair, hold the diffuser at a distance »
of 10-15cm to let it dry gradually.

After use:
1 Switch off the appliance and unplug it.
2Place it on a heat-resistant surface until it cools down.
3Take the air inlet grille ( ) off the appliance to remove hair and dust.
To remove the air inlet grille, press the thumbrests on the left and»
the right side of the air inlet grille simultaneously and pull it off
the appliance.
To reattach the air inlet grille, press the thumbrests on the left»
and the right side of the air inlet grille simultaneously and press it
onto the appliance.
4Clean the appliance by damp cloth.
5Keep it in a safe and dry place, free of dust.You can also hang it with
the hanging loop ( ).
3 Guarantee and service
If you need information e.g. about replacement of an attachment or if
you have a problem, please visit the Philips website at www.philips.com
or contact the Philips Customer Care Centre in your country (you nd
its phone number in the worldwide guarantee leaet). If there is no
Consumer Care Centre in your country, go to your local Philips dealer.

4 Troubleshooting
Problem Cause Solution
The appliance
does not work
at all.
The power socket to
which the appliance
has been connected
may not live.
Ensure the socket is live.
The appliance may
have overheated and
switched itself off.
Unplug the appliance and
let it cool down for a few
minutes. Before you switch
on the appliance again, check
the grilles to make sure they
are not blocked by uff, hair,
etc.
The appliance may
not be suitable for the
voltage to which it has
been connected.
Ensure that the voltage
indicated on the type plate
of the appliance corresponds
to the local power voltage.

© Royal Philips Electronics N.V. 2010
All rights reserved.
Specications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
3140 035 21863