Philips HTS3107/98 User manual

English
DVD HOME THEATRE SYSTEM HTS3107
welcome
User Manual

2
Language Code

3
English
LASER
Type Semiconductor laser
GaAIAs
Wave length 650 - 660 nm (DVD)
784 - 796 nm (CD)
Output Power 7 mW (DVD)
10 mW (VCD/CD)
Beam divergence 60 degrees
ATTENTION!
For Customer Use:
Read carefully the information located at the
bottom or rear of your DVD Home Theatre
System and enter below the Serial No. Retain
this information for future reference.
Model No. HTS3107
Serial No. _______________
CAUTION
Use of controls or adjustments or performance
of procedures other than herein may result in
hazardous radiation exposure or other unsafe
operation.
Manufactured under license from Dolby
Laboratories, Dolby, Pro Logic and the double-D
symbol are trademarks of Dolby Laboratories.
Manufactured under license from one or more of
the following DTS, Inc. U.S. Pat. No’s: 5,451,942;
5,956,674; 5,974,380; 5,978,762; 6,226,616;
6,487,535 and other U.S. and world-wide patents
issued and pending. ”DTS” and “DTS Digital
Surround” are registered trademarks of DTS, Inc.
Copyright 1996, 2002-2006, DTS, Inc. All Rights
Reserved.
Windows Media and the Windows logo are
trademarks, or registered trademarks of Microsoft
Corporation in the United States and/or other
countries.
DivX Ultra Certied products: “DivX, DivX Ultra
Certied, and associated logos are trademarks of
DivX, Inc. and are used under license.
‘CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE
ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN
CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE ‘STANDARD
DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR TV SET COMPATIBILITY WITH THIS
MODEL 525p AND 625p DVD PLAYER, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.’

4
English
Table of contents
General
General Information ........................................................................................................ 6
Setup precautions.................................................................................................................................................6
Accessories supplied ...........................................................................................................................................6
Cleaning discs ........................................................................................................................................................6
About recycling.....................................................................................................................................................6
Product Overview
Main Unit ........................................................................................................................... 7
Remote Control ...........................................................................................................8-10
Using the remote control ................................................................................................................................10
Connections
Basic Connections ..................................................................................................... 11-14
Step 1 : Placing the speakers ...........................................................................................................................11
Step 2 : Connecting the speakers and subwoofer.....................................................................................12
Step 3 : Connecting to TV...............................................................................................................................13
Option 1: Using the Video (CVBS) socket ..........................................................................................13
Option 2: Connecting to a Progressive Scan TV or component video input............................13
Step 4 : Connecting the FM/MW antennas ...................................................................................................14
Step 5 : Connecting the power cord ............................................................................................................14
Optional Connections .................................................................................................... 15
Connecting audio from TV .............................................................................................................................15
Connecting audio from an analogue audio/video device.........................................................................15
Basic Setup
Getting Started .........................................................................................................16-21
Step 1: Turning on the DVD system .............................................................................................................16
Turning off to Eco Power standby mode..............................................................................................16
Step 2: Finding the correct viewing channel ...............................................................................................16
Step 3: Setting language preferences ............................................................................................................17
On-screen display (OSD) language ........................................................................................................17
Audio, Subtitle and Menu language for DVD playback............................................................... 17-18
Step 4: Setting the TV.......................................................................................................................................18
Selecting the matching colour system ............................................................................................18-19
Setting the TV Display...............................................................................................................................19
Step 5: Setting up Progressive Scan feature............................................................................................... 20
Step 6: Setting the speakers’ channels..........................................................................................................21
Disc Playback
Disc Operations ........................................................................................................ 22-30
Playable discs ...................................................................................................................................................... 22
Playing a disc ....................................................................................................................................................... 22
Basic playback controls.....................................................................................................................................23
Selecting various repeat/shufe functions...................................................................................................23
Programming disc tracks..................................................................................................................................24

5
English
Table of contents
Other playback features for video discs (DVD/VCD/SVCD) ...............................................................24
Using the Disc Menu ..................................................................................................................................24
Viewing playback information................................................................................................................. 25
Resuming playback from the last stopped point................................................................................ 25
Zooming in................................................................................................................................................... 25
Changing subtitle language (DVD only) ............................................................................................... 25
Changing sound track language...............................................................................................................26
Selecting camera angles.............................................................................................................................26
Playback Control (VCD only)..................................................................................................................26
Preview function (VCD/SVCD only) .....................................................................................................26
Playing an MP3/ JPEG/Window Media Audio disc ....................................................................................27
Playing a JPEG image le (slide show) ......................................................................................................... 28
Preview function......................................................................................................................................... 28
Zoom picture ............................................................................................................................................. 28
Rotating/ipping the picture ................................................................................................................... 28
Playing MP3 music and JPEG pictures simultaneously..............................................................................29
Playing a DivX disc .............................................................................................................................................29
Playing a Karaoke disc...................................................................................................................................... 30
Microphone setting .................................................................................................................................. 30
Setup Options
DVD Setup Menu Options........................................................................................31-37
Accessing the DVD setup menu.....................................................................................................................31
General Setup Page............................................................................................................................................32
Audio Setup Page................................................................................................................................................33
Video Setup Page.........................................................................................................................................34-35
Preference Setup Page ............................................................................................................................... 36-37
Radio Tuning
Tuner Operations ..................................................................................................... 38-39
Tuning to radio stations................................................................................................................................... 38
Presetting radio stations ................................................................................................................................. 38
Using auto install ........................................................................................................................................ 38
Using automatic preset..............................................................................................................................39
Using manual preset ...................................................................................................................................39
Selecting a preset radio station......................................................................................................................39
Deleting a preset radio station.......................................................................................................................39
Changing tuning grid..........................................................................................................................................39
Others
Sound and Volume Controls .........................................................................................40
Selecting surround sound................................................................................................................................40
Selecting digital sound effects...........................................................................................................................0
Volume control .....................................................................................................................................................0
Other Features..................................................................................................................1
Controlling ‘Philips’ TV with the remote control.......................................................................................1
Software upgrades ...............................................................................................................................................1
Troubleshooting.............................................................................................................2-3
Glossary.............................................................................................................................-5
Specications .................................................................................................................... 6

6
English
General Information
CAUTION!
The machine does not contain any
user-serviceable parts. Please leave
all maintenance work to qualied
personnel.
Setup precautions
Finding a suitable location
– Place the set on a at, hard and stable
surface. Do not place the set on a carpet.
– Do not position the set on top of
other equipment that might heat it up
(e.g., receiver or amplier).
– Do not put anything under the set
(e.g., CDs, magazines).
– Install this unit near the AC outlet
where the AC power plug can be easily
reached.
Space for ventilation
– Place the apparatus in a location with
adequate ventilation to prevent internal
heat build up. Allow at least 10 cm (4”)
clearance from the rear and the top of
the set and 5cm (2”) from the left and
right to prevent overheating.
10cm (4") 10cm (4")
5cm (2")
5cm (2")
Avoid high temperature, moisture,
water and dust
– Apparatus must not be exposed to
dripping or splashing.
– Do not place any object or items that
can damage the apparatus (e.g., liquid
lled objects, lighted candles).
Accessories supplied
– 1 passive subwoofer
– 4 satellite speakers
– 1 centre speaker
– 1 remote control with batteries
– 1 composite video cable (yellow)
– 1 FM wire antenna
– 1 MW loop antenna
– Quick Start Guide
Cleaning discs
Some problems occur (frozen picture,
sound disruptions, picture distortions)
because the disc inside the unit is dirty.
To avoid these problems, discs should be
cleaned on a regular basis.
To clean a disc, use a micro bre cleaning
cloth and wipe the disc from the centre
to the edge in a straight line.
CAUTION!
Do not use solvents such as benzene,
thinner, commercially available cleaners,
or anti-static sprays intended for discs.
About recycling
These operating instructions have been
printed on non-polluting paper. The
electronic equipment contains a large
number of materials that can be recycled.
If you are disposing of an old machine,
please take it to a recycling centre.
Please observe the local regulations
regarding disposal of packaging materials,
exhausted batteries and old equipment.

7
English
Main Unit
aSTANDBY ON 2
– Turns on the system or turns off to Eco
Power standby mode.
bDisc tray
cOPEN CLOSE ç
– Opens/ closes the disc tray.
dSystem display panel
eu(PLAY PAUSE)
– DISC: starts/pauses playback.
– TUNER: starts auto tuner installation for
rst time setup.
Ç (STOP)
– Exits an operation.
– DISC: stops playback.
– TUNER: hold down this button to erase
the current preset radio station.
.>
– DISC: selects a track or hold down this
button to search backward/forward.
– TUNER: selects a preset radio station.
fSOURCE
– Selects the relevant active source mode:
DISC, TUNER (FM/MW), TV or AUX.
gVOL
– Adjusts the volume level.
hMIC LEVEL
– Activates microphone level mode and use
the VOLUME control to set the
microphone volume level.
iMIC
– For connecting the microphone socket.
9
8
123467
5

8
English
Remote Control
2
3
4
5
6
7
8
9
10
11
12
1
a2
– Turns on the system or turns off to Eco
Power standby mode.
bSource buttons
– DISC: switches to DISC mode.
TUNER: toggles between FM and MW
band.
TV: switches to TV mode.
The sound from the TV will output
through the connected speaker system.
AUX/DI: switches to the external device
which is connected to this DVD system.
cZOOM
– Enlarges a picture on the TV screen.
dAUDIO
– Selects an audio language (DVD) or an
audio channel (CD).
eSETUP
– Enters or exits the system setup menu.
fDISPLAY
– Displays the current status or disc
information.
gPLAY É
– DISC: starts playback.
hSTOP Ç
– Exits an operation.
– DISC: stops playback.
– DISC: hold down this button to open and
close the disc tray.
– TUNER: hold down this button to erase
the current preset radio station.
iTV VOL +-
– Adjusts TV volume (Philips TV only).
jNumeric Keypad (0-9)
– Enters a track/title number of the disc.
– Enters a number of a preset radio station.
kREPEAT
– Selects various repeat modes; turns off
repeat mode.
lVOCAL
– Toggles between various audio mode
options.
KARAOKE
– Enters microphone setup menu.

9
English
Remote Control (continued)
13
14
15
16
17
18
20
21
22
23
24
25
19
mSUBTITLE
– Selects a DVD subtitle language.
nANGLE
– Selects a DVD disc camera angle (if
available).
oDISC MENU
– For DVD, enters or exits disc contents
menu.
– For VCD/SVCD, enters digest menu.
pWXST
– DISC: selects movement direction in the
menu.
– TUNER: press left or right to tune the
radio frequency.
– TUNER: press up or down to start auto
search.
qOK
– Conrms a selection.
rRETURN/TITLE
– For DVD, go back to the previous menu.
– For VCD version 2.0 only;
In stop mode, turn on/off playback
control (PBC) mode.
During playback, display the disc title
menu or return to the main menu.
s.>
– DISC: hold down this button for fast
forward and backward search.
– TV: selects previous/next channel (Philips
TV only).
– TUNER: selects a preset radio station.
tPAUSE Å
– DISC: pauses playback.
uVOL +-
– Adjusts the volume level.
vMUTE
– Mutes or restores the volume.
wPROGRAM
– DISC: starts programming.
– TUNER: hold down this button to start
automatic/ manual preset programming.
xSURR.
– Selects multi-channel surround or
stereo mode.
ySOUND
– Selects a predened sound effect.

10
English
Remote Control (continued)
Using the remote control
AOpen the battery compartment.
BInsert two batteries type R03 or AAA,
following the indications (+-) inside
the compartment.
CClose the cover.
DPoint the remote control directly at the
remote sensor (iR) on the front panel.
ESelect the source you wish to control by
pressing the DISC, TUNER, TV or
AUX/DI button on the remote control.
FThen select the desired function (for
example ., >).
CAUTION!
– Remove batteries if they are
exhausted or if the remote control
is not to be used for a long time.
– Do not mix batteries (old and new
or carbon and alkaline, etc.).
– Batteries contain chemical
substances, so they should be
disposed of properly.

11
English
Step 1: Placing the speakers
The Philips Home Theatre System is
simple to install. However, proper
system placement is critical to ensure an
optimum sound experience.
APlace the front left and right speakers at
equal distances from the TV and at an
angle of approximately 5 degrees from
the listening position.
BPlace the centre speaker above the TV or
the DVD system so that the centre
channel’s sound is localised.
CPlace the rear speakers at normal
listening ear level facing each other or
hang on the wall.
DPlace the subwoofer at the corner of the
room. Keep at least one metre away
from the TV.
Helpful Hints:
– The placement diagram shown here is only
a guideline that will provide great system
performance. You may nd other placement
choices that are more suitable for your room
layout and provide the sound experience you
enjoy.
– To avoid magnetic interference, do not
position the front speakers too close to your
TV.
– The rear speakers are labeled as REAR
LEFT or REAR RIGHT.
– The front speakers are labeled as
FRONT LEFT or FRONT RIGHT.
Basic Connections
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.

12
English
Step 2: Connecting the
speakers and subwoofer

Connect all the speakers and subwoofer
to the speaker sockets at the rear of the
DVD system. Make sure that the colours
of the plugs and sockets are matched.
Helpful Hint:
– To prevent unwanted noise, do not place
the speakers too close to the DVD system,
AC power adapter, TV or any other radiation
sources.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
Basic Connections (continued)
FRONT
LEFT
FRONT
RIGHT
REAR RIGHTREAR LEFT
CENTER
SUBWOOFER

13
English
Basic Connections (continued)
Step 3: Connecting to TV
This connection enables you to view the
playback from this DVD system. You only
need to choose one of the options
below to make your video connection.
– For a standard TV, follow option 1.
– For a progressive scan TV, follow
option 2.
IMPORTANT!
Connect the DVD system directly
to the TV.
Option 1: Using the Video (CVBS)
socket (good picture quality)
Use the supplied composite video cable
(yellow) to connect the CVBS socket on
the DVD system to the video input
socket (or labeled as A/V In, Video In,
Composite or Baseband) on the TV.
OR
Option 2: Connecting to a
Progressive ScanTV or component
video input
The progressive scan video quality is only
available when using Y Pb Pr connection
and a progressive scan TV is required. It
provides superior picture quality when
watching DVD movies.
AFollow option 1 to make the basic video
connection.
BUse the component video cables (red/
blue/green - not supplied) to connect the
Y PBPRsockets on the DVD system to
the corresponding component video
input sockets (or labeled as Y Pb/Cb Pr/
Cr or YUV) on the TV.
CIf your TV accepts progressive signals,
proceed to ‘Getting Started - Step 5:
Setting up Progressive Scan feature’ for
detailed progressive feature setup.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
Option 2
Option 1

14
English
Step : Connecting the FM/
MW antennas
AConnect the supplied MW loop antenna
to the MW socket. Place the MW loop
antenna on a shelf, or attach it to a stand
or wall.
BConnect the supplied FM antenna to the
FM socket. Extend the FM antenna and
x its ends to the wall.
For better FM stereo reception, connect
an external FM antenna (not supplied).
Helpful Hints:
– Adjust the position of the antennas for
optimal reception.
– Position the antennas as far away as
possible from your TV, VCR or other
radiation source to prevent any unwanted
interference.
Step 5: Connecting the
power cord
After everything is connected
properly, plug the AC power cord
into the power outlet.
The Eco Power LED on the DVD system
will light up. Never make or change any
connections with the power turned on.
Helpful Hints:
– Refer to the type plate at the rear or
bottom of the product for identication and
supply ratings.
1
2
>
Basic Connections (continued)
TV
x the claw
into the slot
FM antenna
MW
antenna
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.

15
English
Optional Connections
Connecting audio from TV
When connecting the audio output from
your TV to this Home Theatre Audio
System, you can enjoy the multi-channel
surround sound capabilities.
Use an audio cable (red/white - not
supplied) to connect the TV IN jacks on
this DVD system to the AUDIO OUT
sockets on the TV.
To listen to the sound, press TV on the
remote control as the sound source that
you want to play.
Connecting audio from an
analogue audio/video device
You can connect the audio output from
an analogue audio/video device (e.g. VCR,
Cable/Satellite Box or TV) to this Home
Theatre Audio System in order to enjoy
the multi-channel surround sound
capabilities
Use an audio cable (red/white - not
supplied) to connect the AUX IN
sockets on this DVD system to the
AUDIO OUT sockets on the connected
device.
To listen to the sound, press AUX/DI as
the sound source that you want to play.
Helpful Hint:
– To see the picture of the connected video
device (e.g. VCR), connect the VIDEO OUT
socket of the device to the VIDEO IN socket
of the TV, and select the correct input
channel on the TV.
TIPS: Refer to the respective connected device’s user manual for other possible connections.

16
English
Step 1: Turning on the DVD
system
APress STANDBY ON (2).
B Press the SOURCE button on the front
panel repeatedly to select :
DISC ¤FM ¤MW ¤TV ¤AUX
¤DISC ....
Or

Press DISC, TUNER, TV or AUX/DI
on the remote control.
Turning off to Eco Power standby
mode
Press STANDBY ON (2).
The display screen will turn off.
Getting Started
Step 2: Finding the correct
viewing channel
Before you start ...
Make sure you have completed all the
necessary connections.
APress SOURCE button until “DISC”
appears on the display panel.
BTurn on the TV and set it to the correct
video-in channel. You should see the
blue DVD background screen on the TV.
You may go to Channel 1 on your TV,
then press the Channel Down button on
your TV’s remote control until you see
the Video In channel.
You may press °button repeatedly
on your TV’s remote control.
Usually this channel is between the
lowest and highest channels and may be
called FRONT, A/V IN, VIDEO. See your
TV manual for more details.

17
English
Step 3: Setting language
preferences
The language options are different
depending on your country or region. It
may not correspond to the illustrations
shown on the user manual.
On-screen display (OSD) language
The OSD (On-Screen Display) language
for this DVD system will remain as you
have set it, regardless of the changes
made to the DVD disc language.
AIn ‘DISC’ mode, press SETUP on the
remote control.
{ General Setup Page } appears.
BUse ST keys to highlight { OSD
Language }, then press X.
General Setup Page
Disc Lock
Display Dim
Program
OSD Language
Screen Saver
DivX(R) VOD Code
English
Dansk
Deutsch
Espanõl
Français
Nederlands
Norsk
CUse ST keys to select a language and
press OK to conrm.
Audio, Subtitle and Menu language
for DVD playback
You can select your preferred language
settings for DVD playback. If the
selected language is recorded on the
DVD disc, the DVD system will
automatically play the disc in that
language. Otherwise, the disc’s default
language will be used instead.
APress Çtwice to stop playback (if any),
then press SETUP.
BPress Xrepeatedly to select
{ Preference Page }.
CUse ST keys to highlight one of the
options below, then press X.
Preference Page
Audio
Subtitle
Disc Menu
PBC
MP3/JPEG Nav
Password
DivX Subtitle
Default
{ Audio }
Selects the preferred audio language for
DVD playback.
{ Subtitle }
Selects the preferred subtitle language for
DVD playback.
{ Disc Menu }
Selects the preferred disc menu language
for DVD playback.
DUse ST keys to select a language and
press OK to conrm.
Getting Started (continued)
TIPS: Press Wto go back to the previous menu item. Press SETUP to exit the menu.

18
English
If the language you want is not
available in the list, select { Others }.
Use the numeric keypad (0-9) on the
remote control to enter the 4-digit
language code ‘XXXX’ (see page 2) and
press OK to conrm.
ERepeat steps C~ Dfor other settings.
Helpful Hints:
– During DVD playback, you can switch the
audio and subtitle languages by pressing the
AUDIO and SUBTITLE buttons on the
remote control. However, this does not
change the default settings you have made
here.
– For some DVDs, the subtitle/audio/menu
language can only be changed via the DVD
disc menu.
Step 4: Setting the TV
Selecting the matching colour
system
The colour system of the DVD system,
DVD and TV should match. Only then
will it be possible to play a DVD on this
system. Before changing the TV system,
determine the colour system of your TV.
AIn ‘DISC’ mode, press SETUP on the
remote control.
BPress Xrepeatedly to select { Video
Setup Page }.
CPress Tto highlight { TV Type }, then
press X.
Video Setup Page
TV Type
TV Display
Progressive
Picture Setting
NTSC
PAL
Multi
{ PAL }
Select this if the connected TV has the
PAL colour system. It will change the
video signal of an NTSC disc and output
it to PAL format.
{ NTSC }
Select this if the connected TV has the
NTSC colour system. It will change the
video signal of a PAL disc and output it to
NTSC format.
{ Multi }
Select this if the connected TV is
compatible with both NTSC and PAL
(multi-system). The output format will
be in accordance with the video signal of
the disc.
Getting Started (continued)
TIPS: The underlined option is the factory default setting.
Press Wto go back to the previous menu item. Press SETUP to exit the menu.

19
English
DSelect one of the options and press OK
to conrm.
Follow the instructions shown on the
TV to conrm the selection (if any).
If a blank/distorted TV screen appears,
wait for 15 seconds for the auto
recovery.
Setting the TV Display
Set the aspect ratio of the DVD system
according to the TV type you have
connected. The format you select must
be available on the disc. If it is not, the
setting for TV display will not affect the
picture during playback.
AIn ‘DISC’ mode, press SETUP on the
remote control.
BPress Xrepeatedly to select { Video
Setup Page }.
CPress Tto highlight { TV Display },
then press X.
Video Setup Page
TV Type
TV Display
Progressive
Picture Setting
4:3Pan Scan
4:3Letter Box
16:9 Wide Screen
{ 4:3 Pan Scan }
Select this if you have a
conventional TV and
want both sides of the
picture to be trimmed or formatted
to t your TV screen.
{ 4:3 Letter Box }
Select this if you have a
conventional TV. In this
case, a wide picture with
black bands on the upper and lower
portions of the TV screen will be
displayed.
{ 16:9 Wide Screen }
Select this if you have a
wide-screen TV.
DSelect one of the options and press OK
to conrm.
Getting Started (continued)
TIPS: The underlined option is the factory default setting.
Press Wto go back to the previous menu item. Press SETUP to exit the menu.

20
English
Getting Started (continued)
TIPS: Press Wto go back to the previous menu item. Press SETUP to exit the menu.
Step 5: Setting up
Progressive Scan feature
(for Progressive Scan TV only)
The progressive scan displays twice the
number of frames per second than
interlaced scanning (ordinary normal TV
system). With nearly double the number
of lines, progressive scan offers higher
picture resolution and quality.
Before you start...
Ensure that you have connected this
DVD system to a progressive scan TV
using the Y Pb Pr connection (see
‘Option 2: Connecting to a Progressive
Scan TV or component video input’).
ATurn off your TV progressive scan mode
or turn on to the interlaced mode (refer
to your TV’s user manual).
BTurn on the DVD system and press
SOURCE button until “DISC” appears
on the display panel.
CTurn on the TV and set it to the correct
video-in channel.
The blue DVD background screen will
appear on the TV.
DPress SETUP on the remote control.
EPress Xrepeatedly to select { Video
Setup Page }.
FSelect { Progressive } > { On, } then
press OK to conrm.
Video Setup Page
TV Type
TV Display
Progressive
Picture Setting
On
Off
GRead the notication message on the TV
and conrm your action by selecting the
in the menu and press OK.
If a blank/distorted screen appears, wait
for 15 seconds for the auto recovery.

Otherwise, select { Cancel } and press
OK to go back to the previous menu.
There will be no picture on your TV
at this state until you have turned
on the progressive scan mode on
your TV.
HTurn on your TV progressive scan mode
(refer to your TV’s user manual).
A message appears on the TV.
IConrm your action by selecting the
in the menu and press OK.
 The setup is now completed and you
can start to enjoy the high quality picture.
If no picture is displayed:
APress OPEN CLOSE to open the disc
tray.
BPress Won the remote control.
CPress MUTE on the remote control.
Helpful Hint:
– There are some progressive scan TVs and
High-Denition TVs that are not fully
compatible with this unit, resulting in an
unnatural picture when playing back a DVD
VIDEO disc in the progressive scan mode. In
this case, turn off the progressive scan
feature on both the DVD system and your
TV.