Philips MCD750 User manual

Composite Video Cable
(yellow)
MCD750
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
1
Quick Start Guide
Quick start guide
2
User Manual
Remote control with two
AAA batteries
FM antenna User manual
Power adapter
MCD750 QSG_93_Eng 2010.3.31, 13:231

Tips
–See the User Manual for other TV
connection options.
–For connecting to a Progressive Scan
TV, refer to the user manual for proper
connections and detailed setup.
1
2
3
Setting up the TV
1
2
Press SOURCE on th e system (or DISC on the remote control) to select
disc source.
Turn on the TV and set it to the correct Video In channel.
4
Connect the speaker cables.
Connect the FM antenna.
Connect the composite video cable to a TV.
Connect the power cords of the system and TV.
Speaker
(right)
Speaker
(left)
FM antenna
AC power
2
3
4
AC power
4
1
MCD750 QSG_93_Eng 2010.3.31, 13:232

Setting the clock
1
2
3
4
In standby mode, press and hold CLOCK on the remote.
When the hour digits flash, turn VOL on the system or press VOL +/- on the remote
control to set the hours.
Press CLOCK again and the minute digits flash.Then turn VOL on the system or press
VOL +/- on the remote control to set the minutes.
Press CLOCK again to confirm the time setting.
Setting DVD menu options
IMPORTANT!
If the progressive scan feature is activated but the connected TV does not support
progressive signals or the cables are not connected accordingly, see the user
manual for proper progressive scan setup or deactivate the progressive scan
feature as below:
1) Turn off your TV progressive scan mode or turn on to interlaced mode.
2) Press SYSTEM MENU on the remote control to exit the system menu.Then
press DISC followed by “1” to exit progressive scan.
Tip
See chapters "Getting Started" and "System Menu Options" in the
User Manual for detailed descriptions.
DIVX (R) VOD
SPDIF SETUP
3D PROCESSING
AUDIO SYNC
QUALITY
MCD750 QSG_93_Eng 2010.3.31, 13:233

Playing a disc
Programming and tuning to radio stations
1
2
3
Press SOURCE on the system (or TUNER on the remote control) to select tuner
source.
Press PROGRAM on the remote control for more than two seconds to program all
available stations in order of waveband.
Press ¡/ ™until the desired preset station is displayed.
MCD750_93_QSG_V2.0
Tip
Detailed playback features and
additional functions are described in the
accompany owner's manual.
Notes for remote control:
– First, select the source you wish to control by
pressing one of the source select keys on the remote
control (DISC orTUNER, for example).
–Then select the desired function (
2; , í , ë for
example).
1
2
3
Press çto open the disc tray and load in a disc, then press the same button again to
close the disc tray.
➜Make sure the label side of the disc is facing up.
Playback will start automatically. If not pressÉÅ.
To stop playback, press 9.
1
2
3
Insert the USB device’s USB plug into the socket on the set.
Press SOURCE on the system (or USB on the remote control) to select USB.
Play the USB’s audio files as you do with the albums/tracks on a CD,
Playing a USB mass storage device
With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1),
USB flash players (USB 2.0 or USB1.1), memory cards (requires an additional card reader to
work with this Hi-Fi system).
MCD750 QSG_93_Eng 2010.3.31, 13:234