Philips 1000 Series User manual

TAT1215/1225
All manuals and user guides at all-guides.com
all-guides.com

All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com

TAT1215
MICRO-USB
TAT1225
All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com

LR
first
• Charging process is verified by
the LED light. The red light flashes
on the front panel,
• When the charging case is fully
charged,the red light goes on.
While charing earpieces, Red LED will flash.
Red LED stops flashing and keeps lighting
on, means fully charged.
All manuals and user guides at all-guides.com
all-guides.com

TAT1225
TAT1225
Blue LED
ashes once
for 10s
LED ashes
alternately in
white and blue
first
All manuals and user guides at all-guides.com

TAT1225
TAT1225
Take the L / R earpieces from the
charging case, the earpiece will
power on automatically. There will
be a voice " Power on" from L / R
earpiece.
4If you’d like to switch from single earpiece
pairing to dual earpieces pairing mode,
please try below 2ways.
4.1 Put both L and R earpieces back into power
case and then take the 2 earpieces out to pair
and connect Bluetooth again;
4.2 If still not works, try to reset. Put L&R into power
case and press the button for 4 seconds until the
white LED ashes. Then take L&R out of power
case and select BT, connect Bluetooth again. ”
All manuals and user guides at all-guides.com

Backward
Forward
The LED in
charging case
flashes.
The red LED is
lightening.
All manuals and user guides at all-guides.com

TAT1225
TAT1225
All manuals and user guides at all-guides.com