Philips DCB146/12 User manual

DCB146
Register your product and get support at
www.philips.com/welcome
Quick Start Guide
User Manual
Remote Control
Main unit
User Manual Quick Start Guide
2 x Loudspeaker boxes
4 x iPod adaptors
Quick Start Guide
DCB146_12_QSG_EN_V1.1.indd 1 2010-6-10 16:16:43

PULL TO OPEN
AConnect
a
b
BPlay a disc
1Press DISC to select the disc source.
2Lift the CD door on the top of the system
to open the CD compartment.
3Insert a disc with the printed side facing up
and press down the CD door to close the
CD compartment.
4Press to start playback.
1 Fortherightspeaker,ndthesocketson
the main unit marked ‘RIGHT’.
2Insert the red wire to the red (+) socket.
3Insert the black wire into the black (-)
socket.
4 Fortheleftspeaker,ndthesocketsonthe
main unit marked ‘LEFT’.
5Repeat steps 2-3.
1Connect the power adaptor to the wall
outlet.
DCB146_12_QSG_EN_V1.1.indd 2 2010-6-10 16:16:44

C
D
E
Play from iPod
Tune to DAB stations
Program and tune to FM stations
1Press SOURCE to select DAB to start an
automatic search of available DAB stations.
2Press / to change the DAB stations.
3Press OKtoconrmaselection.
4 Toperformascan,pressbrieySCAN.
5To access setup options, press MENU
then use the navigation control buttons to
select.
1Select TUNER source.
2Press SCAN for more than two seconds to
program all available stations (FM only).
3Press / to select the desired preset
station.
Tip
Detailed playback features and additional•
functions are described in the accompanied user
manual.
MIC
PUSH TO OPEN
DOCK FOR iPOD
RO SYSTEMDCB146
SOURCE
DOCK
STANDBY-ON
CD/CD-R/CD-RW COMPAT IBLE
PRESET
iR
VOL
VOL
TUNING
1Select a dock adaptor (supplied) that
matches your iPod type.
2Press PUSH TO OPEN to open the dock
on the main unit.
3Snap the suitable dock adaptor into the
dock on the main unit.
4Plug your iPod into the dock adaptor.
5Press iPod on the remote control to select
iPod source.
The connected iPod plays automatically.»
DCB146_12_QSG_EN_V1.1.indd 3 2010-6-10 16:16:45

© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
DCB146_12_QSG_V1.1
FSet clock
1Press and hold CLOCK/DISPLAY on the
remote control for 2 seconds.
2Press PROG repeatedly to select 12 hour
or 24 hour format.
3Press CLOCK/DISPLAYtoconrmthe
selection.
4Press / to set the hour.
5Press CLOCK/DISPLAYtoconrmthe
hour setting.
6Press / to set the minute.
7Press CLOCK/DISPLAYtoconrmthe
setting.
DCB146_12_QSG_EN_V1.1.indd 4 2010-6-10 16:16:46