Philips 32PFL1507 User manual

Registeryourproductandgetsupportat
www.philips.com/support
32PFL1507
MODEL NUMBER SERIAL NUMBER
EN UserManual
ES ManualdelUsuario
EN: Forfurtherassistance,callthecustomersupportserviceinyourcountry.
• To obtain assistance, contact Philips Customer Care Center at
México D.F. and Área Metropolitana; 58879736
Interior de la Republica; 018008391989
Costa Rica; 018000521564
Colombia; 018009520640
ES: Paraobtenermásinformación,llamealserviciodesoportealclientedesu
país.
• Para obtener asistencia, póngase en contacto con CENTRO DE INFORMACION AL CLIENTE,
México D.F. y Área Metropolitana; 58879736
Interior de la Republica; 018008391989
Costa Rica; 018000521564
Colombia; 018009520640
Leaestamanualantesdeusarelproducto

Contents
1 Notice 4
2 Important 5
Product information 5
Screen care 5
Environmental care 5
Regulatory notices 5
3 YourTV 6
Front controls and indicators 6
Remote control 7
4 Getstarted 8
Supplied accessories 8
Mounting stand onto TV 8
Positioning the TV 8
Installing the remote control batteries 8
Connecting the antenna or cable 9
Plugging in the AC power cord 10
Switching on and initial setup 11
5 UseyourTV 12
Switching on your TV and putting it in standby mode 12
Switching channels 12
Adjusting volume 13
Still mode 13
Watching channels from a set-top box 13
Watching connected devices 13
Watching a Blu-ray disc 14
Switching audio mode 14
6 UsemoreofyourTV 15
Changing picture and sound settings 15
Sleeptimer 18
Child and rating locks 18
Closed caption 20
EasyLink 21
ECO 21
Set your location to home 21
Viewing photos and watching videos on a USB storage device 22
7 Installchannels 24
Selecting your menu language 24
Autoprogram 24
Channel list 25
Add channels 25
Optimizing the signal quality from your antenna 25
8 UpgradeyourTVsoftware 26
Checking your current software version 26
Preparing for the software upgrade 26
Upgrading software 26
9 Connectdevices 27
Connection overview 27
Selecting your connection quality 28
Connecting your devices 29
10 Troubleshooting 31
Downloading an electronic copy 31
Contact us 31
11 NotesfortheuseofUSBdevices 32
12 Specications 32
13 Index 33
English
1

Know these safety symbols The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the apparatus’s enclosure
that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the apparatus.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Apparatus shall
not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the
apparatus.
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
ATTENTION : Pour éviter les choc électriques,introduire la lame la plus large de la fiche dans la borne correspondante de la
prise et pousser jusqu’au fond.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The caution marking is located on the rear or bottom of the cabinet.
CAUTION
*Product Safety Notification *Additional Benefits
By registering your product, you'll receive notification -
directly from the manufacturer - in the rare case of a
product recall or safety defect.
Registering your product guarantees that you'll receive
all of the privileges to which you're entitled, including
special money-saving offers.
Registering your model with Philips makes you eligible for all of the valuable benefits listed below, so don't miss out.
Complete and return your Product Registration Card at once or visit at www.philips.com/support to ensure:
Visit our World Wide Web Site at www.philips.com/support
Return your Product Registration Card or visit at
http://www.productrecords.com/philips/ today to get the very most from your purchase.
www.CE.org/safety
English
2

Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your
safety. If the provided plug does not t into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11. Only use attachments / accessories specied by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specied
by the manufacturer, or sold with the apparatus. When a cart
is used, use caution when moving the cart / apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualied service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
NotetotheCATVsysteminstaller:
This reminder is provided to call the CATV system installer’s attention
to Article 820-40 of the NEC that provides guidelines for proper
grounding and, in particular, species that the cable ground shall be
connected to the grounding system of the building, as close to the point
of cable entry as practical.
ExampleofAntennaGroundingasperNEC−National
ElectricCode
ANTENNADISCHARGEUNIT(NECSECTION810-20)
GROUNDINGCONDUCTORS(NECSECTION810-21)
POWERSERVICEGROUNDINGELECTRODE
SYSTEM(NECART250,PARTH)
ANTENNALEADINWIRE
GROUNDCLAMPS
ELECTRICSERVICEEQUIPMENT
GROUNDCLAMP
WallMountBracketKit
Brand: SanusVuepoint
Model # Screw dimension
32PFL1507 F55 M4 x 0.787” (20mm)
+
Washer 0.078”(T2mm)
Screws w/washers are required. (sold separately)
Do NOT use screws
packed with Wall Mount Bracket Kit.
Youneedtopurchasescrewsseparately
withdimensionsdescribedabove.
• The recommended Wall Mount Bracket Kit (sold separately)
allows the mounting of the TV on the wall.
• For detailed information on installing the wall mount, refer to the
Wall Mount Instruction Book.
• P&F Mexicana is not responsible for any damage to the product
or injury to yourself or others if you elect to install the TV Wall
Mount Bracket or mount the TV onto the Bracket on your own.
• The Wall Mount Bracket must be installed by experts.
P&FMexicanaisnotliableforthesetypesofaccidentsor
injurynotedbelow.
• Install the Wall Mount Bracket on a sturdy vertical wall.
• If installed onto a ceiling or slanted wall, the TV and Wall Mount Bracket
may fall which could result in a severe injury.
• Do not use screws that are longer or shorter than their specied length.
If screws too long are used this may cause mechanical or electrical
damage inside the TV set. If screws too short are used this may cause the
TV set to fall.
• Do not fasten the screws by excessive force. This may damage the
product or cause the product to fall, leading to an injury.
• For safety reasons use 2 people to mount the TV onto a Wall
Mounting Bracket.
• Do not mount the TV onto the Wall Mounting Bracket while your TV
is plugged in or turned on. It may result in an electrical shock injury.

Wheninstallingtheunitonthewall,allowthismuchspace.
Top: 11.8 inches (30cm)
Leftandrightside: 5.9 inches (15cm)
Bottom: 3.9 inches (10cm)
English
3

Modications
This apparatus may generate or use radio frequency energy. Changes or
modications to this apparatus may cause harmful interference unless
the modications are expressly approved in the User Manual. The user
could lose the authority to operate this apparatus if an
unauthorized change or modication is made.
Cables
Connections to this device must be made with shielded cables with
metallic RFI / EMI connector hoods to maintain compliance with FCC
Rules and Regulations.
Copyright
All other registered and unregistered trademarks are the property of
their respective owners.
The terms HDMI and HDMI High-Denition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
Portions of this software are copyright © The FreeType Project
(www.freetype.org).
The American Academy of Pediatrics discourages television viewing for
children younger than two years of age.
1 Notice
Trademarks are the property of Koninklijke Philips Electronics N.V. or
their respective owners.
P&F Mexicana reserves the right to change products at any time without
being obliged to adjust earlier supplies accordingly.
The material in this User Manual is believed adequate for the intended
use of the system. If the product or its individual modules or procedures
are used for purposes other than those specied herein, conrmation
of their validity and suitability must be obtained. P&F Mexicana warrants
that the material itself does not infringe any United States patents. No
further warranty is expressed or implied.
P&F Mexicana cannot be held responsible neither for any errors in
the content of this document nor for any problems as a result of the
content in this document. Errors reported to P&F Mexicana will be
adapted and published on the P&F Mexicana support website as soon
as possible.
Pixelcharacteristics
This LCD product has a high number of color pixels. Although it has
effective pixels of 99.999% or more, black dots or bright points of light
(red, green or blue) may appear constantly on the screen. This is a
structural property of the display (within common industry standards)
and is not a malfunction.
Warranty
No components are user serviceable. Do not open or remove covers
to the inside of the product. Repairs may only be done by Service
Centers and ofcial repair shops. Failure to do so shall void any warranty,
stated or implied.
Any operation expressly prohibited in this User Manual, any adjustments
or assembly procedures not recommended or authorized in this
User Manual shall void the warranty.
FederalCommunicationsCommissionNotice
Thisequipmenthasbeentestedandfoundtocomplywiththelimits
foraClassBdigitaldevice,pursuanttopart15oftheFCCRules.
Theselimitsaredesignedtoprovidereasonableprotectionagainst
harmfulinterferenceinaresidentialinstallation.Thisequipment
generates,usesandcanradiateradiofrequencyenergyand,ifnot
installedandusedinaccordancewiththeinstructions,maycause
harmfulinterferencetoradiocommunications.However,thereisno
guaranteethatinterferencewillnotoccurinaparticularinstallation.If
thisequipmentdoescauseharmfulinterferencetoradioortelevision
reception,whichcanbedeterminedbyturningtheequipmentoffand
on,theuserisencouragedtotrytocorrecttheinterferencebyone
ormoreofthefollowingmeasures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio or television technician
for help.
DeclarationofConformity
TradeName: PHILIPS
ResponsibleParty: P&F Mexicana, S.A. de C.V.
Model: 32PFL1507
Address: Av. La Palma No. 6, Col. San Fernando La
Herradura. Huixquilucan, Edo. de México.
C.P. 52787
TelephoneNumber: 52 (55) 52 69 90 00
English
4

Environmentalcare
The packaging of this product is intended to be recycled. Contact your
local authorities for information about how to recycle the packaging.
For product recycling information, please visit - www.recycle.philips.com
Endoflifedirectives
This LCD TV contains a lamp with Mercury, please dispose of according
to all local, state and federal laws.
Philips pays a lot of attention to produce environment-friendly products
in green focal areas. Your new TV contains materials which can be
recycled and reused. At the end of its life, specialized companies can
dismantle the discarded TV to concentrate the reusable materials and to
minimize the amount of materials to be disposed of. Please ensure you
dispose of your old TV according to local regulations.
Disposalofusedbatteries
The batteries supplied do not contain the heavy metals mercury and
cadmium. Nevertheless, in many areas batteries may not be disposed
of with your household waste. Please ensure you dispose of batteries
according to local regulations.
Regulatorynotices
Do not place the unit on the furniture that is capable of being tilted by a
child and an adult leaning, pulling, standing or climbing on it. A falling unit
can cause serious injury or even death.
This apparatus should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided.
Make sure to leave a space of 4 inches (10cm) or more around this
apparatus.
Press . POWER to turn the unit on and go into standby mode.
To completely turn off the unit, you must unplug the AC power cord.
Disconnect the AC plug to shut the unit off when trouble is found or
not in use. The AC plug shall remain readily available.
NeveruseagasdusteronthisTV.
Thegastrappedinsideofthisunitmaycauseignitionandexplosion.
CAUTION: Dangerofexplosionifbatteryisincorrectlyreplaced.
Replaceonlywiththesameorequivalenttype.
WARNING: Batteries(batterypackorbatteryinstalled)shallnotbe
exposedtoexcessiveheatsuchassunshine,reorthe
like.
WARNING: Topreventinjury,thisapparatusmustbesecurely
attachedtothefurniture/wallinaccordancewiththe
instructions.Tipping,shakingorrockingtheunitmay
causeinjury/death.
2 Important
Registering your model with Philips makes you eligible for all of the
valuable benets listed below, so don’t miss out.
Complete and return your Product Registration Card at once, or
register online at www.philips.com/support to ensure :
• Product Safety Notication
By registering your product you receive notication - directly from
the manufacturer - in the rare case of a product recall or safety
defect.
• Additional Benets of Product Ownership
Registering your product guarantees that you receive all of the
privileges to which you’re entitled, including special money-saving
offers.
Productinformation
This TV consumes minimal energy in standby mode to minimize
environmental impact. The active power consumption is given on the
type plate at the back of the TV. The model and serial numbers of your
TV can be found on the back and right side of the TV as well as on the
packaging.
Screencare
• Avoid stationary images as much as possible. Stationary images
are images that remain on-screen for extended periods of time.
Examples include : on-screen menus, black bars and time displays.
If you must use stationary images, reduce screen contrast and
brightness to avoid screen damage.
• Unplug the TV before cleaning.
• Clean the TV screen and frame with a soft cloth. Never use
substances such as alcohol, chemicals or household cleaners on the
TV screen.
• Risk of damage to the TV screen! Never touch, push, rub or strike
the screen with any object.
• To avoid deformations and color fading, wipe off water drops as
soon as possible.
English
5

3 YourTV
Congratulations on your purchase, and welcome to Philips! To fully
benet from the support that Philips offers, register your product at
www.philips.com/support
Frontcontrolsandindicators
b
a
c d e f
a Standbyindicator/remotecontrolsensor
b VOL◄/►
Increases or decreases volume.
c MENU
Toggles the main menu on or off.
d SOURCE
Selects connected devices.
e CH▲/▼
Switches to the next or previous channel.
f. (POWER / STANDBY-ON)
Switches the TV on or puts it in standby mode. The TV is not
powered off completely unless it is physically unplugged.
English
6

a. (POWER / STANDBY-ON)
Switches the TV on or puts it in standby mode. The TV is not
powered off completely unless it is physically unplugged.
b SOURCE
Selects connected devices.
c FORMAT
Selects a picture format (see ‘Changing picture format’ on page 16).
d SAP
  DigitalMode(DTV)
• Press to select the audio language.
  AnalogMode(TV)
• Press to select the audio mode.
e FREEZE
Press to pause screen image.
f OK
Activates a selection or accesses the menu.
gÎ ï Í Æ(Navigationbuttons)
Navigates through the menus.
h INFO
Displays information about the TV channel or accessory device.
The quality and accuracy of the information depends on the
broadcaster. You might see a difference in broadcast time if the
broadcast is from a different time zone.
i CH+/−
Switches to the next or previous channel.
j MUTE
Mutes or unmutes audio.
k Numberbuttons
Select a channel, page or setting.
l•
(Dot)
Press the dot (•) for digital channels.
m PREVCH
Returns to the previously viewed channel.
n VOL+/−
Increases or decreases volume.
o MENU/EXIT
Turns the menu on or off.
p BACK
Returns to a previous screen.
q AUTOSOUND
Cycles through preset sound settings
(see ‘Changing auto sound mode’ on page 17).
r AUTOPIC
Cycles through preset picture settings
(see ‘Changing auto picture mode’ on page 15).
s SLEEP
Sets a delay after which the TV switches to standby.
Remotecontrol
*
b
c
a
d
e
ho
p
r
q
s
i
j
k
lm
n
g
f
*This button does not function on this unit.
English
7

PositioningtheTV
• Large screen TVs are heavy. 2 people are required to carry and
handle a large screen TV.
• Make sure to hold the upper and bottom frames
of the unit rmly as illustrated.
• Install the unit in a horizontal and stable position.
• Do not install the unit in direct sunlight or in a
place subject to dust or strong vibration.
• Depending on the environment, the temperature
of this unit may increase slightly. This is not a
malfunction.
• Avoid a place with drastic temperature changes.
• Do not place anything directly on top or bottom of the unit.
• Depending on your external devices, noise or disturbance of the
picture and / or sound may be generated if the unit is placed too
close to them. In this case, please ensure enough space between the
external devices and the unit.
• Do not insert the AC power cord into the power socket outlet
before all the connections are made.
• Ensure that you always have easy access to the AC power cord or
plug to disconnect the TV from the power.
• Before you move the TV, disconnect attached cables to prevent
damage to connectors.
• Be sure to unplug the AC power cord from the AC outlet before
moving or carrying the unit.
Installingtheremotecontrolbatteries
1 Slide the battery cover off the back of the remote control.
2 Insert the 2 supplied batteries (AAA, 1.5V). Be sure the + and −
ends of the batteries line up with the markings inside the case.
3 Slide the cover back into position.
Note
• Remove the batteries if not using the remote control for an extended period of time.
4 Getstarted
Suppliedaccessories
• Remote Control
• 2 x AAA, 1.5V Batteries
• M4 x 14 double sems screw x 3
• User Manual
• Quick Start Guide
MountingstandontoTV
Applicable to TVs without mounted stands.
1
2
1
1
2
2
2
1
1
2
x3
Note
• To wall mount the TV, refer to the Quick Start Guide.
• If you lose the stand mounting screws, please purchase 3 Phillips head screws
(M4 × 14) at your local store.
English
8

Ifyouconnectaset-topboxthroughRFIN/OUT
If the TV is connected to a cable box or satellite set-top box via a
coaxial connection, set the TV to channel 3 or 4, or to the channel
specied by the service provider.
IN
ININ OUT
set-topbox
RFcable
antenna
RFcable
Ifyouconnectaset-topboxthroughHDMI
If the TV is connected to a cable box or satellite set-top box via HDMI,
make sure you select the correct HDMI source by using SOURCE on
this unit’s remote control.
IN
ININ
OUT
set-topbox
HDMIcable
RFcable
Ifyouconnectaset-topboxthroughcomponentvideoinput
If the TV is connected to a cable box or satellite set-top box via
component video input, make sure you select the correct component
video source by using SOURCE on this unit’s remote control.
IN
OUTOUT
OUT
OUT
IN
IN
IN
IN
set-topbox
RFcable
Audio(L/R)cables
Component(Y/Pb/Pr)
videocables
Connectingtheantennaorcable
ININ OUT
antenna
RFcable
cable
Ifyouconnecttoanantenna
Any DTV programs that are broadcast in your area can be received for
free through an antenna connection.
Contact your local content provider or your local electronics retailer if
you are unsure about what HDTV programs are available in your area.
Broadcasters are transitioning from analog to digital TV. This means that
a given broadcaster can have channels available either in analog or in
digital, or both analog and digital at the same time.
The TV produces stereo sound only if a stereo signal is broadcast.
Ifyouconnecttoacable
When your TV is connected to the cable socket, you might receive free
digital and high denition programs (depending on your cable provider).
The channel number for digital and high denition channels includes a
dot “•”. For example, 11.1, 46.30, 108.201. Contact your cable provider
for more information.
IfyouconnecttoaDBS(DirectBroadcastSatellite)
There are two main DBS systems : DirecTV and DishNetwork. These
systems require a separate, proprietary set-top box to decode signals
and send them to the TV. The set-top box contains a digital TV tuner for
receiving off-air digital broadcasts.
Contact your local DBS provider for more information about the
connections and the TV channels.
Ifyouconnecttoaset-topbox
A cable box or satellite set-top box can be connected to the TV
through the following connections :
• ANT
• A/V (Composite Video and Audio)
• YPbPr (Component Video Input)
• HDMI
For information about how to connect a set-top box, see the Quick
Start Guide provided.
English
9

PluggingintheACpowercord
Warning
• Verify that your power voltage corresponds with the voltage printed at the back of the
TV. Do not insert the AC power cord if the voltage is different.
Connect the AC power cord plug to the power outlet. Ensure that the
cord is tightly secured.
English
10

Switchingonandinitialsetup
Before you switch on the TV, check that the AC power cord is properly
connected. Press . (POWER / STANDBY-ON) on the front panel of
the TV, or press . (POWER / STANDBY-ON) on the remote control.
The TV normally takes 25-30 seconds to start up and the following
screen appears the rst time you turn on the TV.
Initial Setup
Initial Setup
Select your menu language.
Seleccione el idioma para el menú.
Sélectionnez la langue du menu. Français
Español
Select Skip
MENU
OK
OK
English
Follow the on-screen instructions to select your language and complete
your TV setup. Installation takes approximately 10 minutes.
Press Í or Æ to select the desired mode for energy saving, then press
OK.
Select “Retail” or “Home” for your location.
Retail
Select OK
Home
Select [Retail] if you want backlight to be brighter.
Select [Home] to reduce power consumption.
You must set [Home]. Otherwise, personalized picture and sound
settings will not be memorized after the unit goes to standby mode.
• Select [Retail], the unit will be set up with predened setting for
retail displays.
• Select [Home], the unit will be set to maximize energy efciency.
Picture and sound settings can be adjusted and saved as per your
personal preferences.
Press OK to begin [Settingsassistant].
BACK
OK
MENU
Settings assistant helps you customize picture settings. You will
see a series of test pictures where the right side and left side
differ. Select the side that is most pleasing to you with the Left/
Right keys.
Next Back Exit
Press Í or Æ 5 times to select the side of the pictures that is the most
pleasing to you. then press OK.
BACK
OK
MENU
Left side Right side
1/5 Select the picture setting that you prefer.
Select Next Back Exit
Press OK to nish [Settingsassistant].
BACK
OK
MENU
You have set up your viewing preferences.
Store Back Exit
Finish the Setup.
Note
• If you are not receiving a signal from your cable service, contact the CATV provider.
• If you press . or MENU during autoprogram, this setting will be canceled.
• The initial autoprogram function can be executed for either [Antenna] or [Cable]
only once. When you change the connection (Antenna / Cable), set autoprogram again.
(Refer to page 24.)
• If there is no signal input from the antenna terminal and no operation for several
seconds after you turn on the TV, [HelpfulHints] appears. Follow the instructions
listed on the TV screen.
English
11

Switchingchannels
Press CH▲/▼ on the front panel. For digital channels, press a number
(1 to 135) followed by a dot “•” and then the corresponding sub
channel number (1 to 135). e.g. 108.30.
• Press CH+/− or enter a number on the remote control.
• Press PREVCH to return to the previously viewed channel.
5 UseyourTV
This section helps you perform basic TV operations.
SwitchingonyourTVandputtingit
instandbymode
Toswitchon
• Press . (POWER/STANDBY-ON) on the front panel or press
. (POWER/STANDBY-ON) on the remote control.
Toswitchtostandby
• Press . (POWER/STANDBY-ON) on the front panel or press
. (POWER/STANDBY-ON) on the remote control again.
Note
• Energy consumption contributes to air and water pollution. When the AC power
cord is plugged in, your TV consumes energy. Your TV has very low standby power
consumption.
English
12

Stillmode
You can pause the image shown on the TV screen.
Press FREEZE to pause the image shown on the TV screen.

Freeze
• The sound output will not be paused.
• If no signal is detected or protected signal is received during still
mode, the image remains paused and the sound output will be
muted.
• The still function will be released after 5 minutes.
To cancel still mode, press any button except . (POWER/STANDBY-ON).
Watchingchannelsfromaset-topbox
Towatchchannelsfromaset-topbox
1 Switch on the set-top box.
»The picture from your set-top box might appear automatically
on the TV screen.
2 Use the remote control of your set-top box to select channels.
Ifthepicturedoesnotappear
1 Press SOURCE repeatedly to select the set-top box and wait a
few seconds for the picture to appear.
2 Use the remote control of your set-top box to select channels.
Watchingconnecteddevices
Towatchconnecteddevices
1 Switch on the connected device.
»The picture from your connected device might appear
automatically on the TV screen.
2 Use the remote control of the device to select channels.
Ifthepicturedoesnotappear
1 Press SOURCE repeatedly to select the connected device and wait
a few seconds for the picture to appear.
2 Use the remote control of the device to select channels.
AutomaticPowerShutOff
If there is no input signal and no operation for 15 minutes, the unit will
turn off automatically.
Adjustingvolume
Toincreaseordecreasevolume
• Press VOL+/− on the remote control or press VOL◄(down) /
►(up) on the front panel.
Tomuteorunmutesound
• Press MUTE on the remote control to mute the sound.
• Press MUTE again or VOL+/− to recover the original sound.
English
13

WatchingaBlu-raydisc
TowatchaBlu-rayDisc
1 Insert a Blu-ray Disc into your player.
2 Press ► (play) on the remote control of the Blu-ray Disc player.
»The Blu-ray Disc might automatically play on the TV.
Ifthepicturedoesnotappear
1 Press SOURCE repeatedly to select the Blu-ray Disc player and
wait a few seconds for the picture to appear.
2 Use the remote control of the Blu-ray Disc player to play the disc.
Switchingaudiomode
This section describes how to switch audio language in digital mode and
how to switch audio in analog mode.
DTV
1 Press SAP to display the currently selected language and the
number of available languages.
11.1
English 1/3
11.1
English 1/3
2 Press SAP repeatedly to cycle through the available audio
languages.
• Available languages differ depending on the broadcast. [Other]
is displayed when the audio language cannot be acquired, or the
acquired languages are other than English, Spanish or French.
Note
• SAP does not control external audio devices.
• The information display will automatically disappear in a few seconds.
TV
Press SAP to display the currently selected audio mode. While
receiving an MTS broadcast, press repeatedly to cycle through the
available audio channel.
11.1
English 1/3
11
SAP / STEREO
When all audio are available
SAP / STEREO SAP / MONO
SAP / STEREO
SAP / STEREO
SAP / STEREO
SAP / MONO
When stereo and monaural audio are available
MONO / STEREO MONO /
STEREO
MONO / STEREO MONO / STEREO
When SAP and monaural audio are available
MONO / STEREO MONO /
STEREO
SAP / MONO SAP / MONO
When only monaural audio is available
MONO
(Cannot be switched)
STEREO : Outputs stereo-audio
SAP : Outputs second audio program
MONO : Outputs mono-audio

English
14

Summaryofpicturesettings
The following picture settings can be congured. Depending on the
format of the picture source, some picture settings are not available.
• [AutoPicture]: Sets all picture settings to the factory default.
• [Brightness]: Adjusts the intensity and details of dark areas.
• [Contrast]: Adjusts the intensity of bright areas, keeping dark areas
unchanged.
• [Color]: Adjusts color saturation.
• [Tint]: Adjusts the color balance in an image.
• [Sharpness]: Adjusts the level of sharpness in image details.
• [ColorTemperature]: To set the color temperature to [Normal],
[Warm] or [Cool].
Changingautopicturemode
1 Press AUTOPIC to set your TV to a predened picture setting.
2 Press Î or ï to select one of the following settings:
• [Personal]: The customized settings you dened by using the
[Picture] menu.
• [Standard]: For normal TV viewing.
• [Sports]: Vivid picture settings for high action.
• [Movie]: Brilliant picture settings for a cinematic experience.
• [Game]: Optimized for PCs, games consoles and playstations.
6 UsemoreofyourTV
Changingpictureandsoundsettings
You must set [Home] in [Location] (refer to page 21).
Otherwise, personalized picture and sound settings will not be
memorized after the unit goes to standby mode.
Changingpicturesettings
1 Press MENU on the remote control.
2 Press OK to enter the [Picture].
Picture
Sound
Setup
Features
Language
USB
Settings assistant
Personal
30
60
36
0
0
Normal
On
Auto Picture
Brightness
Contrast
Color
Tint
Sharpness
Color Temperature
Noise Reduction
3 Press Î or ï to select one of the picture settings, and press OK
to enter the setting.
4 Adjust the picture quality.
[AutoPicture]
Press Î or ï to select the desired setting, then press OK.
([Personal], [Standard], [Sports], [Movie] and [Game])

[Brightness],[Contrast],[Color],[Tint],[Sharpness],
[ColorTemperature]
Press Î or ï to select the desired setting, then Press Í or Æ to
adjust.
[NoiseReduction]
Reduces the noise of the picture.
Press Î or ï to select the desired option, then press OK.
On Reduces noise in an image.
Off Sets noise reduction to off.
Note
• This function is disabled when PC input is selected. (Setting will be in gray.)
5 Press MENU to exit.
Note
• To cancel picture adjustment, press MENU.
English
15

For4:3videosignal
[Normal][16:9]
[Wide]
[MovieExpand]
[Zoom]
Normal
Display a 4:3 picture at its original size. Sidebars appear on both
edges of the screen.
16:9
Display a 4:3 picture at a 16:9 size; the picture is stretched
horizontally to ll the screen.
MovieExpand
Display a 4:3 picture at a 16:9 size; the picture is stretched more
vertically at the top of the screen. This crops out the top of the
picture.
Zoom
Display a 4:3 picture at a 16:9 size; at its maximum size that is more
vertically stretched to ll the screen. This crops out the top and
bottom of the picture.
Wide
Display the picture with its center at the original size and the edges
stretched horizontally to ll the screen.
ForPCinputsignalthrough HDMI1 inputmode
[Normal] [Full]
[Unscaled]
Normal
Display a proportionately stretched picture. Sidebars appear on
both edges of the screen.
Full
Display a picture that is stretched out of proportion to ll the
screen.
Unscaled
Display a picture in its original size.
Changingpictureformat
1 Press FORMAT on the remote control.
2 Press Î or ï to select a picture format and press OK to conrm
your choice.
Summaryofpictureformats
Display modes can be selected when the broadcasting station is sending
16:9 or 4:3 video signal. And 3 types of display modes can be selected
for PC input signal.
For16:9videosignal
[Normal] [4:3]
[Wide]
[MovieExpand]
[Zoom]
Normal
Display a 16:9 picture at its original size.
4:3
Display a 16:9 picture at a 4:3 size; the picture is shortened
horizontally. Sidebars appear on both edges of the screen.
MovieExpand
Display a 16:9 picture that is vertically stretched to ll the screen.
This only crops out the top of the picture.
Zoom
Display a 16:9 picture at its maximum size without changing its
horizontal and vertical ratio.
Wide
Display a horizontally stretched picture. This crops out the left and
right sides of the picture.
English
16

UsingyourTVasaPCmonitor
Use an HDMI-DVI cable or an HDMI-DVI adaptor to connect a PC to
your TV. For sound, add an audio cable with a stereo mini jack.
Caution
• Before you connect your PC, set the PC monitor refresh rate to 60Hz.
Supportedscreenresolutions
The following screen resolutions are supported in PC mode:
Resolution Refresh rate
640 x 480 60Hz
800 x 600 60Hz
1024 x 768 60Hz
1280 x 768 60Hz
1360 x 768 60Hz
1920 x 1080 60Hz
Changingsoundsettings
1 Press MENU on the remote control and select [Sound].
Picture
Sound
Setup
Features
Language
USB
Auto Sound Standard
On
Off
Speakers EasyLink
Stereo
Equalizer
Virtual Surround Sound
Auto Volume Leveling
TV Speakers
Audio Setting
2 Press Î or ï to highlight a sound setting and press OK to select
the setting.
3 Adjust the following items.
[AutoSound]
Press Î or ï to select the desired setting, then press OK.
([Personal], [Standard], [Movie], [Music] and [News])
[Equalizer]
Adjust tone quality for each frequency.
Press Í or Æ to select the specic frequency, then press Î or ï to
adjust the level.
[VirtualSurroundSound]
Sound mode for more spatial or surround sound reproduction.
Press Î or ï to select the desired option, then press OK.
On The Virtual Surround Sound will be effective.
Off The original sound will be output.
[AutoVolumeLeveling]
Reduces sudden changes in volume, for example, during
commercials or when switching channels.
Press Î or ï to select the desired option, then press OK.
On Select if you want to reduce volume differences
between the TV commercials and the programs.
Off Select if you want to turn off the Auto Volume Leveling.
[TVSpeakers]
This option will allow you to select the audio output from the
unit’s speakers. If you connect this TV to an external amplier
which is compatible with HDMI CEC, you can use volume controls
on this TV to control volume on the external amplier.
Press Î or ï to select the desired option, then press OK.
On The sound will be output from the unit’s speakers.
Off The sound will not be output from the unit’s speakers.
Speakers
EasyLink
You can control audio output from your connected
EasyLink Compliant Devices with VOL+/−by using
this unit's remote control.
[AudioSetting]
You can set the output mode as a default for the sound mode
(NTSC only).
This setting is not interlocked when you change the output mode
by pressing SAP. (see ‘Switching audio mode’ on page 14).
Press Î or ï to select the desired option, then press OK.
Stereo Outputs stereo-audio
Mono Outputs mono-audio
SAP Outputs second audio program
4 Press MENU to exit.
Summaryofsoundsettings
The following sound settings can be congured. Depending on the
sound source, some sound settings are not available.
• [AutoSound]: Sets all sound settings to the factory default.
• [Equalizer]: Adjusts individual sound frequencies.
• [VirtualSurroundSound]: Sound mode for more spatial or
surround sound reproduction.
• [AutoVolumeLeveling]: Reduces sudden changes in volume, for
example, during commercials or when switching channels. Select
[On] or [Off].
• [TVSpeakers]: Select [On] or [Off], or output sound to an
EasyLink compliant device. When [SpeakersEasyLink] is selected,
the TV speakers are disabled and TV sound outputs to the speakers
of the compatible EasyLink compliant device. Adjust the volume
using the unit’s remote control.
Note
• If the TV is connected to a non-EasyLink compliant device and [SpeakersEasyLink] is
selected, the TV speakers will not be disabled and continue to output sound.
Changingautosoundmode
1 Press AUTOSOUND to set your TV to a predened sound setting.
2 Press Î or ï to select one of the following settings:
• [Personal]: The customized settings you dened by using the
[Sound] menu.
• [Standard]: For normal TV viewing.
• [Movie]: Realistic sound settings for a cinematic experience.
• [Music]: Emphasize high and low freq. for instrument sound.
• [News]: Clear sound settings for human voice.
English
17

Back
BACK
View/BlockSelect OK
Picture
Sound
Setup
Features
Language
USB
HDMI 1
HDMI 2
Component
PC
40.1 DTV
40.2 DTV
3 Press Î or ï and then press OK repeatedly to switch between
blocked and not blocked.
• A box with indicates that the channel or input source is
blocked.
• An empty box indicates that the channel or input source is
not blocked.
4 Press MENU to exit.
UsingtheTVratingslock
Your TV is equipped with a V-chip that allows you to control access to
individual programs based on their age rating and content rating. The
program content advisory data are sent by the broadcaster or by the
program provider.
If you receive channels through a set-top box or cable box connected
by HDMI, you cannot use the TV ratings lock. Your set-top box or cable
box must be connected through RF or AV connectors.
1 Press MENU on the remote control and select [Features] >
[ChildLock] > [USTVratingslock].
2 Press Î or ï or Í or Æ and then press OK repeatedly to switch
between blocked and not blocked.
Each rating has a box-graphic in front of it to indicate whether
programs carrying that rating are locked:
• A box with indicates that all items in the content ratings list
are blocked.
• An empty box indicates that no items in the content ratings
list are blocked.
• An empty box indicates that some content ratings are
deselected. For example, for rating TV-14, you can deselect
one or more of the following content ratings:[D](Dialog),
[L](Language), [S](Sex), or [V](Violence).
Back
BACK
View/BlockSelect OK
FV V S L D
TV-MA
TV-14
TV-PG
TV-G
TV-Y7
TV-Y
Picture
Sound
Setup
Features
Language
USB
• When you block a rating, all ratings in the younger age
categories are automatically blocked.
3 Press MENU to exit.
Sleeptimer
You can always put your TV in standby mode earlier or reset the
sleeptimer during the countdown.
Press SLEEP to set the sleep timer.
Sleep Off
Sleeptimer display appears on the TV screen.
Press SLEEP repeatedly to change the amount of time (in increments of
30 minutes up to 120 minutes).
Sleep 120min
• Each press of SLEEP will increase the time by 30 minutes.
• After setup, the sleeptimer display can be called up for checking by
pressing SLEEP.
Tip
ToCanceltheSleeptimer
• Press SLEEP repeatedly until “Sleep Off” is displayed on the TV screen.
Childandratinglocks
You can prevent your children from watching certain programs or
certain channels by locking the TV controls and by using ratings.
SettingyourPIN
1 Press MENU on the remote control and select [Features] >
[ChildLock].
2 Enter a 4-digit PIN on theNumberbuttons of the remote control.
• If you have not set up your PIN, enter 0000.
ChangingyourPIN
1 Press MENU on the remote control and select [Features] >
[ChildLock] > [ChangePIN].
2 Enter a 4-digit PIN on theNumberbuttons of the remote control.
• If you have a PIN, enter your current PIN.
• If you do not have a PIN, enter 0000.
• If you have forgotten your PIN, unplug the AC power cord for
10 seconds to restore the PIN to 0000.
3 Enter your PIN again to conrm.
4 Press MENU to exit.
Lockingachannelorinputsource
This section describes how to lock input sources or specied channels.
The channels can be selected but the screen is blanked out and the
audio is muted.
1 Press MENU on the remote control and select [Features] >
[ChildLock] > [ChannelLock].
2 Enter your PIN (see ‘Setting your PIN’ on page 18).
English
18

SummaryofUSmovieratings
Rating Description
NR Not rated.
GMovies with a mild content, suitable for all ages.
PG Movies for which parental guidance is recommended.
They may contain a few racy or violent scenes or
maybe some bad language.
PG-13 Movies for which parental guidance may be
recommended if under age 13.
RRestricted. The movies usually contain offensive sex or
bad language and may be unsuitable for children under
the age of 17. Parental guidance or permission needed.
NC-17 Even with parental permission, forbidden under age 17.
More offensive sex, violence or bad language.
XMovies which generally focus on sex, violence and / or
bad language. Also known as pornography.
SummaryofCanadianEnglishrating
Rating Description
EExempt program.
CProgramming suitable for children under the age of
8 years. No profanity or sexual content of any level
allowed. Minimal comedic violence.
C8+ Suitable for children ages 8 and over. Low intensity
violence and fantasy horror allowed.
GMovies with a mild content, suitable for all ages.
PG Movies for which parental guidance is recommended.
They may contain a few racy or violent scenes or
maybe some bad language.
14+ Programming intended for children ages 14 and over.
May contain intense scenes of violence, strong profanity,
and depictions of sexual activity within the context of
a story.
18+ Programming intended for viewers ages 18 and over.
May contain strong violence, language, and sexual
activity.
SummaryofCanadianFrenchrating
Rating Description
EExempt program.
GAppropriate for all ages with little or no violence and
little to no sexual content.
8ans+ Appropriate for children 8 and up which may contain
little violence, some foul language and / or little to no
sexual content.
13ans+ Appropriate for children 13 and up, with moderate
violence, language, and some sexual situations. Persons
under 13 should be accompanied by an adult.
16ans+ Appropriate for children 16 and up, with strong
violence, strong language, and strong sexual content.
18ans+ Only to be viewed by adults and contains extreme
violence and graphic sexual content / pornography.
SummaryofTVratings
Agerating Contentrating
TV-Y : Appropriate for children of all ages with
themes and elements suitable for children
aged 2-6.
None
TV-Y7 : Programs designed for children age 7 and
older. [FV]
(FantasyViolence)
TV-G : Programs suitable for all ages. These programs
contain little or no violence, no strong
language and little or no sexual dialog or
situations.
None
TV-PG: Programs contain elements that some parents
may nd unsuitable for younger children
and which may need parental guidance. The
program may contain moderate violence,
sexual dialog and / or situations and some
strong language.
[D](Dialog)
[L](Language)
[S](Sex)
[V](Violence)
TV-14 : Programs contain elements that may not
be suitable for children under 14 years of
age. These programs include one or more
of the following: intense violence, intense
sexual situations, suggestive dialog and strong
language.
[D](Dialog)
[L](Language)
[S](Sex)
[V](Violence)
TV-MA: Programs are designed to be viewed by adults
and may be unsuitable for children under
the age of 17. These programs may contain
graphical violence, explicit sexual activity
and / or crude or indecent language.
[L](Language)
[S](Sex)
[V](Violence)
Usingthemovieratingslock
You can control viewing of movies based on their MPAA (Motion
Picture Association of America) rating.
1 Press MENU on the remote control and select [Features] >
[ChildLock].
2 Select one of the menus for movie ratings lock.
• In the USA, select [USMovieratingslock].
• In Canada, select [CanadianEnglishRating] or
[CanadianFrenchRating].
3 Enter your PIN (see ‘Setting your PIN’ on page 18).
»The following screen shows the ratings in
[USMovieratingslock].
Back
BACK
View / BlockSelect OK
X
NC-17
R
PG-13
PG
G
NR
Picture
Sound
Setup
Features
Language
USB
4 Press Î or ï and then press OK repeatedly to switch between
blocked and not blocked.
• A box with indicates that all items in the rating are blocked.
• An empty box indicates that no items in the rating are not
blocked.
5 Press MENU to exit.
English
19