Philips HTS3000 User manual

DVD HOIETHEATRE SYSTEM HTS3000
User Manual 6
t_J_ _ (_ _g_)48
_] _-_ (_) 90
Nanual Pengguna [ 32
Thank you for choosing Philips.
Need helpfast?
Readyour Quick Use/Start Guide and/or User Manual first for quick
tips that make usingyour Philipsproduct more enjoyable.
If youhave read your instructions and still need assistance,
you may accessour online help at www.pMlips.comlwekome
1 hts3000 98 eng2indd 1 2007-04-26 6:54:03 PM

Nameof the Parts
Hous i ng
I)Vl) Iocder
I1vl1 Yfl
SubwooFer
houdspevke rs
PWNs
Accessories
(Remot_ control &
c_:b]es)
B Iteries in
Reff/o t ( Col/firo[
(ZnO
Hazardous/Toxic Substance
__(Hg, f_(Cd,
(Pb, Lead) Mercury) Cadmium)
0 0 0
X 0 0
X 0 0
0 0 0
X 0 0
X 0 0
X
(Chromium 6+ (PBB)
0 0
0 0
0 0
0 0
0 0
0 0
0 0
(PBDE)
0
0
0
0
0
0
O: Indicates tlmt ibis toxic or hazardous substance contained in all of the homogeneous
materials fPr this part is below the limit requirement in S3/T11363 2006.
X: Indicates that this toxic or hazardous substance contained in at least one of the
homogeneous materials used fPr this part is aboxe the lindt requirement in SJ/TI 1363 2006.
t${_,_j[[_ Environmental Protection Use Period
£t_4;,q_!_]iq4 (lfi-) ,F,F:_'-,)2
l?J,t_l1_[4o
This logo reibrs to the period ( 1Oyears ) during which the toxic or hazardous substances or elements
contained in electronic information products win not leak or mutate so that the use of these [substances or
elements] will not result in any severe environmental pollution, any bodily i_iury or damage to any assets.
_g,_;_$n, Battery labeling logo
£g{_v'_NlN,RftI_Environmental Protection Use I eriod
_lht,,f3l{#.*O]l_[,_(hq-) ,d[ig{ _ft-(_['lg{_ ,WF,?'-i_b%_.;cg-,!LiIi',:}i'{di/t] (r:J_1"[; Y_ @)_2q.#l. [ff_kVL
Tiffs logo reibrs to the period (5 years )during which the toxic or Imzardous substances or elements
contained in the battery will not leak or mutate so that the use of these [substances or elements] will not
result in any severe enx ironmental pollution, any bodily injury or damage to any assets.

LASER
Type Semiconductor laser
GaAIAs
Wave length 650 - 660 nm (DVD)
784 - 796 nm (CD)
Output Power 7 mW (DVD)
I 0 mW (VCD/CD)
Beam divergence 60 degrees
Due to the inconsistency of disc formats provided
by various disc manufacturers, your DVD system/
player/recorder may require a playability
enhancement or upgrade. As DVD technology
advances, these enhancement will become
common and will be easy to complete.
Go to www.philips.com/support for software upgrade.
r]a
DIGITAL
Manufactured under license from Dolby
Laboratories, Dolby, Pro Logic and the
double-D symbol are trademarks of Dolby
Laboratories.
DivX®, DivX UCerdfied, and associated
Iogos are trademarks of DivX, Inc. and are
used under license.
CAUTION
Use of controls or adjustments or performance
of procedures other than herein may result in
hazardous radiation exposure or other unsafe
operation.
ATTENTION!
For Customer Use:
Read carefully the information located at the
bottom o1"rear of your DVD Home Theater
System and enter below the Serial No. Retain
this information for future reference.
Model No. HTS3000
Serial No.
Windows Media and the Windows logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Hacrovision Corporation and
other rights owners. Use of this copyright
protection technology must be authorized by
Hacrovision Corporation, and is intended for
home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation.
Reselwe engineering or disassembly is prohibited.

Language Code

Index
English
BahasaMelayu,
48
9O
132
I
/
m
/

Table of contents
General information ........................................................................................................ 8
Setup precaudons ................................................................................................................................................. 8
Accessories supplied ........................................................................................................................................... 8
Cleaning discs ........................................................................................................................................................ 8
About recycling ..................................................................................................................................................... 8
Hain Unit ........................................................................................................................... 9
Remote Control ......................................................................................................... 10-12
Using the remote conu'ol ................................................................................................................................ 12
Basic Connections ..................................................................................................... 13-16
Step I: Placing the speakers ............................................................................................................................. 13
Step 2: Connecting to TV ................................................................................................................................ 14
Option l; Using the Video socket ......................................................................................................... 14
Option 2: Connecting to a Progressive Scan TV or component video input ............................ 14
Step 3: Connecting speakers and subwoofer ............................................................................................. 15
Step 4: Connecting the FM and AM/MW antennas .................................................................................. 16
Step S: Connecting the power cord .............................................................................................................. 16
Optional Connections .................................................................................................... 17
Connecting audio from TV ............................................................................................................................. 17
Connecting to cable box/satellite receiver and recordeHVCR ............................................................ 17
Getting Started .......................................................................................................... 18=22
Finding the correct viewing channel ............................................................................................................. ] 8
Switching to different play source ................................................................................................................. 18
Setting language preferences ........................................................................................................................... 19
On-screen display (OSD)language ........................................................................................................ 19
Audio, Subtitle and Menu language for DVD playback ............................................................... 19-20
Setting the TV Display ..................................................................................................................................... 20
Setting up Progressive Scan feature .............................................................................................................. 21
Setting the speakers' channels ....................................................................................................................... 22
Disc Operations ......................................................................................................... 23-3 I
Playable discs ....................................................................................................................................................... 23
Playing a disc ........................................................................................................................................................ 23
Basic playback controls ..................................................................................................................................... 24
Selecting various repeaUshuffle functions ................................................................................................... 24
Programming disc tracks ................................................................................................................................. 25
Other playback features for video discs (DVD/VCD/SVCD) ......................................................... 25-28
Using the Disc Menu ................................................................................................................................. 25
Viewing playback information .................................................................................................................. 26
Zooming in/out ............................................................................................................................................ 26
Changing subtitle language ....................................................................................................................... 26
Switching camera angles ............................................................................................................................ 26
Changing sound track language ............................................................................................................... 27
Setting the delay times for audio playback ........................................................................................... 27
Playback Conu*ol (VCD only) .................................................................................................................. 27
Preview function (VCD/SVCD only) .................................................................................................... 28

Table of contents
Playing a MP3/WMA disc ................................................................................................................................ 29
Playing a JPEG image file (slide show) .......................................................................................................... 30
Preview function ......................................................................................................................................... 30
Zoom picture .............................................................................................................................................. 30
Rotating/flipping the picture ................................................................................................................... 30
Playing MP3/WMA music and JPEG pictures simultaneously ................................................................ 31
Playing a DivX disc ............................................................................................................................................. 31
Setup Menu Options .................................................................................................. 32-37
Accessing the setup menu ................................................................................................................................ 32
General Setup Page............................................................................................................................................ 33
Audio Setup Page............................................................................................................................................... 34
Video Setup Page ................................................................................................................................................ 35
Preference Page ........................................................................................................................................... 36-37
Radio Operations ...................................................................................................... 38-39
Tuning to radio stations ................................................................................................................................... 38
Changing tuning grid ......................................................................................................................................... 38
Presetting radio stations ................................................................................................................................ 38
Using auto install .................................................................................................................................. 38-39
Using automatic preset .............................................................................................................................. 39
Using manual preset ................................................................................................................................... 39
Selecting a preset radio station ...................................................................................................................... 39
Deleting a preset radio station ....................................................................................................................... 39
Sound and Volume Controls ......................................................................................... 40
Volume control .................................................................................................................................................. 40
Selecting surround sound ................................................................................................................................ 40
Selecting digital sound effects ........................................................................................................................ 40
Other Features ................................................................................................................ 4 I
Installing the latest software ........................................................................................................................... 41
Setting the Sleep timer. .................................................................................................................................... 41
Troubleshooting ........................................................................................................ 42-43
Glossary ...................................................................................................................... 44-45
Specifications .................................................................................................................. 46

General Information
WARNING!
This unit does not contain any user-
serviceable parts. Please leave all
maintenance work to clualified
personnel.
Setup precautions
Finding a suitable location
- Place this unit on a fiat, hard and
stable surface. Never place the unit on a
carpet.
- Never place this unit on top of other
equipment that might heat it up (e.g.,
receiver or amplifier).
- Never put anything under this unit
(e.g., CDs, magazines).
- Install this unit near the AC outlet
where the AC power plug can be easily
reached.
Space for ventilation
-Place this unit in a location with
adequate ventilation to prevent internal
heat build up. Allow at least 10 cm (4")
clearance from the rear and the top of
this unit and Scm (2") fl'om the left and
right to prevent overheating.
Avoid high temperature, moisture,
water and dust
-This unit must not be exposed to
dripping or splashing.
- Never place any object or items that
can damage this unit (e.g., liquid filled
objects, lighted candles).
Accessories supplied
-Isubwoofer
- 2 front speakers
- 2 rear speakers
- I centre speaker
- I remote control with batteries
- I composite video cable
- I FM wire antenna
- I AM/MW loop antenna
- I power cable
- Quick Start Guide
Cleaning discs
To clean adisc, use a micro fibre cleaning
cloth and wipe the disc from the centre
to the edge in a straight line.
CAUTION!
Never use solvents e.g. benzene, thinner,
commercially available cleaners, or anti-
static sprays intended for discs.
About recycling
These operating instructions have been
printed on non-polluting paper. The
electronic equipment contains a large
number of materials that can be recycled.
If you are disposing of an old machine,
please take it to a recycling centre.
Please observe the local regulations
regarding disposal of packaging materials,
exhausted batteries and old equipment.

Main Unit
(_) STANDBY-ON
-Turns on this unit or turns off to normal
standby mode.
(_) Disc Tray
(_) OPEN/CLOSE A
-Opens/closes the disc tray.
(_) Display panel
(_) PLAY/PAUSE _11
- DISC: starts/pauses playback.
- RADIO: starts auto radio installation for
first time setup,
(_) SOURCE
-Selects the relevant active source mode:
DISC, FM, AM/MW, TV or AUX.
(7) SURROUND
- Selects multi-channel surround or stereo
mode.
(_) STOP []
-Exits an operation.
- DISC: stops playback.
- RADIO: press and hold this button to
erase the current preset radio station.
(_) VOL
-Adjusts the volume level.

Remote Control
O©
-Turns on this unit or turns off to normal
standby mode,
@Source buttons
DISC: switches to DISC mode.
RADIO: toggles between FM and AM/
MW band.
TV: switches to TV mode, The sound
from the TV will output through the
connected speaker system.
AUX: switches to the external device
that is connected to the AUDIO IN-AUX
socket.
(3) OPEN/CLOSE
- Opens/closes the disc tray.
(_) PROGRAM
- DISC: starts programming.
- RADIO: press and hold this button to
start automatic/manual preset
programming.
(_) REPEAT
- Selects various repeat or shuffle modes;
turns off repeat or shuffle mode,
_) SETUP
-Enters or exits the system setup menu.
_) DISPLAY
- Displays the current status or disc
information,
- Selects a different viewing angle of a DVD
movie (if available).
@PLAY/PAUSE _1!
- DISC: starts/pauses playback.
- RADIO: starts auto radio installation for
first time setup.
(_) STOP []
-Exits an operation,
- DISC: stops playback.
- RADIO: press and hold this button to
erase the current preset radio station.
(_) TV VOL +/--
- Adjusts the volume of the TV (for Philips
TVs or compatible brands only).
®AUDIO SYNC
Sets the audio output delay times if the
video playback is slower than the audio
output.
_) ZOOM
- Zoom in or out the picture on the TV.
(_) ANGLE
- Selects a different viewing angle of a DVD
movie (if available).
l0

®
®
®
®
SLEEP
Setsthe sleep timer function_
DISC MENU
For DVD, enters or exits disc contents
menu.
For VCD/SVCD, enters digest menu.
Remote Control (continued)
OK
Confirms an entry or selection.
A_4
DISC: selects movement direction in the
menu.
DISC: press left or right for fast forward
and backward search.
RADIO: press up or down to tune the
radio frequency.
RADIO: press left or right to start auto
search.
(_) TITLE *_
- For DVD, go back to the previous menu.
- For VCD version 2.0 only;
During playback, display the disc title
menu or return to the main menu.
®
m
@
®
@
PREY 14 /NEXT _1
DISC: skips to the previous or next title/
chapter/track.
RADIO: selects a preset radio station.
MUTE o_<
Mutes or restores the volume.
VOL +/-
Adjusts the volume level.
SURROUND
Selects multi-channel surround or
stereo mode.
@SUBTITLE
- Selects a DVD subtitle language.
@AUDIO
-DISC: selects an audio language/channel.
@ Numeric keypad 0=9
-Enters atracldtitle number of the disc.
- Enters a number of a preset radio station.
(_ SOUND
- Selects a predefined sound effect.

Remote Control (continued)
Using the remote control CAUTION!
- Remove batteries if they are
exhausted or if the remote control
is not to be used for a long time.
-Never mix batteries (old and new
or carbon and alkaline, etc).
- Batteries contain chemical
substances, they should be disposed
of propermy.
@
@
@
@
@
Open the battery compartment.
Insert two batteries type R03 or AAA,
following the indications (-k --) inside
the compartment.
Close the cover.
Point the remote control directly at the
remote sensor fiR) on the front panel,
Select the source you wish to control by
pressing the DISC_ RADIO, TV or AUX
button on the remote control.
@ Then select the desired function (for
example 14, 1_1).
12

Basic Connections
Step I: Placing the speakers
The Philips Home Theatre System is
simple to install. However, proper system
placement is critical to ensure an
optimum sound experience.
Place the front left and right speakers at
equal distances from the TV and at an
angle of approximately 45 degrees from
the listening position.
Place the centre speaker above the TV or
the main unit such that the centre
channel's sound is [ocaJised.
Place the rear speakers at normal
listening ear level facing each other or
hang on the wall.
Place the subwoofer at the corner of the
room. Otherwise, keep it at least one
metre away from the TV.
Helpful Hints:
-The placement diagram shown here is only
a guideline that provides great system
performance. You may find other placement
choices that are more suitable for your room
layout that provide the sound experience you
enjoy.
-To avoid magnetic interference, never
position the front speakers too close to your
TV.
-The rear speakers are labelled as REAR
LEFT or REAR RIGHT.
-The front speakers are labelled as
FRONT LEFT or FRONT RIGHT.
-For speaker setting, see "Getting Started -
Setting the speakers" channel'.
13

Basic Connections (continued)
Step 2: Connecting toTV
This connection enables you to view the
video playback from this unit. You only
need to choose one of the options
below to make the video connection.
- For a standard TV, follow option I.
- For a progressive scan TV, follow
option 2.
Helpful Hint:
-It is important to connect this unit directly
to the TV in order to enjoy optimum video
quality.
14
® Connect a composite video cable
(supplied) from the CVBS socket on the
main unit to the video input socket (or
labelled as A/V In, Video In, Composite
or Baseband) on the TV.
The progresswe scan video quality is only
available when using Y Pb Pr connection
and a progressive scan TV is required. It
provides superior picture quality when
watching DVD movies.
Connect the component video cables
(red/blue/green - not supplied) from the
Y Pb Pr sockets on the main unit to the
corresponding component video input
sockets (or labelled as Y Pb/Cb Pr/Cr or
YUV) on the TV.
If your TV accepts progressive signals,
proceed to chapter 'Getting Started -
Setting up Progressive Scan feature' for
detailed progressive feature setup.

Basic Connections (continued)
Step 3: Connecting speakers
and subwoofer
Connect all the speakers and subwoofer
to the matching sockets at the rear of the
main unit, Make sure that the colours of
the plugs and sockets are matched.
Helpful Hint:
-To prevent unwanted noise, never place
the speakers too close to the main unit,
subwoofer, AC power adopter, TV or any
other radiation sources.
IS

Basic Connections (continued)
Step 4: Connecting the
FM and AMIMW
antennas
@ Connect the supplied AM/MW loop
antenna to the AM/MW socket. Place
the AM/MW loop antenna on a shelf, or
attach it to a stand or wall.
0 Connect the supplied FM antenna to the
FM 75 _ socket. Extend the FM antenna
and fix its ends to the wall.
For better FM stereo reception, connect
an external FM antenna (not supplied).
Helpful Hints:
-Adjust the position of the antennas for
optimal reception.
- Position the antennas as far away as
possible from your T¼ VCR or other
radiation source to prevent any unwanted
interference.
Step 5: Connecting the
power cord
_OteS;
- For power supply rating, refer to the
rear or bottom of the main unit.
- Turning off to standby mode does not
disconnect the unit from mains.
Connect the AC power cord to the
power outlet.
÷ The standby LED on the main unit
lights up.
Helpful Hint:
-Before making or changing any
connections, make sure that all the devices
are disconnected from the power outlet.
16

Optional Connections
Connecting audio from TV
When connecting the audio output from
your TV to this Home Theatre System,
you can have the sound of the TV output
on all the speakers. It enables you to
enjoy the multi-channel surround sound
capabilities.
Connect an audio cable (red/white - not
supplied) from the AUDIO IN-TV
sockets on the main unit to the AUDIO
OUT sockets on the TV.
To listen to the sound, press TV on the
remote control as the sound source that
you want to listen to.
Connecting to cable box/
satellite receiver and
recorclerNCR
You can connect the audio output from
an audio/video device (e.g. DVD
Recorder, VCR, Cable/Satellite Box) to
this Home Theatre System in order to
enjoy the multi-channel surround sound
capabilities.
Connect an audio cable (red/white - not
supplied) from the AUDIO IN-AUX
sockets on the main unit to the AUDIO
OUT sockets on the connected device.
To listen to the sound, press AUX as
the sound source that you want to listen
tO,
17

Getting Started
Finding the correct viewing
channel Switching to different play
Source
@
@
Press SOURCE button on the main unit
until 'DISC' appears on the display panel
(or DISC on the remote control).
Turn on the TV and switch it to the
correct video-in channel.
....÷ You may go to the lowest channel on
your TV, then press the Channel Down
button on your TVs remote control until
you see the Video In channel.
....÷ You may press -_D button repeatedly
on your TV's remote control.
....÷ Usually this channel is between the
lowest and highest channels and may be
called FRONT, A/V IN, VIDEO, etc..
...._ Refer to your TVs user manual on
how to select the correct input on your
TV.
÷ Press the SOURCE button on the front
panel repeatedly to select:
DISC _ FPI _ API/PIW _ TV
AUX _ DISC ....
SOURCE
Or
Press DISC, RADIO, TV or AUX on
the remote control.
...._ Press DISC to switch to DISC mode.
....÷ Press RADIO to toggle between FM
and AM/PIW band.
...._ If the audio input on this unit is
connected to your TV, press TV to hear
the TVs sound output through this unit.
...._ Press AUX for switching to the
external device that is connected to the
AUDIO IN-AUX socket on this unit.
18

Getting Started (continued)
Setting language preferences
The language options are different
depending on your country or region. It
may not correspond to the illustrations
shown on the user manual.
@
The OSD (On-Screen Display) language
for this unit remains as you have set it,
regardless of the changes made to the
DVD disc language.
In disc mode, press SETUP on the
remote control.
...._ { General Setup Page } appears.
@ Press Y to highlight { OSD Language }
in the menu and press •.
@ Use AV keys to select a language and
press OK to confirm.
You can select your preferred language
settings for DVD playback. If the selected
language is recorded on the DVD disc,
this unit automatically plays the disc in
that language. Otherwise, the disc's
default language will be used instead.
@ Press •twice to stop playback (if any),
then press SETUP.
@ Press • repeatedly to select
{ Preference Page }.
@ Use AV keys to select one of the
options below and press •.
{Audio }
Selects the preferred audio language for
DVD playback.
{Subtitle }
Selects the preferred subtitle language for
DVD playback.
{Disc Henu }
Selects the preferred disc menu language
for DVD playback.
@ Use AV keys to select a language and
press OK to confirm.
1 hts3000 98 eng2indd 19
19
2007-04-26 6:54:07 PM I
I

Getting Started (continued)
If the language you want is not
available in the list, select { Others }.
Use the numeric keypad (0-9) on the
remote control to enter the 4-digit
language code 'XXXX' (see page 4) and
press OK to confirm.
O Repeat steps O_ O for other settings.
Helpful Hints:
-During DVD playback, you can switch the
audio and subtitle languages by pressing the
AUDIO and SUBTITLE buttons on the
remote control, However, this does not
change the default settings you have made
here.
-For same DVDs, the subtitle/audio/menu
language can only be changed via the DVD
disc menu,
Setting theTV Display
Set the aspect ratio of this unit according
to the TV type you have connected. The
format you select must be available on
the disc. If it is not, the setting for TV
display will not affect the picture during
playback.
In disc mode, press SETUP on the
remote control
Press i_ repeatedly to select {Video
Setup Page }.
Press _" to highlight { TM Display } in
the menu and press l_.
{ 4:3 Pan Scan } "i
Select this if you have a i i
conventional TV and i. :: _
want both sides of the
picture to be trimmed or formatted
to fit your TV.
{ 4:3 Letter Box }
Select this if you have a
conventional TV. In this
case, a wide picture with
black bands on the upper and lower
portions of the TV will be displayed.
{ 16:9 Wide Screen }
Select this if you have a
wide-screen TV.
Select one of the options and press OK
to confirm.
20