Philips TAH6206 User manual

User manual
Register your product and get support at
www.philips.com/support
Headphones
6000 Series
TAH6206

2 Your wireless
headphones
What's in the box
Quick start guide
Global Warranty
Headphones
USB dongle
Congratulations on your purchase, and
product at www.philips.com/support.
With these Philips wireless headphones
you can:
• Enjoy convenient wireless TV sound
• Enjoy and control music wirelessly
3.5 mm audio cable
USB-C charging cable
Cloth ear pads (one pair)
EN 3
Headphones
Series
CTN

4 EN
Overview of your wireless
headphones
Volume -
Multi-function button (MFB)
Dongle/Mobile selection button (D/M button)
USB-C socket (for charging)
Volume +
LED (Signal indicator, Blue/White)
USB plug
PAIR button
LED (Charging indicator, Amber/White)
Aux jack
LED (status indicator)
Headphones
USB Dongle
10
9
8
7
1
2
3
4
65
11
1
2
3
4
5
6
7
8
9
10
11

3 Get started
Charge the headphones
Note
Charge the headphones with the supplied
USB-C cable for two hours for optimum
battery capacity and lifetime.
Use only the original USB-C charging
cable to avoid any damage.
It is highly recommended to power o the
headphones before battery charging.
Tip
Normally, a full charge takes 2 hours.
Note
Use on TV
Connect the dongle to the TV as below:
TV
TV
1
Power on the headphones.
2
If your TV does not have a USB socket, plug the
dongle into a USB charger and connect to your
TV's headphones jack using the audio cable
provided.
USB USB
EN 5
Plug one end of the USB-C cable into
the headphones and the other end into
a powered USB port. The LED turns
amber during charging and turns white
when the headphones are fully
charged.

TV
TV
Disconnect headphones from TV
•Disconnect the dongle and aux cable
from your TV.
•Turn o the headphones and charge
using the USB cable.
Adjust the volume of the headphones
Note
If your TV does not have a USB socket or a
headphones jack, connect the dongle to a USB
adapter (not included) and connect to the RCA
output on your TV.
USB USB
L R
Audio out
RCA to 3.5 mm cable
(not included)
•On the headphones:
• Use the volume + / - buttons
•On the TV
• Some TVs will automatically mute the
TV speaker and output the sound
through the headphones. In this case,
you can use the TV remote control to
control the volume of your head-
phones.
• Some TVs separate the TV speaker
volume and headphones volume
control. In this case, mute the TV
speaker when using the headphones.
Use the headphones volume buttons
to adjust the volume.
6 EN