Philips LX3900SA Operating manual

~AC
MAINS
FRONT
RIGHT
CENTER FRONT
LEFT
REAR
RIGHT
REAR
LEFT
SUB-
W
SPEAKERS (4 )
AUX IN LINE OUT
AUDIO
L
R
S-VIDEO
MW
FM/MW ANTENNA
FM 75
DIGITAL
IN
CVBS
LX3900SA
TV IN
VIDEO OUT
Pr Pb
Y
Pr/Cr
P b /C b
Y
First connect ...
... then play
(see next page)
Front Speaker
(left)
Rear Speaker
(right)
Rear Speaker
(left)
Centre Speaker MW loop
antenna FM antenna
Scart cable
12nc: 3139 115 23311
Front Speaker
(right)
Subwoofer
C BGH A
B
C
JH
J
D
A
EF
G
Helpful Hints
To obtain a better picture quality effect, you can
choose to connect an extra video connection if
your TV has the same input connector: Aor B.
If your TV has
this video input jack(s)
A
B
Use this video
cable (not supplied)
S-VIDEO
IN
COMPONENT VIDEO IN
ANTENNA IN
When listening to TV programmes, press TV button on the remote to
set the DVD system to TV mode in order for the sound to be heard.
For connecting to aVCR, see page 11 in the owner’s manual for more
details.
If yourTV has only
a single Antenna In
jack, you will need an
accessory RF
modulator. The RF modulator
converts the video from the
DVD system so it can play
through the TV’s Antenna
connector. Refer to your
owner’s manual for proper
connection (refer to page 9in
the owner’s manual).
LX3900-69 QUG-EngFinal 20/04/2004, 09:58 AM1
All manuals and user guides at all-guides.com
all-guides.com

ALL
SUPER VIDEO
Detailed playback features and additional functions are described in the
accompanying owner’s manual.
Playing a disc
1Press DISC on the remote control.
You can also press the SOURCE button on the front
panel until “DISC” appears on the display panel.
2Turn on theTV and select the correct Video
In mode.
You should see the blue DVD background screen on the
TV (if no disc in the DVD system).
3Press OPEN• CLOSE 0on the front of the
DVD system and load a disc, then press
OPEN•CLOSE 0again to close the disc
tray.
Make sure the disc label is facing up. For double-sided
discs, load the side you want to play face up.
4Playback will start automatically.
If a disc menu appears, use 3412buttons on the
remote to make the necessary selection, then press OK
to confirm. Or, use the numeric keypad on the remote to
select features. Follow the instructions given in the disc
menu.
5To stop playback, press STOPÇ.
Make sure your DVD system and
TV are connected and turned on!
Check the AV (Audio/Video) mode
on your TV.
* Usually this channel is between the lowest
and highest channels and may be called
FRONT, A/V IN, or VIDEO.
* Or, you may go to channel 1 on your TV,
then press the Channel down button
repeatedly until you see theVideo In
channel.
* Or, your TV remote control may have a
button or switch that chooses different
video modes.
* Do not use channel 3 or 4 on the TV
unless you are using an RF modulator.
* See yourTV manual for more details.
No picture?
TV TYPE
TV DISPLAY
PICTURE SETTING
COMPONENT
PROGRESSIVE
DISC LOCK
DISPLAY DIM
PROGRAM
OSD LANGUAGE
SCREEN SAVER
ANALOG OUTPUT
SPEAKER SETUP
NIGHT MODE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PBC
MP3/JPEG NAV
PAS SW ORD
DEFAULT
- - VIDEO SETUP PAGE - - - - PREFERENCE PAGE - -
- - GENERAL SETUP PAGE - - - - AUDIO SETUP PAGE - -
2
Using the DVD setup menu
LX3900-69 QUG-EngFinal 20/04/2004, 09:58 AM2
All manuals and user guides at all-guides.com