Philips MCM166/07 User manual

MCM166
What’s in the Box?
You should find these items upon opening the box.
Quick Start Guide
Remote Control
Quick Start Guide User Manual
1 x MP3 link cable
MCM166_37_QSG_Eng.indd 1MCM166_37_QSG_Eng.indd 1 5/25/2009 4:29:15 PM5/25/2009 4:29:15 PM

1
2
Connect the speaker cables.
Speaker
(right)
Speaker
(left)
FM antenna
AC power
Tip
See the User Manual on how to
connect other equipment to this
system.
Connect the AC power cord to the wall
socket.
5
3
7
6
4
2
Set clock
1
Press and hold CLOCK (or CLOCK/DISPLAY on the remote control) to activate the clock
setting mode.
The 12 hour or 24 hour format is displayed.
«
Press PROG repeatedly to select 12 hour or 24 hour format.
Press CLOCK (or CLOCK/DISPLAY on the remote control) to confirm.
The hour digits are displayed and begin to blink.
«
Press §/ ∞(or 5/ 6on the remote control) to set the hour.
Press CLOCK (or CLOCK/DISPLAY on the remote control) to confirm.
The minute digits are displayed and begin to blink.
«
Press §/ ∞(or 5/ 6on the remote control) to set the minute.
Press CLOCK (or CLOCK/DISPLAY on the remote control) to confirm.
MCM166_37_QSG_Eng.indd 2MCM166_37_QSG_Eng.indd 2 5/25/2009 4:29:19 PM5/25/2009 4:29:19 PM

4
3
2
1
Play disc
Press SOURCE (or DISC on the remote control) to select the disc source.
Lift the top panel to open the disc tray.
Insert a disc with the printed side facing up, then close the disc tray.
Press ÉÅ to start play.
To stop play, press
9.
5
1
2
3
Insert the USB device’s USB plug into the socket on the main unit.
Press SOURCE once or more (or USB on the remote control) to select USB.
Play the USB’s audio files as you do with the albums/tracks on a CD.
Play USB
With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1),
USB flash players (USB 2.0 or USB1.1), memory cards (requires an additional card reader to
work with this Hi-Fi system).
MCM166_37_QSG_Eng.indd 3MCM166_37_QSG_Eng.indd 3 5/25/2009 4:29:20 PM5/25/2009 4:29:20 PM

1
2
3
Press SOURCE (or TUN on the remote control) repeatedly to select FM or MW.
Press PROG for more than two seconds to program all available stations in order of wave-
band.
Press
PRESET/ALBUM +/- (or ABL/PRESET +/- on the remote control) to select a preset
number.
Listen to radio
MCM166_07_QSG_V2.0
Tip
Detailed play features and additional functions are described in the supplied user
manual.
CRoyal Philips Electronics N.V. 2009
All rights reserved.
http://www.philips.com
MCM166_37_QSG_Eng.indd 4MCM166_37_QSG_Eng.indd 4 5/25/2009 4:29:22 PM5/25/2009 4:29:22 PM