Philips BTM1560/12 User manual

Register your product and get support at
www.philips.com/support
User manual
BTM1560
Micro Music
System

1EN
Contents
1 Important 2
Safety 2
Notice 3
2 Your Micro Music System 4
Introduction 4
What's in the box 4
Overview of the main unit 5
Overview of the remote control 6
3 Get started 8
Connect speakers 8
Connect power 8
Prepare the remote control 9
Power on 9
Set the clock 9
4 Play 10
Play from disc 10
Play from USB 10
Control play 10
Skip tracks 10
Program tracks 11
Play from Bluetooth-enabled
devices 11
5 Listen to FM radio 12
Tune to a radio station 12
Store radio stations automatically 12
Store radio stations manually 13
Select a preset radio station 13
6 Adjust sound 13
Select a preset sound eect 13
Adjust volume level 13
Mute sound 13
7 Other features 14
Set the alarm timer 14
Set the sleep timer 14
Listen to an external device 14
Charge your devices 15
8 Product information 16
Specications 16
USB playability information 16
Supported MP3 disc formats 17
9 Troubleshooting 17

2EN
1 Important
Safety
Read and understand all instructions
before you use this micro music system.
If damage is caused by failure to follow
the instructions, the warranty does not
apply.
This 'bolt of lightning' indicates
uninsulated material within the device
may cause an electrical shock. For the
safety of everyone in your household,
please do not remove the covering.
The 'exclamation mark' calls attention to
features for which you should read the
enclosed literature closely to prevent
operating and maintenance problems.
WARNING: To reduce the risk of re or
electric shock, the device should not be
exposed to rain or moisture and objects
lled with liquids, such as vases, should
not be placed on the device.
CAUTION: To prevent electric shock,
fully insert the plug. (For regions with
polarized plugs: To prevent electric
shock, match wide blade to wide slot.)
Warning
•Never remove the casing of this apparatus.
•Never lubricate any part of this apparatus.
•Never look into the laser beam inside this
apparatus.
•Never place this apparatus on other
electrical equipment.
•Keep this apparatus away from direct
sunlight, naked ames or heat.
•Ensure that you always have easy access
to the power cord, plug or adaptor to
disconnect the apparatus from the power.
• Make sure that there is enough
free space around the product for
ventilation.
• Only use attachments/accessories
specied by the manufacturer.
• Battery usage CAUTION – To
prevent battery leakage which may
result in bodily injury, property
damage, or damage to the product:
• Install the battery correctly, +
and - as marked on the product.
• The battery (packed or installed)
shall not be exposed to
excessive heat such as sunshine,
re or the like.
• Remove the battery when the
product is not used for a long
time.
• The product shall not exposed to
dripping or splashing.
• Do no place any source of danger
on the product (e.g. liquid lled
objects. lit candles).
• Where the MAINS plug or an
appliance coupler is used as the
disconnect device, the disconnect
device shall remain readily
operable.

3EN
Notice
Any changes or modications made
to this device that are not expressly
approved by Gibson Innovations may
void the user’s authority to operate the
equipment.
Compliance
Hereby, Gibson Innovations declares
that this product is in compliance
with the essential requirements
and other relevant provisions of
Directive 2014/53/EU. You can nd the
Declaration of Conformity on www.
philips.com/support.
Care of the environment
Disposal of your old product and
battery
Your product is designed and
manufactured with high quality
materials and components, which can
be recycled and reused.
This symbol on a product means that
the product is covered by European
Directive 2012/19/EU.
This symbol means that the product
contains batteries covered by European
Directive 2013/56/EU which cannot be
disposed of with normal household
waste.
Inform yourself about the local separate
collection system for electrical and
electronic products and batteries.
Follow local rules and never dispose of
the product and batteries with normal
household waste. Correct disposal
of old products and batteries helps
prevent negative consequences for the
environment and human health.
Removing the disposable batteries
To remove the disposable batteries, see
battery installation section.
Environmental information
All unnecessary packaging has been
omitted. We have tried to make the
packaging easy to separate into three
materials: cardboard (box), polystyrene
foam (buer) and polyethylene (bags,
protective foam sheet.)
Your system consists of materials
which can be recycled and reused
if disassembled by a specialized
company. Please observe the local
regulations regarding the disposal
of packaging materials, exhausted
batteries and old equipment.
The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such
marks by Gibson Innovations is under
license.
The making of unauthorized copies
of copy-protected material, including
computer programs, les, broadcasts
and sound recordings, may be an
infringement of copyrights and
constitute a criminal oence. This
equipment should not be used for such
purposes.

4EN
Care for your product
• Do not insert any objects other than
discs into the disc compartment.
• Do not insert warped or cracked
discs into the disc compartment.
• Remove the discs from the disc
compartment if you are not using
the product for an extended period
of time.
• Only use microber cloth to clean
the product.
This apparatus includes this label:
Note
•The type plate is located on the back of the
product.
2 Your Micro
Music System
Congratulations on your purchase, and
welcome to Philips! To fully benet from
the support that Philips oers, register
your product at www.philips.com/
support.
Introduction
With this unit, you can:
• enjoy audio from discs, USB
devices, Bluetooth devices, and
other external devices;
• listen to FM radio stations.
The unit supports these media formats:
What's in the box
Check and identify the contents of your
package:
• Main unit
• Remote control (with one AAA
battery)
• Speaker boxes (×2)
• Printed materials

5EN
a IR sensor
b LED indicator
• Standby indicator: turns red
when this product is switched to
standby.
• Bluetooth indicator: turns
blue to indicate the Bluetooth
connection status.
c
• Switch this product on or to
standby.
d
• Connect USB storage devices.
e
• Open or close the disc
compartment.
f Disc compartment
g Volume knob
• Adjust volume.
h Display panel
• Show current status.
Overview of the main unit
AUDIO IN
5
4
3
2
1
6
12
11
9
8
7
10
13

6EN
i
• Press to select a source: DISC,
USB, TUNER, AUDIO IN, BT.
• In Bluetooth mode, press and
hold for more than 2 seconds
to disconnect the currently
connected device and enter
pairing mode.
• Start or pause play.
• Stop play.
• Erase a program.
/
• Skip to previous/next track.
• Search within a track/disc.
• Tune to a radio station.
• Adjust time.
j
k antenna
• Improve FM radio reception.
l
• Connect external audio devices.
m socket
• Connect with the speakers.
Overview of the remote
control
18
17
14
13
15
16
12
11
10
9
2
1
3
4
5
7
8
6
a
• Switch this product on or to
standby.
b
• Select CD source.
c
• Select FM source.
d /
• Skip to the previous/next track.
• Search within a track/disc/USB.

7EN
• Tune to a FM station.
• Adjust time.
e
• Select shue mode to play
tracks randomly.
• Select repeat mode to play a
track or all tracks repeatedly.
f /
• Select a preset radio station.
• Skip to previous/next album.
g
• Display playback information.
h
• Set sleep timer.
• Set alarm timer.
i
• Set the clock.
• View clock information.
• In standby, press and hold to
toggle clock display on or o.
j
• Program tracks.
• Program radio stations.
• Auto store radio stations.
k
• Mute or restore volume.
l
• Select a preset sound eect.
m +/- (volume)
• Adjust volume.
n
• Adjust display brightness.
o
• Stop play or erase a program.
p
• Press to start, pause, or resume
play.
q
• Select USB source.
• Select AUDIO IN source.
r
• Select Bluetooth source
• In Bluetooth mode, press and
hold for more than 2 seconds
to disconnect the currently
connected device and enter
pairing mode.

8EN
3 Get started
Caution
•Use of controls or adjustments or
performance of procedures other than
herein may result in hazardous radiation
exposure or other unsafe operation.
Always follow the instructions in this
chapter in sequence.
Connect speakers
Note
•Insert the stripped portion of each speaker
wire into the socket completely.
•For better sound quality, use the supplied
speakers only.
1 For the right speaker, nd the
sockets on the back of the main unit
marked "R".
2 Insert the red wire into the red (+)
socket, and the black wire into the
black (-) socket.
3 For the left speaker, nd the sockets
on the main unit marked "L".
4 Repeat step 2 to insert the left
speaker wire.
To insert each speaker wire:
1 Hold down the socket ap.
2 Insert the speaker wire fully.
3 Release the socket ap.
AUDIOIN
FMANT
Connect power
Caution
•Risk of product damage! Ensure that the
power supply voltage corresponds to
the voltage printed on the back or the
underside of the unit.
•Risk of electric shock! Before you plug the
AC power cord, make sure that the plug is
xed securely. When you unplug the AC
power cord, always pull the plug, never pull
the cord.
•Before you connect the AC power cord,
make sure that you have completed all the
other connections.
AUDIO IN
FMANT
Connect the power cable to the wall
socket.

9EN
Prepare the remote
control
Caution
•Risk of product damage! When the remote
control is not used for long periods, remove
the batteries.
•Batteries contain chemical substances, so
they should be disposed of properly.
To insert the remote control battery:
1 Open the battery compartment.
2 Insert the supplied AAA battery with
correct polarity (+/-) as indicated.
3 Close the battery compartment.
Power on
Press .
» The product switches to the last
selected source.
Switch to standby mode
Press again to switch the product to
standby with no clock display, or to
standby with clock display.
» The red standby indicator lights up.
• In standby, you may press and hold
to toggle clock display on
or o.
Note
•The product switches to standby mode
after 15 minutes inactive.
•To achieve the ecient energy saving
performance, unplug any external
electronic device from the USB port when
the device is not in use.
Set the clock
1 In power on mode, press and hold
CLOCK for more than 2 seconds to
enter the clock setting mode.
» or is displayed.
2 Press / to select 24H or 12H
hour format, and then press .
» The hour digits begin to blink.
3 Press / to set the hour, and
then press .
» The minute digits begin to blink.
4 Press / to set the minute, and
then press .
» The clock is set.
Note
•To view clock in power on mode, press
briey .
•In standby, you may press and hold
to toggle clock display on or o.
•If clock display is turned on in standby,
power consumption increases.