Philips BTD2180 User manual

www.philips.com/welcome
User manual
Always there to help you
Register your product and get support at
BTD2180
Question?
Contact
Philips

1
English
EN
Contents
Contents
1 Important 2
Safety 2
2 Your micro system 4
Introduction 4
What's in the box 4
Overview of the main unit 5
Overview of the remote control 6
3 Connect 8
Place the unit 8
Connect speakers 8
Connect video cables 8
Connect an external audio device 9
Connect power 10
4 Get started 11
Prepare the remote control 11
Set clock 11
Turn on 12
Find the correct viewing channel 12
Select the correct TV system 12
Change system menu language 12
Turn on Progressive Scan 13
5 Play 14
Play from disc 14
Play from USB or recored discs 15
Play a slideshow with background music 15
Resume video play from last stopped
point 15
Control play 16
Play options 16
Change the audio channel 16
Enjoy karaoke 16
Adjust Karaoke settings 17
Play from Bluetooth-enabled devices 17
6 Listen to the radio 19
Tune to a radio station 19
Program radio stations automatically 19
Program radio stations manually 19
Select a preset radio station 19
7 Other features 20
Set the alarm timer 20
Set the sleep timer 20
Listen to an external device 20
8 Adjust settings 21
General setup 21
Video setup 21
Audio setup 22
Preferences 22
9 Product information 24
Specications 24
Supported disc formats 25
USB playability information 25
10 Troubleshooting 26
11 Notice 28

2EN
1 Important
Safety
Important Safety Instructions
• Follow all instructions.
• Heed all warnings.
• Do not use this device near water.
• Clean only with dry cloth.
• Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
• Do not install near any heat sources such
as radiators, heat registers, stoves, or other
devices(includingampliers)thatproduce
heat.
• Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the device.
• Onlyuseattachments/accessoriesspecied
by the manufacturer.
• Use only with the cart, stand, tripod,
bracket,ortablespeciedbythe
manufacturer or sold with the device.
When a cart is used, use caution when
moving the cart/device combination to
avoid injury from tip-over.
• Unplug this device during lightning storms
or when unused for long periods of time.
• Referallservicingtoqualiedservice
personnel. Servicing is required when the
device has been damaged in any way, such
as power-supply cord or plug is damaged,
liquid has been spilled or objects have
fallen into the device, the device has been
exposed to rain or moisture, does not
operate normally, or has been dropped.
• Battery usage CAUTION –To prevent
battery leakage which may result in bodily
injury, property damage, or damage to the
unit:
• Install all batteries correctly, + and - as
marked on the unit.
• Do not mix batteries (old and new or
carbonandalkaline,etc.).
• Batteries(packedorinstalled)shallnot
be exposed to excessive heat such as
sunshine,reorthelike.
• Remove batteries when the unit is not
used for a long time.
• The device shall not be exposed to
dripping or splashing.
• Do not place any sources of danger on
thedevice(e.g.liquidlledobjects,lighted
candles).
• Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Risk of overheating! Never install this apparatus
inaconnedspace.Alwaysleaveaspaceof
at least four inches around this apparatus for
ventilation. Ensure curtains or other objects
never cover the ventilation slots on this
apparatus.
Caution
•Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.

3
English
EN
Warning
•Never remove the casing of this device.
•Never lubricate any part of this device.
•Never place this device on other electrical equipment.
•Keep this device away from direct sunlight, naked
amesorheat.
•Never look into the laser beam inside this device.
•Ensure that you always have easy access to the power
cord, plug, or adaptor to disconnect this device from
the power.

4EN
2 Your micro
system
Congratulations on your purchase, and
welcometoPhilips!Tofullybenetfromthe
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this unit, you can:
• watch video from DVD/VCD/SVCD, or
USB storage devices.
• enjoy audio from discs, Bluetooth-enabled
devices, USB storage devices, or other
external devices.
• enjoy Karaoke by connecting a
microphone.
• view pictures from discs or USB storage
devices.
• listen to FM radio stations.
You can enrich sound output with below
sound effect:
• DigitalSoundControl(DSC)
• DSC 1: Balanced
• DSC 2: Clear
• DSC 3: Powerful
• DSC 4:Warm
• DSC 5: Bright
The unit supports these media formats:
DVD region code Countries
Europe
What's in the box
Check and identify the contents of your
package:
• Main unit
• 2 x speakers
• 1xcompositevideocable(yellow)
• Remotecontrol(withtwoAAAbatteries)
• User manual

5
English
EN
Overview of the main unit
a (power button/indicator and Bluetooth
indicator)
• Turn the unit on or off.
• Switch to standby mode or Eco
standby mode.
• Indicate the power/Bluetooth
connection status.
b SOURCE
• Selectasource:BT(Bluetooth),DISC,
USB, FM, AUX.
c Display panel
• Show current status.
d
• Socket for a USB mass storage device.
e MIC IN
• Connect a microphone.
f Disc compartment
g
• Open/close the disc compartment.
h
• Stop play.
a
b
c
f
d
eg
k
j
i
h
i /
• Skip to the previous/next track.
• Press to tune to a radio station.
• Press and hold to search for radio
stations automatically.
j VOLUME+/-
• Adjust volume.
k
• Start, pause, or resume play.

6EN
Overview of the remote
control
a /STANDBY
• Turn the unit on or off.
• Switch to standby mode or Eco
standby mode.
b
• Access the system menu.
c DISPLAY
• View playback information.
d / ( / )
• Navigate through the menu.
• Search within a track/disc/USB.
• Tune to a radio station.
a
b
c
d
e
f
h
gp
o
q
lm
n
i
k
r
s
t
j
u
e SUBTITLE/PRESET + ( ) /
AUDIO/PRESET -( )
• Navigate through the menu.
• Skip to the previous/next album.
• SUBTITLE ( ):Selectapresetradio
station.
• AUDIO ( ):Setthesubtitlelanguage.
• Set time.
f
• Return to the previous display menu.
g +/-
• Adjust volume.
h /
• Skip to the previous or next title,
chapter,track,orle.
i Numeric buttons
• Select a title/chapter/track to play.
• Select a preset number.
j MENU
• Access the DISC/USB menu.
k OPTION
• In DISC/USB play mode, press to
select preferred play options.
l PROG/CLOCK SET
• Program radio stations.
• Set the clock.
• View clock information.
m TIME
• Set the alarm timer.
n SLEEP
• Set the sleep timer.
o
• Start, pause, or resume play.

7
English
EN
p
• Stop play.
q
• Mute or restore volume.
r SOUND
• Enrich sound effect with Digital Sound
Control(DSC).
s OK
• Conrmaselection.
t SOURCE
• Selectasource:BT(Bluetooth),DISC,
USB, FM, AUX.
u EJECT
• Press to open or close the disc
compartment.

8EN
3 Connect
Place the unit
1 Place the unit near the TV.
2 Place the left and right speakers at equal
distance from the TV and at an angle
of approximately 45 degrees from the
listening position.
Note
•To avoid magnetic interference or unwanted noise,
never place this apparatus and speakers too close to
any radiation devices.
•Place this unit on top of a table.
•Never place this unit in an enclosed cabinet.
•Install this unit near the AC outlet where the AC power
plug can be easily reached.
Connect speakers
Note
•For optimal sound, use the supplied speakers only.
•Connect only speakers with impedance that is the
same or higher than the supplied speakers. Refer to the
Specicationssectionofthismanual.
1 Holddownthesocketap.
2 Insert the stripped part of the wire
completely.
• Insert the right speaker wires to "R",
left speaker wires to "L".
• Insert the red wires to "+", black wires
to "-".
3 Releasethesocketap.
Connect video cables
You can select the best video connection that
your TV supports.
• Option 1: Connect through a composite
video(CVBS)cable(forastandardTV).
• Option 2: Connect through component
video cables (for a standard TV or
ProgressiveScanTV).
Option 1: Connect through a
composite video cable
• Connect the composite video cable
(supplied)to:
• the VIDEO socket on the back of the
unit.
• the video input socket on the TV.

9
English
EN
Option 2: Connect through
component video cables
Note
•The progressive scan video quality is only available
when a progressive scanTV is connected.
•If yourTV does not support progressive scan, you
cannot view the picture.
•For how to activate progressive scan on yourTV, refer
to the TV user manual.
you can connect a progressive scan TV through
component video for higher quality video.
• Connect component video cables (green/
red/blue-notsupplied)to:
• the component (Y,Pr, and Pb)sockets
on the back of the unit.
• the component input sockets on the
TV.
TV
COMPONENT VIDEO INPUT
YPr Pb
TV
Connect an external audio
device
You can route audio from an external audio
device to this unit.
If the external audio device has analog audio
output sockets (such as your TV):
• Connect audio cables (red/white - not
supplied)to:
• the AUDIO-IN(Land R)socketson
the back of the unit.
• the audio output sockets on the
external audio device.
If the external audio device has a 3.5mm audio
output socket:
AUX IN
R
L
LINE OUT
R
L

10 EN
• Connect a red/white-to-3.5mm audio
cable(notsupplied)to:
• the AUDIO-IN (Land R)socketson
the back of the unit.
• the headphone socket on the external
audio player.
Connect power
Caution
•Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the unit.
•Risk of electric shock! When you unplug the AC power
cord, always pull the plug from the socket. Never pull
the cord.
•Before you connect the AC power cord, make sure that
you have completed all other connections.
• Connect the AC power cord to the
wall power socket.

11
English
EN
4 Get started
Caution
•Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus.The
model number and serial number are on the
back of the apparatus.Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Prepare the remote control
Caution
•Risk of explosion! Keep batteries away from heat,
sunshineorre.Neverdiscardbatteriesinre.
•Risk of decreased battery life! Never mix different
brands or types of batteries.
•Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
To insert the remote control battery:
1 Open the battery compartment.
2 Insert the supplied AAA batteries with
correctpolarity(+/-)asindicated.
3 Close the battery compartment.
a
b
c
Set clock
1 In standby mode, press and hold CLOCK
SET on the remote control for more than
two seconds.
» [24H] or [12H] hour format is
displayed.
2 Press / (or +/-)toselect[24H]
or [12H] hour format, and then press
CLOCK SET.
» The hour digits are displayed and begin
to blink.
3 Press / (or +/-)tosethour,andthen
press CLOCK SET.
» The minute digits are displayed and
begin to blink.
4 Repeat step 3 to set minute.
Note
•If no button is pressed in 90 seconds, the system exits
clock setting mode automatically.
Tip
•You can view clock information in Eco power mode by
pressing CLOCK SET.

12 EN
Turn on
• Press .
» The unit switches to the last selected
source.
Switch to standby mode
• Press again to switch the unit to standby
mode.
» Theclock(ifset)isdisplayedonthe
panel.
To switch to ECO standby mode:
• Press and hold for more than two
seconds.
» The display panel is dimmed.
Note
•The unit switches to Eco Power Standby mode after 15
minutes in standby mode.
To switch between standby mode and ECO
standby mode:
• Press and hold for more than two
seconds.
Find the correct viewing
channel
1 Press SOURCE repeatedly to switch to
the disc source.
2 Turn on the TV and switch to the correct
video-in channel in one of the following
ways:
• Go to the lowest channel on your TV,
and then press the Channel Down
button until you see the blue screen.
• Press the source button repeatedly on
the remote control of your TV.
Tip
•The video-in channel is between the lowest and highest
channels and may be called FRONT, A/V IN,VIDEO etc.
See the TV user manual on how to select the correct
input on the TV.
Select the correct TV system
Change this setting if the video is not displayed
correctly. By default, this setting matches the
most common setting for TVs in your country.
1 Press .
2 Select [Setup] -> [Video] -> [TV System].
3 Select a setting and press OK.
• [PAL] - For TV with PAL color system.
• [Multi] - For TV that is compatible with
both PAL and NTSC.
• [NTSC] - For TV with NTSC color
system.
4 To return to the previous menu, press .
5 To exit the menu, press .
Change system menu
language
1 Press .
2 Select [Setup] -> [General] -> [OSD
Language], and press OK.
3 Select a setting and then press OK.
4 To exit the menu, press .

13
English
EN
Turn on Progressive Scan
Progressive scan displays twice the number of
frames per seconds than interlaced scanning
(ordinaryTVsystem).Withnearlydoublethe
number of lines, progressive scan offers higher
picture resolution and quality.
Before you turn on this feature, make sure that:
• the TV supports progressive scan signals.
• you have connected the unit with the TV
through component video.
1 Turn on the TV.
2 Make sure that the TV progressive scan
mode is deactivated (see the TV user
manual).
3 Switch the TV to the correct viewing
channel for this unit.
4 Press SOURCE repeatedly to switch to
the disc source, and then press .
5 Select [Setup] -> [Video] -> [Progressive]
-> [On], and then press OK.
» The progressive setup is complete.

14 EN
5 Play
Play from disc
Caution
•Risk of product damage! Never play discs with
accessories such as disc stabilizer rings or disc
treatment sheets.
•Never put any objects other than discs into the disc
compartment.
1 Press SOURCE repeatedly to select the
disc source.
2 Press to open the disc compartment.
3 Insert a disc with the printed side facing
upward.
4 Press to close the disc compartment.
» Play starts automatically.
If play does not start automatically:
• Select a title/chapter/track and then press
.
Tip
•To play a locked DVD, enter the 6-digit parental control
password.
CD
Use the disc menu
WhenyouloadaDVD/(S)VCDdisc,amenu
may be displayed on the TV screen.
• Press MENU to access or exit disc menu
manually.
ForVCD with PlayBack Control (PBC) feature
(version 2.0 only):
With the PBC feature, you can play VCD
interactively according to the menu screen.
• During play, press MENU to enable/disable
PBC.
» When PBC is enabled, the menu
screen is displayed.
» When PBC is disabled, normal play is
resumed.
Select an audio language
• During disc play, press AUDIO ( )to
select an audio language for a DVD or
DivX(HomeTheater3.1)video.
» The language options are displayed.
If the selected audio channel is
unavailable, the default disc audio
channel is used.
Note
•For some DVDs, the language can only be changed
from the disc menu. Press MENU to access the menu.
Select a subtitle language
• During play, press SUBTITLE ( )
repeatedly to select a subtitle language for
aDVDorDivX(HomeTheater3.1)video.
Note
•For some DVDs, the language can only be changed
from the disc menu. Press MENU to access the disc
menu.

15
English
EN
Play from USB or recored
discs
YoucanplayDivX(HomeTheater3.1)/MP3/
JPEGpicturelescopiedontoaCD-R/RW,
recordable DVD, or USB storage device.
1 Select a source.
• Press SOURCE repeatedly to select
the disc or USB source.
2 Insert the USB storage device or disc.
» Play starts automatically.
To play a specied le:
1 Press to stop play.
2 Press / to select a folder, and then
press OKtoconrm.
• To return to the previous menu, press
.
3 Press / toselectalefromthefolder.
4 Press to start play.
Note
•YoucanonlyplayDivX(HomeTheater3.1)videos
rented or purchased through the DivX registration
code of this unit.
•Subtitleleswiththefollowinglenameextensions(.srt,
.smi,.sub,.ssa,.ass)aresupportedbutdonotappearon
thelenavigationmenu.
•Thesubtitlelenamehastobethesameasthele
name of the video.
USB
Play a slideshow with
background music
ThisdevicecanplayMP3lesandJPEGphotos
simultaneously.
Note
•TheMP3andJPEGlesmustbestoredonthesame
disc or USB storage device.
1 PlayanMP3le.
2 Navigate to the photo folder/album and
press to start the slideshow.
» Slideshow begins and continues till the
end of the photo folder or album.
» Audio continues till the end of the last
le.
• To return to the previous menu, press .
• To stop the slideshow, press .
Resume video play from last
stopped point
Note
•This feature is only available for CD/DVD/VCD/DivX
play.
• In stop mode and when the disc has not
been removed, press .
To stop play completely:
• In stop mode, press .

16 EN
Control play
/ Select a folder.
/ ( / ) Fast backward/forward.
/ Skip to the previous or
next title/chapter/track/
le.
Pause or resume play.
Stop play.
+/- Increase or decrease
volume.
(mute) Mute or restore sound.
SOUND Enrich sound effect with
DSC: balanced, clear,
powerful, warm, and
bright.
DISPLAY View playback
information.
Play options
In DISC/USB play mode, press OPTION to
select different play options.
• [PBC]: turn PlayBack Control on/off.
• [Aspect Ratio]: select a picture display
formattottheTVscreen.
• [Angle]: switch between camera angles.
Note
•Some DVDs contain alternate scenes, such as scenes
recorded from different camera angles. For such DVDs,
you can select from the available alternate scenes.
• [Microphone]: turn on or off the
microphone sound output.
• [Karaoke Setup]: increase or decrease the
volume level and echo level of microphone
input, and the key level of music.
• [Vocal]: select various Karaoke audio
modes, or turn off the original vocal.
• [Zoom]: during video play, zoom in/out to
pan through the image.
• [Repeat]: choose a repeat play option or
turn off the repeat function.
• [GOTO]: during video play, specify a
position to start play by entering the
desired time or number.
• [Slow Backward] & [Slow Forward]:
during video play, select a slow backward/
forward speed.
Change the audio channel
Note
•This feature is only available for VCDs and DivX (Home
Theater3.1)videos.
During play, press AUDIO repeatedly to select
an audio channel available on the disc:
• [Mono Left]
• [Mono Right]
• [Mix-Mono]
• [Stereo]
Enjoy karaoke
Youcanconnectamicrophone(notsupplied)
to sing along with a music source.
Note
•Before you connect a microphone, set the microphone
volume to the minimum level to prevent howling.
1 Insert a Karaoke disc.
2 Connect a microphone to the MIC IN
socket on the front panel.
3 Press , and then select [Karaoke].
4 Turn on the microphone sound output
(see “Adjust karaoke settings“).

17
English
EN
5 Play a Karaoke disc and sing along through
the microphone.
Adjust Karaoke settings
• [Microphone]: turn on or off the
microphone sound output.
• [Mic Volume]: adjust the microphone
volume.
• [Echo Level]: adjust echo level.
• [Karaoke Scoring]: turn off the function of
Karaoke scoring or select a scoring level
(basic/intermediate/advance).Ifalevelis
selected, the score is displayed after each
song ends.
• [Karaoke Idol]: compete for singing up to
4 songs among different signers, and the
contest result is displayed.
1)Inthe[Karaoke Scoring] option, select a
level(basic/intermediate/advance).
2)Inthe[Karaoke Idol] option, turn on the
contest.
» The song selection menu is displayed.
3)Inputatrack(VCD/SVCD)oratitle/
chapter(DVD)astherstsong.Upto4songs
can be selected.
4)Thenselect[Start], and press OK to start
play selected songs.
» After all the selected songs end, a con-
test result is displayed.
• [Key Shift]: adjust the pitch level that
matches your voice.
• [Vocal]: select various Karaoke audio
modes, or turn off the original vocal.
Play from Bluetooth-enabled
devices
Note
•The effective operation range between the unit and
your Bluetooth enabled device is approximately 10
meters(30feet).
•Any obstacle between the system and the device can
reduce the operational range.
•Compatibility with all Bluetooth devices is not
guaranteed.
1 Press SOURCE repeatedly to select the
Bluetooth source.
» [BT] (Bluetooth)isdisplayed.
» Thepower/Bluetoothindicatorashes
blue.
2 On your device that supports A2DP
(AdvancedAudioDistributionProle),
enable Bluetooth and search for Bluetooth
devices that can be paired (refer to the
usermanualofthedevice).


0000
PIN
BTD2180

18 EN
3 Select 'PHILIPS_BTD2180' on your
Bluetooth enabled device and if necessary
input '0000' as the paring password.
» After successful pairing and connection,
the power/Bluetooth indicator turns
solid blue, and the unit beeps twice.
4 Play audio on the connected device.
» Audio streams from your Bluetooth
enabled device to this unit.
Tip
•The unit can memorize up to 8 previously connected
Bluetooth devices.
To disconnect the Bluetooth-enabled device:
• Deactivate Bluetooth on your device; or
• Move the device beyond the
communication range.
To clear Bluetooth pairing history:
• Pressand hold on the main set for 3
seconds.
» The current Bluetooth connection is
disconnected.
» After successful clearing, [CLEAR] is
displayed for 3 seconds.