Philips 32HFL4441D/27 Instruction manual

Register your product and get support at
www.philips.com/welcome
32HFL4441D/27
32HFL4461F/27
37HFL4481F/27
EN Quick User Guide

1
1 How to use this guide
TheQuickStartGuidehelpsyouinstallthePhilipscommercial
television,asquicklyaspossible.Itcontainsthenecessaryinformation
toinstalltheTVandcongurethesettings.Readandunderstandthe
instructionsintheQuickStartGuidebeforeyouuseyourTV.
Fordetailedinformationonadditionalfeatures,downloadtheuser
manualbyselectingyourTVmodelatwww.philips.com/hospitality.
TheQuickStartGuidecontainsthefollowinginformation:
• contentsofthebox
• standaloneinstallationinstructions
• congurationofchannel,advancedandSmartFeatures
settings
• cloningofdata
• troubleshooting
OSS declaration
Open source software
Thistelevisioncontainsopensourcesoftware.PhilipsBUHospitality
herebyofferstodeliverormakeavailable,uponrequest,foracharge
nomorethanthecostofphysicallyperformingsourcedistribution,a
completemachine-readablecopyofthecorrespondingsourcecodeon
amediumcustomarilyusedforsoftwareinterchange.
Toobtainthesourcecode,writeto:
PhilipsSingaporePteLtd.
PhilipsBUHospitality
SoftwareDevelopmentManager
620ALorong1,ToaPayoh
Singapore319762
Thisofferisvalidforthreeyearsafterthedateofpurchaseofthis
product.
Energy savings mode
ThisTVisconguredinEnergySavingsmode.
• ThismodewilldisablethesidecontrolkeysoftheTVandresultina
longerturnontime.TooptimizetheTVperformance,adjusttheLOW
POWERSTANDBYsettinginTVSETUPmenu.
• Formoredetails,refertotheinformationonconguringtheLOW
POWERSTANDBYfeature(see‘CongureSmartPowersettings’onpage
7).
English
EN

2
2 The contents of the box
Theboxcontainsthefollowingitems:
• whichsecuretheTVstandtothefurnitureofthehotelroomto
preventunauthorizedremovalortheft
• desk-to-standscrews(2)*
• desk-to-standwashers(2)*
• desk-to-standsecuregroovenuts(2)*
• whichsecuretheTVstandtotheTVtopreventunauthorized
removalortheft
• stand-to-TVsecurescrews(4)*
• stand-to-TVcross-headscrews(4)*
• theTV
• theTVstand
• QuickStartGuide
• 2-pinpowercord
• Guestremotecontrol*
Note
• *Theitemsareavailableinselectedmodelsonly.
Note
• Thetoolsrequiredtosecurethescrewsarenotincludedinthebox.
ContactyourPhilipsauthorizedagentordealerinNAFTAtoobtainthe
tools.
EN
x 4
x 2 x 2
x 2
x 4
(Available in selected models only)
(Available in selected models only)
(Available in selected models only)

3
• Press Poweronthesetupremotecontrol.
5 PressMonthesetupremotecontroltodisplaythesetupmenu.
6 Press toselectAUTO INSTALL TV.
7 Press tostarttheautomaticinstallationofchannels.
»Afterthechannelsareinstalled,youcanchangethesettingsof
thechannels,picture,sound,andvolume.
3
4
2
1
MENU
POWER
SLEEP
SMART
GUEST
DCM
SETUP
TEXT
RECALL
CC
8
1
4 5 6
79
2 3
COMMUNICATION >
USE CHANNEL TABLE YES
CURRENT RING
DIGITAL SETUP
SETUP
CABLE TUNING YES
CHANNEL INSTALL >
CONFIGURATION
SMARTCLONE
>
>
>
RING2
LANGUAGE ENGLISH
AUTO INSTALL TV >
3 Standalone installation
ThissectiondescribeshowtoinstalltheTVchannelsautomatically.
1 ConnecttheRFsignalfromthewallsockettotheTV.
2 Plugthe2-pinpowercordintothepoweroutlet.
3 SettheswitchatthesideofthesetupremotecontroltoSETUP.
Note
• Thesetupremotecontrolisnotincludedinthebox.ContactyourPhilips
authorizedagentordealertoobtaintheremotecontrol.
4 TurntheTVon.
• Press POWERatthesideoftheTV.
TV ANTENNA
Cable
M
POWER
SLEEP
GUIDE
SMART
GUEST
DCM
SETUP
TEXT
RECALL
HCLOV
CC
RESET CH
8
0
1
4 5 6
79
2 3
M
A/CH
++
+
_
SETUP
English
EN

4
4 Press0-9(Numeric buttons)toenterthephysicalchannel
number.
5 Press tosettheMPEG PROGRAM NUMBERtoaparticular
programinthephysicalchannel.
6 Press0-9(Numeric buttons)toentertheprogramnumber.
Note
• YoucanalsoselectDIGITAL CH SCROLLandpress toselectthe
digitalchannelnumbers.
Select a ring
1 PressMonthesetupremotecontroltodisplaythesetupmenu.
2 Selectthechannelthatyouwanttosaveinaringandtheinput
source(see‘Manualinstallationofanalogchannels’onpage4).
3 Press toselectCHANNEL INSTALL > RINGS.
4 Press toselectaringnumber.
»Aashingreddashappearsnexttotheselectedring.
5 Press tosaveorremoveachannelfromthering.
»Theringismarkedbyan‘X’whenthechannelissavedinit.
6 Press toselectacategoryoption(HIGH DEFINITION,
SPORTS,NEWS,etc)tosavethechannel.
7 Press toselectYES tosavethechanneltothiscategoryor
NOtoremovethechannel.
CHANNEL TV 2
INPUT TUNER
LABEL
( ) >
MUTE
NONE
CHANNEL INSTALL
DIGITAL CH SCROLL
CHANNEL LOGO >
RF CHANNEL NUMBER
MPEG PROGRAM NUMBER
>
2
8
DIGITAL YES
RINGS >
HIGH DEFINITION
RINGS
SPORTS
NEWS YES
KIDS YES
MOVIES YES
NETWORK YES
ADULT YES
LIFESTYLE YES
OTHERS NO
NO
YES
CHANNEL RINGS (1X)(2 )(3 )(4 )
4 Change the channel
settings
Thissectiondescribeshowtochangethechannelsettings.
Manual installation of analog channels
1 PressMonthesetupremotecontroltodisplaythesetupmenu.
2 Press toselectCHANNEL INSTALL > CHANNEL.
3 Press0-9(Numeric buttons)toselectachannel.
• Forcablemode,selectanumberbetween01-250.
• Forantennamode,selectanumberbetween02-250.
4 Press toselectINPUT,andthenpress toselectthesource
ofinput.
Manual installation of digital channels
1 PressMonthesetupremotecontroltodisplaythesetupmenu.
2 Press toselectCHANNEL INSTALL > DIGITAL > YES.
3 Press tosettheRF CHANNEL NUMBERtothephysical
channelnumber.
INPUT TUNER
DIGITAL NO
RINGS
LABEL ( ) >
>
MUTE NONE
CHANNEL INSTALL
RF CHANNEL NUMBER 2
MPEG PROGRAM NUMBER 8
CHANNEL LOGO >
CHANNEL TV 2
CHANNEL TV 2
INPUT TUNER
RINGS
LABEL
( ) >
>
MUTE
NONE
CHANNEL INSTALL
DIGITAL CH SCROLL
CHANNEL LOGO >
RF CHANNEL NUMBER
MPEG PROGRAM NUMBER
>
2
8
DIGITAL YES
EN

5
3 Press tosetthefollowingvalues:
• WELCOME MESSAGE:Setsorclearsawelcomemessage.
• SWITCH ON CHANNEL:Setsachannelthatisdisplayed
whentheTVisturnedon.
• SWITCH ON SMARTGUIDE:Setsthedisplayof
SmartGuidecategoriesscreenwhentheTVisturnedon.
• SWITCH ON VOLUME:Speciesthevolumeatwhichthe
TVisturnedon.
• SWITCH ON PIC FMT:Setsthepictureformatthatisused
todisplay.
• POWER ON:Setsthepowermodethatisusedwhenthe
TVisturnedon.
• VOLUME INDICATOR:Setsthedisplayofvolume
indicator.
• CHANNEL DISPLAY:Setsthedisplayofchannelnumber
andchannelnameonthescreen.
Congure the picture and sound settings
1 PressMonthesetupremotecontroltodisplaythesetupmenu.
2 Press toselectCONFIGURATION > PICTURE/
SOUND.
3 Press toadjustasettingforyourTV.
SWITCH ON CHANNEL TV 2
SWITCH ON PIC FMT WIDESCREEN
POWER ON
VOLUME INDICATOR
SWITCH ON VOLUME 30
WELCOME MESSAGE
LAST STATUS
YES
SWITCH ON SMARTGUIDE YES
SWITCH ON / OSD
>
CHANNEL DISPLAY ALL
COLOR 38
SHARPNESS 50
TINT
ACTIVE CONTROL
PICTURE / SOUND
CONTRAST 70
BRIGHTNESS 45
36
YES
TREBLE
BASS
BALANCE
AVL
52
55
0
ON
5 Configure advanced
settings
Thissectiondescribeshowtoconguretheadvancedsettingsforthe
TVsuchasvolume,channel,pictureformat,powermode,picture,sound,
security,control,ratings,andhotelinformation.
Access the conguration menu
1 PressMontheremotecontroltodisplaythesetupmenu.
2 Press toselectCONFIGURATION.
3 Press toselectoneofthefollowingtocongurethe
settings:
• SWITCH ON/OSD:Setsthedefaultvalueforsettingssuch
asvolume,channel,pictureformat,andpowermode.These
valuesareusedwhentheTVisswitchedon.
• PICTURE/SOUND:Setsthepictureandsoundsettingsfor
theTV.
• SECURITY:Setsthelevelofsecuritybyconguringthe
settingssuchas,TVlock,RClockanddecryptioncontrol.
• CONTROL:SetsthecontrolsettingssuchasESP,Smart
Guide,andMaxVolume.
• SMARTFEATURES:SetstheSmartPower,USBbreak-
in,SmartGuideCategory,SmartUpdate,andsoftware
downloadsettings.
• AUDIO FEATURES:Setsthecorrectaudiosource.
• CC/V-CHIP:Setstheclosedcaptionsettingsandratings.
• HOTEL INFORMATION:Setthehotelinformation
includinghotelnameandroomnumber.
Congure the switch-on settings
1 PressMonthesetupremotecontroltodisplaythesetupmenu.
2 Press toselectCONFIGURATION > SWITCH ON/
OSD.
PICTURE / SOUND >
CONTROL >
SMARTFEATURES
AUDIO FEATURES
CONFIGURATION
SECURITY >
SWITCH ON / OSD
>
>
CC / V-CHIP >
HOTEL INFORMATION >
>
English
EN

6
Congure the control settings
1 PressMonthesetupremotecontroltodisplaythesetupmenu.
2 Press toselectCONFIGURATION > CONTROL >
MAX VOLUME.
3 Press toadjustthemaximumvolumefortheTV.
4 Press toadjustothercontrolsettingsfromthismenu.
DIGIT TIMEOUT 3.0
SOURCE MENU ITEM
PIC FMT MENU ITEM
CONTROL
3 DIGIT ENTRY NO
ESP OFF
NO
NO
SMART GUIDE
MIN VOLUME
MAX VOLUME
NO
0
12
EN

7
Congure SmartGuide Categories
This section provides information to congure SmartGuide Categories
icons. Guests can access these icons by pressing the CHANNEL
GUIDE button on the guest remote control to display the SmartGuide
Categories screen. Refer to the previous chapter for information to
assign TV channels to categories (see ‘Select a ring’ on page 4).
1 Press M on the setup remote control to display the setup menu.
2 Press to select CONFIGURATION > SMARTFEATURES
> SMARTGUIDE CATEGORIES.
3 Press to select one of the following to congure the
settings:
• CHANNEL GUIDE KEY: Sets the default screen that will be
shown when you press the CHANNEL GUIDE button on the
remote control. Select between SMARTGUIDE categories or
CHANNEL LIST screen.
• HIGH DEFINITION: Enables or disables the high denition icon
in the SmartGuide Categories screen.
• SPORTS: Enables or disables the sports icon in the SmartGuide
Categories screen.
• NEWS: Enables or disables the news icon in the SmartGuide
Categories screen.
• KIDS: Enables or disables the kids icon in the SmartGuide
Categories screen.
• MOVIES: Enables or disables the movies icon in the SmartGuide
Categories screen.
• NETWORK: Enables or disables the network icon in the
SmartGuide Categories screen.
• ADULT: Enables or disables the adult icon in the SmartGuide
Categories screen.
• LIFESTYLE: Enables or disables the lifestyle icon in the
SmartGuide Categories screen.
• OTHERS: Enables or disables the others icon in the SmartGuide
Categories screen.
Congure SmartSecure settings
1 Press M on the setup remote control to display the setup menu.
2 Press to select CONFIGURATION > SECURITY >
SMARTSECURE.
LOW POWER STANDBY
SMARTFEATURES
SMARTPOWER OFF
NO
AUTOSENSE NO
USB BREAK-IN
SW DOWNLOAD
NO
SMARTUPDATE NO
>
SMARTGUIDE CATEGORIES >
6 Configure SmartFeatures
settings
Congure SmartPower settings
Philips continuously focuses on lowering the environmental impact
of its consumer products by adopting energy efcient ways of power
management.
This section describes how to select a setting for maximum power
savings.
1 Press M on the setup remote control to display the setup menu.
2 Press to select CONFIGURATION > SMARTFEATURES.
3 Press to select one of the following to congure the
settings:
• SMARTPOWER: Sets a power saving mode. Select one of the
following :
• OFF: Rich and dynamic settings, ideal for daylight use.
Disables power savings.
• LOW: A natural picture setting. Achieves low power savings.
• MEDIUM: Ideal settings for watching movies. Achieves
medium power savings.
• HIGH: Applies low-energy settings. Achieves highest
possible power savings.
• AUTOSENSE: Reduces the TV’s power consumption according
to the room’s ambient light. Select YES to enable the TV’s built-
in ambient light sensor. AUTOSENSE ia available in selected
models only.
• LOW POWER STANDBY: Uses minimum power when the TV
is in standby mode.
Note
• If LOW POWER STANDBY is set to YES,
• the TV can only be switched on with a remote control. Please ensure the
remote control is always available. The control buttons at the side of the
TV will not be able to switch on the TV.
• If LOW POWER STANDBY is set to YES, the TV will be congured to
the optimal energy saving mode whenever the TV is switched to standby
mode. As a result, the TV will take a little longer to switch on again. If you
need a fast switch on time, select NO.
LOW POWER STANDBY
SMARTFEATURES
SMARTPOWER OFF
NO
AUTOSENSE NO
USB BREAK-IN
SW DOWNLOAD
NO
SMARTUPDATE NO
>
SMARTGUIDE CATEGORIES >
English
EN

8
3 Press toenableordisableSmartSecure.
4 Press toselecttheSmartSecurechannel.
»TheTVchecksfortheSmartSecureIDwhenturnedon.
5 Press toadjustothersecuritysettingsonthismenu.
Note
• SMARTSECUREmustbeusedwithaPhilipsSmartGateway(PSG)
device.DonotenableSMARTSECUREunlessthePSGhasbeen
conguredatyourlocation.FormoreinformationonthePSG,contact
yourPhilipsauthorizedagentordealer.
REMOTE CONTROL LOCK
SECURITY
SECURITY STANDARD
NO
KEYBOARD LOCK NO
SMARTSECURE >
DECRYPTION CONTROL >
EN