Philips MCDB710/05 User manual

MCDB710
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
1
Quick Start Guide
Quick start guide
2
User Manual
Remote control with two
AAA batteries
User manual
Composite Video Cable
FM/DAB antenna
MCDB710 QUG_05_Eng 2008.5.8, 15:391

Tips
–See the User Manual for other TV
connection options.
–For connecting to a Progressive Scan
TV, refer to the user manual for proper
connections and detailed setup.
1
2
4
3
Setting up the TV
1
2
Press SOURCE (DISC on the remote control) to select disc source.
Turn on theTV and set it to the correct Video In channel.
AC power
Speaker
(right) Speaker
(left)
3
1
1
4
4
4
FM/DAB antenna
Connect the speaker cables.
Connect the FM/DAB antenna.
Connect the composite video to a TV.
Connect the power cords of the system and TV.
2
MCDB710 QUG_05_Eng 2008.5.8, 15:392

Setting the clock
1
2
3
4
In standby mode, press and hold CLOCK on the remote.
When the hour digits flash, turn VOLUME-/+ on the system or press VOL +/- on the
remote to set the hours.
Press CLOCK again and the minute digits flash.Then turn VOLUME-/+ on the system or
press VOL +/- on the remote to set the minutes.
Press CLOCK again to confirm the time setting.
Setting DVD menu options
IMPORTANT!
If the progressive scan feature is activated but the connected TV does
not support progressive signals or the cables are not connected
accordingly, see the user manual for proper progressive scan setup or
deactivate the progressive scan feature as below:
1) Turn off your TV progressive scan mode or turn on to interlaced mode.
2) Press SYSTEM MENU on the remote to exit the system menu and
then DISC and “1” to exit progressive scan.
Tip
See chapters "Getting Started" and "System Menu Options" in the User Manual for detailed descriptions.
Playing a disc
1
2
Press çto open the disc tray and load in a disc, then press the same button again to close the disc tray.
➜Make sure the label side of the disc is facing up.
Playback will start automatically. If not pressÉÅ.
To stop playback, press 9.
3
DIVX[R] VOD
MCDB710 QUG_05_Eng 2008.5.8, 15:393

Programming and tuning to radio stations
1
2
3
Press SOURCE (FM/DAB on the remote) to select tuner source.
Press SCAN on the system (or MODE/SCAN on the remote control) for more than
two seconds to program all available stations in order of waveband.
Press PRESET+/- (¡/ ™on the remote) until the desired preset station is displayed.
PDCC-JS-WP-0818
Tip
Detailed playback features and
additional functions are described in the
accompany owner's manual.
Notes for remote control:
– First, select the source you wish to control
by pressing one of the source select keys on
the remote control (DISC or FM/DAB, for
example).
–Then select the desired function (
2; , í ,
ë for example).
1
2
3
Insert the USB device’s USB plug into the socket on the set.
Press SOURCE once or more (or USB on the remote control) to select USB.
Play the USB’s audio files as you do with the albums/tracks on a CD,
Playing a USB mass storage device
With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1),
USB flash players (USB 2.0 or USB1.1), memory cards (requires an additional card reader to
work with this Hi-Fi system).
Tuning to DAB stations
1
2
3
Press SOURCE on the front panel of the system or press FM/DAB on the remote
control repeatedly to select the DAB source and start a quick scan.
Press ¡1 / 2™ on the front panel of the system (or 1 /2 on the remote control) to
select the desired station from the list.
Press ÉÅ on the front panel of the system (or OK/ENTER on the remote control) to
confirm and tune to your desired station.
MCDB710 QUG_05_Eng 2008.5.8, 15:394