Philips 300WN5 User manual

Product Information
Product Features • Technical Specifications • Resolution & Preset Modes •
Philips Pixel Defect Policy • Automatic Power Saving • Physical Specification •
Pin Assignment • Product Views
Product Features
300WN5
z29.5-inch WXGA (1280x768 resolution, 176 degree viewing angle) LCD all-in-one
Monitor TV with excellent display performance
zMultiple video input allowing display of PC, TV, HDTV, VCD, DVD, Progressive DVD
and Camcorder
zNetwork controllability via RS232 interface for managing the performances, setting, etc.
zDigital High Definition Picture (1080i, 720p, 576p, 576i, 480p, 480i)
zDCDiTM de-interlacinf technology for superior depiction of motion
zPicture-in-Picture (PIP) function in PC VGA mode
zLight sensor to adjust brightness automatically
zTeletext (available only in Asia Pacific and Western Europe)
zDigital Nicam/2CS stereo (available only in Asia Pacific and Western Europe)
zComponent Video Input (YPbPr/YCbCr) for DVD (available in AV and TV models only)
zEuroconnector (SCART) (available in Western Europe)
zMultiSystem TV tuner-PAL/NTSC (available in TV model only)
RETURN TO TOP OF THE PAGE
Technical Specifications*
LCD PANEL
• Type TFT LCD
• Screen size 29.5 inch
• Pixel Pitch 0.5025 x 0.1675 mm x RGB
• LCD Panel type 1280 x 768 pixels
R.G.B. vertical stripe
Hard coating surface, anti-glare polarizer
• Effective viewing area (H) 643.2 x (V) 385.92mm
• Display Colors 8 bits interface (16.7M colors)
PC SCANNING
• Vertical refresh rate 58Hz-60Hz
• Horizontal frequency 31kHz-49kHz
PC VIDEO
• Video dot rate < 80 MHz
• Input impedance
2004/3/4file://W:\DFU\Philips\LCT-TV\300WN5\ENGLISH\300WN5\PRODUCT\PRODUCT.HTM
Installstion and Operating Instructions
Exhibit 3

- Video 75 ohm
- Sync 2.2K ohm
• Input signal levels 0.7 Vpp
• Sync input signal Separate sync
• Sync polarities Positive and negative
• Input Frequency WXGA Hsync 48 kHz, Vsync 60 Hz (N.I.)
SVGA Hsync 38 kHz, Vsync 60 Hz (N.I.)
VGA Hsync 31 kHz, Vsync 60 Hz (N.I.)
• Video interface D-sub, S-Video, TV-RF, SCART (Europe) or composite
and components video (others)
AUDIO
• Input level for
PC/SVHS/SCART 500 mV nominal
• Loudspeaker 5W Stereo Audio (2.5W/channel RMS x2, 200Hz~10kHz, 4
ohm, 10% THD)
OPTICAL CHARACTERISTICS
• Contrast ratio 500:1 (typ.)
• Brightness 500 cd/m2(typ.)
• Peak contrast angle 6 o'clock
• White Chromaticity x: 0.283 y: 0.297 (at 9300°K)
x: 0.313 y: 0.329 (at 6500°K)
x: 0.328 y: 0.344 (at 5700°K)
• Viewing Angle (C/R >5)
Upper >88° (typ.)
Lower >88° (typ.)
Left >88° (typ.)
Right >88° (typ.)
• Response time <=16ms (typ.)
sRGB
sRGB is a standard for ensuring correct exchange of colors between different devices (e.g.
digital cameras, monitors, printers, scanners, etc.)
Using a standard unified color space, sRGB will help represent pictures taken by an sRGB
compatible device correctly on your sRGB enabled Philips monitors. In that way, the colors
are calibrated and you can rely on the correctness of the colors shown on your screen.
Important with the use of sRGB is that the brightness and contrast of your monitor is fixed to
a predefined setting as well as the color gamut. Therefore it is important to select the sRGB
setting in the monitor's OSD.
To do so, at PC mode, open the OSD by pressing the MENU button of your monitor. Use the
down button to go to COLOR SETTINGS and press MENU again. Then move the down
Page 2 of 7Product Information
2004/3/4file://W:\DFU\Philips\LCT-TV\300WN5\ENGLISH\300WN5\PRODUCT\PRODUCT.HTM

* This data is subject to change without notice.
RETURN TO TOP OF THE PAGE
Resolution & Preset Modes
RETURN TO TOP OF THE PAGE
Automatic Power Saving
If you have VESA DPMS compliance display card or software installed in your PC, the monitor
can automatically reduce its power consumption when not in use. If an input from a keyboard,
mouse or other input device is detected, the monitor will then 'wake up' automatically. The
following table shows the power consumption and signaling of this automatic power saving
feature:
button to go to NORMAL COLOR and press MENU again.
For more information on sRGB, please visit: www.srgb.com
• Recommended 1280 x 768 at 60Hz
10 factory preset modes:
Resolution Mode H. freq (kHz) V. freq (Hz)
PC
640*480 VGA VESA 60 31.469 59.940
800*600 SVGA VESA 60 37.879 60.317
1024*768 XGA VESA 60 48.363 60.004
1280*768 GTF 60 47.700 60.000
Video
EDTV 480P 31.470 60.000
SDTV 480i 15.734 59.940
EDTV 576P 31.250 50.000
SDTV 576i 15.625 50.000
HDTV 1080i 33.750 60.000
HDTV 720P 45.000 60.000
Power Management Definition
Power LED
Page 3 of 7Product Information
2004/3/4file://W:\DFU\Philips\LCT-TV\300WN5\ENGLISH\300WN5\PRODUCT\PRODUCT.HTM

RETURN TO TOP OF THE PAGE
Physical Specifications
* This data is subject to change without notice.
RETURN TO TOP OF THE PAGE
Pin Assignment
1. The digital only connector contains 24 signal contacts organized in three rows of eigh
contacts. Signal pin assignments are listed in the following table:
VESA Mode Video H-sync V-sync Used color
ON Active Pulse Pulse 130W (typ.) Blue
OFF Blanked No No < 5W Amber
AC OFF Blanked No No < 2W Off
This monitor is ENERGY STAR®compliant. As an ENERGY STAR®Partner, PHILIPS
has determined that this product meets the ENERGY STAR®guidelines for energy
efficiency.
• Dimension (WxHxD) * 867.7mm x 505mm x 183mm (incl. Pedestal, Speakers)
726.7mm x 469.3mm x 115mm (w/o Pedestal, Speakers)
• Weight 16.0 kg (incl. Pedestal, Speakers)
14.0 kg (w/o Pedestal, Speakers)
15.0 kg (w/o Pedestal, Speakers; with protective cover)
• Power supply 90 — 264 VAC, 50/60 Hz
• Power consumption PC Mode: 130 W (typ.)
TV Mode: 150 W (typ.)
• Temperature (operating) 0° C to 35° C
• Relative humidity 20% to 80%
• System MTBF 50K hrs (excluding CCFL 40Khrs)
Pin
No. Signal
Assignment Pin
No. Signal
Assignment Pin No. Signal Assignment
1T.M.D.S. Data2- 9T.M.D.S. Data1- 17 T.M.D.S. Data0-
2T.M.D.S. Data2+ 10 T.M.D.S. Data1+ 18 T.M.D.S. Data0+
3T.M.D.S. Data2/4 11 T.M.D.S. Data1/3 19 T.M.D.S. Data0/5
Page 4 of 7Product Information
2004/3/4file://W:\DFU\Philips\LCT-TV\300WN5\ENGLISH\300WN5\PRODUCT\PRODUCT.HTM

2. The 15-pin D-sub connector (male) of the signal cable:
3. RS232 Connector
D-sub 9-pin male connector for communication with plasma engine or PC.
Shield Shield Shield
4No connect 12 No connect 20 No connect
5No connect 13 No connect 21 No connect
6DDC Clock 14 +5V Power 22 T.M.D.S. Clock
Shield
7DDC Data 15 Hot Plug Detect 23 T.M.D.S. Clock+
8No connect 16 Ground (for +5V) 24 T.M.D.S. Clock-
Pin
No. Assignment Pin No. Assignment
1Red video input 9DDC +5V
2Green video input 10 Cable detect
3Blue video input 11 Identical output,
connected to pin 10
4Ground 12 Serial data line (SDA)
5NC 13 H. Sync / H+V
6Red video ground 14 V. Sync
7Green video ground 15 Data clock line (SCL)
8Blue video ground
Pin No. RS-232 (EIA-232-A) Function
Page 5 of 7Product Information
2004/3/4file://W:\DFU\Philips\LCT-TV\300WN5\ENGLISH\300WN5\PRODUCT\PRODUCT.HTM

4. SCART Connector
3Transmit Data (TD) from DTE to DCE
2Receive Data (RD) from DCE to DTE
7Request to Send (RTS)
8Clear to Send (CTS)
6DCE Ready (DSR)
5Signal Ground (SG)
1Received Line Signal Detector (DCD)
4DTE Ready (DTR)
9Ring Indicator
Pin No. Signal Pin No.
1Audio right channel output (0.5 Vrms, < 1K
ohms) 2
2Audio right channel input (0.5 Vrms, > 10K
ohms) 1
3Audio left channel output (0.5 Vrms, < 1K
ohms) 6
4Audio ground 4
5Blue signal ground 5
6Audio left channel input (0.5 Vrms, > 10K
ohms) 3
7Blue signal I/O (0.7 Vp-p, 75 ohms) 7
8Function switching I/O (L: < 2V, H: > 10V,
10K ohms) 8
9Green signal ground 9
10 Intercommunication data line No. 1 10
11 Green signal I/O (0.7 Vp-p, 75 ohms) 11
12 Intercommunication data line No. 2 12
13 Red signal ground 13
14 Blanking signal ground 14
15 Red signal I/O (0.7 Vp-p, 75 ohms) 15
16 Blanking signal I/O (L: < 0.4V, H: >1.0V, 75
ohms) 16
17 Composite video signal ground 18
Page 6 of 7Product Information
2004/3/4file://W:\DFU\Philips\LCT-TV\300WN5\ENGLISH\300WN5\PRODUCT\PRODUCT.HTM

RETURN TO TOP OF THE PAGE
Product Views
Follow the links to see various views of the monitor and its components.
Product Description
RETURN TO TOP OF THE PAGE
18 Blanking signal ground 17
19 Composite video signal output (1 Vp-p, 75
ohms, sync: negative) 20
20 Composite video signal input (1 Vp-p, 75
ohms, sync: negative) 19
21 Plug shield (common ground) 21
Page 7 of 7Product Information
2004/3/4file://W:\DFU\Philips\LCT-TV\300WN5\ENGLISH\300WN5\PRODUCT\PRODUCT.HTM

Installing your LCD Monitor/TV
Product Description • Connecting to Your PC, TV antenna, DVD/VCR etc. • Getting Started
Performance
Product Description
Side View (Left)
RETURN TO TOP OF THE PAGE
Rear View
TV version
1INPUT Selecting input source
2
Increase or decrease the channel number
or
moving up or down to highlight the function in OSD
3
Increase or decrease the level of audio volume
or
moving left or right of to highlight the sub-menu in the selected
function of OSD
4MENU Open the OSD or confirm the selected function
5DC power switch On/Off
Page 1 of 7Installing your LCD Monitor/TV
2004/3/4file://W:\DFU\Philips\LCT-TV\300WN5\ENGLISH\300WN5\INSTALL\INSTALL.HTM

RETURN TO TOP OF THE PAGE
Audio/Video version
1AC IN AC power in
2AC Power AC power switch
3D-Sub PC analog D-Sub input
4PC - Audio PC Stereo input
5DVI-D PC
6RS232 RS232 network connection
7External/
EURO-AV SCART connection (for Europe only)
8Composite Video Output Composite video CVBS ouput
9Audio (L) Output Audio (L) output
Audio (R) Output Audio (R) output
10 Audio (L) Output Audio (L) output for the detachable speaker (L)
Audio (R) Output Audio (R) output for the detachable speaker (R)
11 Line out Audio output for external speakers
Page 2 of 7Installing your LCD Monitor/TV
2004/3/4file://W:\DFU\Philips\LCT-TV\300WN5\ENGLISH\300WN5\INSTALL\INSTALL.HTM

RETURN TO TOP OF THE PAGE
Monitor version
1AC IN AC power in
2AC Power AC power switch
3D-Sub PC analog D-Sub input
4PC - Audio PC Stereo input
5DVI-D PC
6RS232 RS232 network connection
7External/
EURO-AV SCART connection (for Europe only)
8Audio (L) Output Audio (L) output for the detachable speaker (L)
Audio (R) Output Audio (R) output for the detachable speaker (R)
9Line out Audio output for external speakers
Page 3 of 7Installing your LCD Monitor/TV
2004/3/4file://W:\DFU\Philips\LCT-TV\300WN5\ENGLISH\300WN5\INSTALL\INSTALL.HTM